A study of the effect of conformal cooling on part temperature

Jonathan Meckley, Robert Edwards

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

This project examines the temperature differences between parts molded in P20 and rapid tooling inserts. A P20 insert was used as a baseline to compare the two sets of rapid tooling inserts. One of the rapid tooling inserts had the conventional cooling lines similar to the P20 insert. The other rapid tooling insert had conformal cooling lines. The temperatures were recorded as the parts came out of the mold.

Original languageEnglish (US)
Title of host publicationSociety of Plastics Engineers - 66th Annual Technical Conference of the Society of Plastics Engineers, Plastics Encounter at ANTEC 2008
Pages483-488
Number of pages6
Volume1
StatePublished - 2008
Event66th Annual Technical Conference of the Society of Plastics Engineers, Plastics Encounter at ANTEC 2008 - Milwaukee, WI, United States
Duration: May 4 2008May 8 2008

Other

Other66th Annual Technical Conference of the Society of Plastics Engineers, Plastics Encounter at ANTEC 2008
CountryUnited States
CityMilwaukee, WI
Period5/4/085/8/08

Fingerprint

Cooling
Temperature

All Science Journal Classification (ASJC) codes

  • Industrial and Manufacturing Engineering
  • Materials Chemistry
  • Polymers and Plastics

Cite this

Meckley, J., & Edwards, R. (2008). A study of the effect of conformal cooling on part temperature. In Society of Plastics Engineers - 66th Annual Technical Conference of the Society of Plastics Engineers, Plastics Encounter at ANTEC 2008 (Vol. 1, pp. 483-488)
Meckley, Jonathan ; Edwards, Robert. / A study of the effect of conformal cooling on part temperature. Society of Plastics Engineers - 66th Annual Technical Conference of the Society of Plastics Engineers, Plastics Encounter at ANTEC 2008. Vol. 1 2008. pp. 483-488
@inproceedings{3b551af97013444a9bb19ac92d7402c0,
title = "A study of the effect of conformal cooling on part temperature",
abstract = "This project examines the temperature differences between parts molded in P20 and rapid tooling inserts. A P20 insert was used as a baseline to compare the two sets of rapid tooling inserts. One of the rapid tooling inserts had the conventional cooling lines similar to the P20 insert. The other rapid tooling insert had conformal cooling lines. The temperatures were recorded as the parts came out of the mold.",
author = "Jonathan Meckley and Robert Edwards",
year = "2008",
language = "English (US)",
isbn = "9781605603209",
volume = "1",
pages = "483--488",
booktitle = "Society of Plastics Engineers - 66th Annual Technical Conference of the Society of Plastics Engineers, Plastics Encounter at ANTEC 2008",

}

Meckley, J & Edwards, R 2008, A study of the effect of conformal cooling on part temperature. in Society of Plastics Engineers - 66th Annual Technical Conference of the Society of Plastics Engineers, Plastics Encounter at ANTEC 2008. vol. 1, pp. 483-488, 66th Annual Technical Conference of the Society of Plastics Engineers, Plastics Encounter at ANTEC 2008, Milwaukee, WI, United States, 5/4/08.

A study of the effect of conformal cooling on part temperature. / Meckley, Jonathan; Edwards, Robert.

Society of Plastics Engineers - 66th Annual Technical Conference of the Society of Plastics Engineers, Plastics Encounter at ANTEC 2008. Vol. 1 2008. p. 483-488.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - A study of the effect of conformal cooling on part temperature

AU - Meckley, Jonathan

AU - Edwards, Robert

PY - 2008

Y1 - 2008

N2 - This project examines the temperature differences between parts molded in P20 and rapid tooling inserts. A P20 insert was used as a baseline to compare the two sets of rapid tooling inserts. One of the rapid tooling inserts had the conventional cooling lines similar to the P20 insert. The other rapid tooling insert had conformal cooling lines. The temperatures were recorded as the parts came out of the mold.

AB - This project examines the temperature differences between parts molded in P20 and rapid tooling inserts. A P20 insert was used as a baseline to compare the two sets of rapid tooling inserts. One of the rapid tooling inserts had the conventional cooling lines similar to the P20 insert. The other rapid tooling insert had conformal cooling lines. The temperatures were recorded as the parts came out of the mold.

UR - http://www.scopus.com/inward/record.url?scp=52349110646&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=52349110646&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:52349110646

SN - 9781605603209

VL - 1

SP - 483

EP - 488

BT - Society of Plastics Engineers - 66th Annual Technical Conference of the Society of Plastics Engineers, Plastics Encounter at ANTEC 2008

ER -

Meckley J, Edwards R. A study of the effect of conformal cooling on part temperature. In Society of Plastics Engineers - 66th Annual Technical Conference of the Society of Plastics Engineers, Plastics Encounter at ANTEC 2008. Vol. 1. 2008. p. 483-488