Adaptive droop control for effective power sharing in multi-terminal DC (MTDC) grids

Nilanjan Ray Chaudhuri, Balarko Chaudhuri

Research output: Contribution to journalArticlepeer-review

224 Scopus citations

Abstract

Following a converter outage in a Multi-Terminal DC (MTDC) grid, it is critical that the healthy converter stations share the power mismatch/burden in a desirable way. A fixed value of power-voltage droop in the DC link voltage control loops can ensure proper distribution according to the converter ratings. Here a scheme for adapting the droop coefficients to share the burden according to the available headroom of each converter station is proposed. Advantage of this adaptive (variable) droop scheme for autonomous power sharing is established through transient simulations on an MTDC grid with four bipolar converters and DC cable network with metallic return. Results for both rectifier and inverter outages under two different scenarios are presented. Post-contingency steady-state operating points obtained from transient simulation are shown to be consistent with those derived analytically. Impact of varying droop coefficients on the stability of the MTDC grid is established. An averaged model in Matlab/SIMULINK which has been validated against detailed switched model in EMTDC/PSCAD is used for the stability and modal analysis.

Original languageEnglish (US)
Article number6242419
Pages (from-to)21-29
Number of pages9
JournalIEEE Transactions on Power Systems
Volume28
Issue number1
DOIs
StatePublished - 2013

All Science Journal Classification (ASJC) codes

  • Energy Engineering and Power Technology
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'Adaptive droop control for effective power sharing in multi-terminal DC (MTDC) grids'. Together they form a unique fingerprint.

Cite this