Alternative Plasma-Facing-Material Concepts for Extreme Plasma-Burning Nuclear Fusion Environments

Research output: Contribution to journalArticle

Abstract

One of the most significant design challenges for materials performance exposed to extreme environments (e.g., heat, pressure, and radiation) is maintaining structural integrity while preventing or minimizing long-term damage. In a fusion nuclear reactor the expected operational environment is inherently extreme. The incident plasma will carry heat fluxes of the order of hundreds of MW‧m−2 and particle fluxes that can average 1024 m−2‧s−1 to plasma-facing components (PFCs). The fusion reactor wall will also need to operate at high temperatures near 800 C, and the incident energy of particles will vary from a few electron-volt ions to mega-electron-volt neutrons. The plasma-material interface is a critical region for design since material can be emitted both atomistically (e.g., through evaporation, sputtering, etc.) and/or macroscopically (i.e., during transient events, such as disruptions or edge-localized modes and dust generation) potentially poisoning the fusion plasma. Another challenge is the management of structural damage from neutrons up to hundreds of displacements per atom and transmuted He near 1000 atomic parts per million. Operating duty cycles will demand reliable performance over the course of not just seconds or minutes (i.e., as in most advanced fusion devices today and in the near future) but from months to years. Transformative innovations that can address these significant challenges are opening opportunities in adopting new and novel approaches. Controlling the architecture in advanced materials to tailor properties beyond structure and composition has provided a new paradigm in modern materials design. Tuning properties at localized regions of a cellular material to meet specific functional requirements introduces challenges to modern synthesis and advanced manufacturing methods. Beyond the design of bulk properties in cellular materials is the ability to also design smart, self-healing interfaces. This is particularly important for applications designing advanced materials for future reactor-relevant fusion environments. This paper will give an overview of both the technological gaps and the opportunities from advanced manufacturing that may enable the design of self-healing, adaptive materials for PFCs in future fusion reactor environments. Current progress as well as important innovation challenges will also be discussed.

Original languageEnglish (US)
Pages (from-to)702-718
Number of pages17
JournalFusion Science and Technology
Volume75
Issue number7
DOIs
StatePublished - Oct 3 2019

Fingerprint

Facings
nuclear fusion
Fusion reactions
Plasmas
fusion reactors
Fusion reactors
fusion
healing
foams
manufacturing
damage
neutrons
poisoning
nuclear reactors
Neutrons
Innovation
flux (rate)
integrity
heat flux
electrons

All Science Journal Classification (ASJC) codes

  • Civil and Structural Engineering
  • Nuclear and High Energy Physics
  • Nuclear Energy and Engineering
  • Materials Science(all)
  • Mechanical Engineering

Cite this

@article{f887fefeeab54776a6be6a4e2b07f145,
title = "Alternative Plasma-Facing-Material Concepts for Extreme Plasma-Burning Nuclear Fusion Environments",
abstract = "One of the most significant design challenges for materials performance exposed to extreme environments (e.g., heat, pressure, and radiation) is maintaining structural integrity while preventing or minimizing long-term damage. In a fusion nuclear reactor the expected operational environment is inherently extreme. The incident plasma will carry heat fluxes of the order of hundreds of MW‧m−2 and particle fluxes that can average 1024 m−2‧s−1 to plasma-facing components (PFCs). The fusion reactor wall will also need to operate at high temperatures near 800 C, and the incident energy of particles will vary from a few electron-volt ions to mega-electron-volt neutrons. The plasma-material interface is a critical region for design since material can be emitted both atomistically (e.g., through evaporation, sputtering, etc.) and/or macroscopically (i.e., during transient events, such as disruptions or edge-localized modes and dust generation) potentially poisoning the fusion plasma. Another challenge is the management of structural damage from neutrons up to hundreds of displacements per atom and transmuted He near 1000 atomic parts per million. Operating duty cycles will demand reliable performance over the course of not just seconds or minutes (i.e., as in most advanced fusion devices today and in the near future) but from months to years. Transformative innovations that can address these significant challenges are opening opportunities in adopting new and novel approaches. Controlling the architecture in advanced materials to tailor properties beyond structure and composition has provided a new paradigm in modern materials design. Tuning properties at localized regions of a cellular material to meet specific functional requirements introduces challenges to modern synthesis and advanced manufacturing methods. Beyond the design of bulk properties in cellular materials is the ability to also design smart, self-healing interfaces. This is particularly important for applications designing advanced materials for future reactor-relevant fusion environments. This paper will give an overview of both the technological gaps and the opportunities from advanced manufacturing that may enable the design of self-healing, adaptive materials for PFCs in future fusion reactor environments. Current progress as well as important innovation challenges will also be discussed.",
author = "Allain, {J. P.}",
year = "2019",
month = "10",
day = "3",
doi = "10.1080/15361055.2019.1647030",
language = "English (US)",
volume = "75",
pages = "702--718",
journal = "Fusion Science and Technology",
issn = "1536-1055",
publisher = "American Nuclear Society",
number = "7",

}

Alternative Plasma-Facing-Material Concepts for Extreme Plasma-Burning Nuclear Fusion Environments. / Allain, J. P.

In: Fusion Science and Technology, Vol. 75, No. 7, 03.10.2019, p. 702-718.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Alternative Plasma-Facing-Material Concepts for Extreme Plasma-Burning Nuclear Fusion Environments

AU - Allain, J. P.

PY - 2019/10/3

Y1 - 2019/10/3

N2 - One of the most significant design challenges for materials performance exposed to extreme environments (e.g., heat, pressure, and radiation) is maintaining structural integrity while preventing or minimizing long-term damage. In a fusion nuclear reactor the expected operational environment is inherently extreme. The incident plasma will carry heat fluxes of the order of hundreds of MW‧m−2 and particle fluxes that can average 1024 m−2‧s−1 to plasma-facing components (PFCs). The fusion reactor wall will also need to operate at high temperatures near 800 C, and the incident energy of particles will vary from a few electron-volt ions to mega-electron-volt neutrons. The plasma-material interface is a critical region for design since material can be emitted both atomistically (e.g., through evaporation, sputtering, etc.) and/or macroscopically (i.e., during transient events, such as disruptions or edge-localized modes and dust generation) potentially poisoning the fusion plasma. Another challenge is the management of structural damage from neutrons up to hundreds of displacements per atom and transmuted He near 1000 atomic parts per million. Operating duty cycles will demand reliable performance over the course of not just seconds or minutes (i.e., as in most advanced fusion devices today and in the near future) but from months to years. Transformative innovations that can address these significant challenges are opening opportunities in adopting new and novel approaches. Controlling the architecture in advanced materials to tailor properties beyond structure and composition has provided a new paradigm in modern materials design. Tuning properties at localized regions of a cellular material to meet specific functional requirements introduces challenges to modern synthesis and advanced manufacturing methods. Beyond the design of bulk properties in cellular materials is the ability to also design smart, self-healing interfaces. This is particularly important for applications designing advanced materials for future reactor-relevant fusion environments. This paper will give an overview of both the technological gaps and the opportunities from advanced manufacturing that may enable the design of self-healing, adaptive materials for PFCs in future fusion reactor environments. Current progress as well as important innovation challenges will also be discussed.

AB - One of the most significant design challenges for materials performance exposed to extreme environments (e.g., heat, pressure, and radiation) is maintaining structural integrity while preventing or minimizing long-term damage. In a fusion nuclear reactor the expected operational environment is inherently extreme. The incident plasma will carry heat fluxes of the order of hundreds of MW‧m−2 and particle fluxes that can average 1024 m−2‧s−1 to plasma-facing components (PFCs). The fusion reactor wall will also need to operate at high temperatures near 800 C, and the incident energy of particles will vary from a few electron-volt ions to mega-electron-volt neutrons. The plasma-material interface is a critical region for design since material can be emitted both atomistically (e.g., through evaporation, sputtering, etc.) and/or macroscopically (i.e., during transient events, such as disruptions or edge-localized modes and dust generation) potentially poisoning the fusion plasma. Another challenge is the management of structural damage from neutrons up to hundreds of displacements per atom and transmuted He near 1000 atomic parts per million. Operating duty cycles will demand reliable performance over the course of not just seconds or minutes (i.e., as in most advanced fusion devices today and in the near future) but from months to years. Transformative innovations that can address these significant challenges are opening opportunities in adopting new and novel approaches. Controlling the architecture in advanced materials to tailor properties beyond structure and composition has provided a new paradigm in modern materials design. Tuning properties at localized regions of a cellular material to meet specific functional requirements introduces challenges to modern synthesis and advanced manufacturing methods. Beyond the design of bulk properties in cellular materials is the ability to also design smart, self-healing interfaces. This is particularly important for applications designing advanced materials for future reactor-relevant fusion environments. This paper will give an overview of both the technological gaps and the opportunities from advanced manufacturing that may enable the design of self-healing, adaptive materials for PFCs in future fusion reactor environments. Current progress as well as important innovation challenges will also be discussed.

UR - http://www.scopus.com/inward/record.url?scp=85073250989&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85073250989&partnerID=8YFLogxK

U2 - 10.1080/15361055.2019.1647030

DO - 10.1080/15361055.2019.1647030

M3 - Article

AN - SCOPUS:85073250989

VL - 75

SP - 702

EP - 718

JO - Fusion Science and Technology

JF - Fusion Science and Technology

SN - 1536-1055

IS - 7

ER -