An assessment of CFD-based wall heat transfer models in piston engines

A. Sircar, C. Paul, S. Ferreyro-Fernandez, A. Imren, D. C. Haworth

Research output: Contribution to conferencePaper

Abstract

The lack of accurate submodels for in-cylinder heat transfer has been identified as a key shortcoming in developing truly predictive, physics-based computational fluid dynamics (CFD) models that can be used to develop combustion systems for advanced high-efficiency, low-emissions engines. Only recently have experimental methods become available that enable accurate near-wall measurements to enhance simulation capability via advancing models. Initial results show crank-angle dependent discrepancies with respect to previously used boundary-layer models of up to 100%. However, available experimental data is quite sparse (only few data points on engine walls) and limited (available measurements are those of heat flux only). Predictive submodels are needed for medium-resolution ("engineering") LES and for unsteady Reynolds-averaged simulations (URANS). Recently, some research groups have performed DNS studies on engine-relevant conditions using simple geometries. These provide very useful data for benchmarking wall heat transfer models under such conditions. Further, a number of new and more sophisticated models have also become available in the literature which account for these engine-like conditions. Some of these have been incorporated while others of a more complex nature, which include solving additional partial differential equations (PDEs) within the thin boundary layer near the wall, are underway. These models will then be tested against the available DNS/experimental data in both SI (spark-ignition) and CI (compression-ignition) engines.

Original languageEnglish (US)
Publication statusPublished - Jan 1 2017
Event10th U.S. National Combustion Meeting - College Park, United States
Duration: Apr 23 2017Apr 26 2017

Other

Other10th U.S. National Combustion Meeting
CountryUnited States
CityCollege Park
Period4/23/174/26/17

    Fingerprint

All Science Journal Classification (ASJC) codes

  • Chemical Engineering(all)
  • Physical and Theoretical Chemistry
  • Mechanical Engineering

Cite this

Sircar, A., Paul, C., Ferreyro-Fernandez, S., Imren, A., & Haworth, D. C. (2017). An assessment of CFD-based wall heat transfer models in piston engines. Paper presented at 10th U.S. National Combustion Meeting, College Park, United States.