An assessment of farm scale biomass pelleting in the Northeast

Research output: Contribution to journalArticle

4 Citations (Scopus)

Abstract

Farm scale pellet production is a promising opportunity for farmers and landowners interested in producing a renewable biomass fuel. However, the true costs and performance of these systems in a farm setting is not fully understood. A feasibility analysis was carried out on the farm-scale switchgrass production operation at Wood Crest Farm near Berwick, PA as a representative example of operations in the region. Farmer interviews and direct measurements of equipment performance, energy use, and labor requirements were recorded for all stages of the operation. Results indicate that the production of pellets at this facility costs $98 per tonne, excluding labor, equipment and land purchase costs. As such, this represents a “bare bones” operating cost. Including the cost of labor brings the cost to about $307 per tonne. Thus, production may only be economically feasible when land, equipment, and labor are available at marginal or reduced cost. Every joule of energy input into the operation yielded 7.8 J of energy in the pellet fuel. There appears to be potential to reduce operating costs by increasing pelletizer yield and/or automating pelletizer operations - two opportunities for engineered solutions in this sector that can render the operation financially viable even when labor costs are included. On-farm pelleting in the Northeast US appears to have potential to be cost competitive with commercial wood pellets in select scenarios, and has the potential to be more widely applicable if modest improvements are made to process efficiency.

Original languageEnglish (US)
Pages (from-to)85-91
Number of pages7
JournalRenewable Energy
Volume108
DOIs
StatePublished - Jan 1 2017

Fingerprint

Pelletizing
Farms
Biomass
Personnel
Costs
Operating costs
Wood
Ore pellets
Bone

All Science Journal Classification (ASJC) codes

  • Renewable Energy, Sustainability and the Environment

Cite this

@article{bd299b2865fa4bdd99af8bab5e3d1875,
title = "An assessment of farm scale biomass pelleting in the Northeast",
abstract = "Farm scale pellet production is a promising opportunity for farmers and landowners interested in producing a renewable biomass fuel. However, the true costs and performance of these systems in a farm setting is not fully understood. A feasibility analysis was carried out on the farm-scale switchgrass production operation at Wood Crest Farm near Berwick, PA as a representative example of operations in the region. Farmer interviews and direct measurements of equipment performance, energy use, and labor requirements were recorded for all stages of the operation. Results indicate that the production of pellets at this facility costs $98 per tonne, excluding labor, equipment and land purchase costs. As such, this represents a “bare bones” operating cost. Including the cost of labor brings the cost to about $307 per tonne. Thus, production may only be economically feasible when land, equipment, and labor are available at marginal or reduced cost. Every joule of energy input into the operation yielded 7.8 J of energy in the pellet fuel. There appears to be potential to reduce operating costs by increasing pelletizer yield and/or automating pelletizer operations - two opportunities for engineered solutions in this sector that can render the operation financially viable even when labor costs are included. On-farm pelleting in the Northeast US appears to have potential to be cost competitive with commercial wood pellets in select scenarios, and has the potential to be more widely applicable if modest improvements are made to process efficiency.",
author = "Ciolkosz, {Daniel Edward} and Jacobson, {Michael Gregory} and Nichole Heil and Will Brandau",
year = "2017",
month = "1",
day = "1",
doi = "10.1016/j.renene.2017.02.025",
language = "English (US)",
volume = "108",
pages = "85--91",
journal = "Renewable Energy",
issn = "0960-1481",
publisher = "Elsevier BV",

}

An assessment of farm scale biomass pelleting in the Northeast. / Ciolkosz, Daniel Edward; Jacobson, Michael Gregory; Heil, Nichole; Brandau, Will.

In: Renewable Energy, Vol. 108, 01.01.2017, p. 85-91.

Research output: Contribution to journalArticle

TY - JOUR

T1 - An assessment of farm scale biomass pelleting in the Northeast

AU - Ciolkosz, Daniel Edward

AU - Jacobson, Michael Gregory

AU - Heil, Nichole

AU - Brandau, Will

PY - 2017/1/1

Y1 - 2017/1/1

N2 - Farm scale pellet production is a promising opportunity for farmers and landowners interested in producing a renewable biomass fuel. However, the true costs and performance of these systems in a farm setting is not fully understood. A feasibility analysis was carried out on the farm-scale switchgrass production operation at Wood Crest Farm near Berwick, PA as a representative example of operations in the region. Farmer interviews and direct measurements of equipment performance, energy use, and labor requirements were recorded for all stages of the operation. Results indicate that the production of pellets at this facility costs $98 per tonne, excluding labor, equipment and land purchase costs. As such, this represents a “bare bones” operating cost. Including the cost of labor brings the cost to about $307 per tonne. Thus, production may only be economically feasible when land, equipment, and labor are available at marginal or reduced cost. Every joule of energy input into the operation yielded 7.8 J of energy in the pellet fuel. There appears to be potential to reduce operating costs by increasing pelletizer yield and/or automating pelletizer operations - two opportunities for engineered solutions in this sector that can render the operation financially viable even when labor costs are included. On-farm pelleting in the Northeast US appears to have potential to be cost competitive with commercial wood pellets in select scenarios, and has the potential to be more widely applicable if modest improvements are made to process efficiency.

AB - Farm scale pellet production is a promising opportunity for farmers and landowners interested in producing a renewable biomass fuel. However, the true costs and performance of these systems in a farm setting is not fully understood. A feasibility analysis was carried out on the farm-scale switchgrass production operation at Wood Crest Farm near Berwick, PA as a representative example of operations in the region. Farmer interviews and direct measurements of equipment performance, energy use, and labor requirements were recorded for all stages of the operation. Results indicate that the production of pellets at this facility costs $98 per tonne, excluding labor, equipment and land purchase costs. As such, this represents a “bare bones” operating cost. Including the cost of labor brings the cost to about $307 per tonne. Thus, production may only be economically feasible when land, equipment, and labor are available at marginal or reduced cost. Every joule of energy input into the operation yielded 7.8 J of energy in the pellet fuel. There appears to be potential to reduce operating costs by increasing pelletizer yield and/or automating pelletizer operations - two opportunities for engineered solutions in this sector that can render the operation financially viable even when labor costs are included. On-farm pelleting in the Northeast US appears to have potential to be cost competitive with commercial wood pellets in select scenarios, and has the potential to be more widely applicable if modest improvements are made to process efficiency.

UR - http://www.scopus.com/inward/record.url?scp=85013917511&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85013917511&partnerID=8YFLogxK

U2 - 10.1016/j.renene.2017.02.025

DO - 10.1016/j.renene.2017.02.025

M3 - Article

AN - SCOPUS:85013917511

VL - 108

SP - 85

EP - 91

JO - Renewable Energy

JF - Renewable Energy

SN - 0960-1481

ER -