An experimental study of combustor exit profile shapes on endwall heat transfer in high pressure turbine vanes

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Scopus citations

Abstract

The design and development of current and future gas turbine engines for aircraft propulsion have focused on operating the high pressure turbine at increasingly elevated temperatures and pressures. The drive towards thermal operating conditions near theoretical stoichiometric limits as well as increasingly stringent requirements on reducing harmful emissions, both equate to the temperature profiles exiting combustors and entering turbines becoming less peaked than in the past. This drive has placed emphasis on determining how different types of inlet temperature and pressure profiles affect the first stage airfoil endwalls. The goal of the current study was to investigate how different radial profiles of temperature and pressure affect the heat transfer along the vane endwall in a high pressure turbine. Testing was performed in the Turbine Research Facility located at the Air Force Research Laboratory using an inlet profile generator. Results indicate that the convection heat transfer coefficients are influenced by both the inlet pressure profile shape and the location along the endwall. The heat transfer driving temperature for inlet profiles that are non-uniform in temperature is also discussed.

Original languageEnglish (US)
Title of host publicationProceedings of the ASME Turbo Expo 2007 - Power for Land, Sea, and Air
Pages1323-1334
Number of pages12
DOIs
Publication statusPublished - Sep 24 2007
Event2007 ASME Turbo Expo - Montreal, Que., Canada
Duration: May 14 2007May 17 2007

Publication series

NameProceedings of the ASME Turbo Expo
Volume4 PART B

Other

Other2007 ASME Turbo Expo
CountryCanada
CityMontreal, Que.
Period5/14/075/17/07

    Fingerprint

All Science Journal Classification (ASJC) codes

  • Engineering(all)

Cite this

Barringer, M. D., Thole, K. A., & Polanka, M. D. (2007). An experimental study of combustor exit profile shapes on endwall heat transfer in high pressure turbine vanes. In Proceedings of the ASME Turbo Expo 2007 - Power for Land, Sea, and Air (pp. 1323-1334). (Proceedings of the ASME Turbo Expo; Vol. 4 PART B). https://doi.org/10.1115/GT2007-27156