An investigation of acceleration and jerk profiles of public transportation vehicles

Delton Martin, Dale Henry Litwhiler

Research output: Contribution to journalConference article

5 Citations (Scopus)

Abstract

The acceleration and braking profiles of several public transportation vehicles were investigated as part of an independent undergraduate student research project in Electro-Mechanical Engineering Technology. In particular, vehicles in which the passengers are often required to stand while the vehicle is moving were studied. These vehicles include city buses and subway trains. Vehicle acceleration, either positive or negative (braking), and the time rate of change of acceleration, jerk, can have a significant impact on the safety and comfort of passengers. The effects of acceleration and jerk are especially troublesome for passengers that either choose to stand or must stand in the vehicle because no empty seats are available. A standing passenger has a higher center of mass and smaller base footprint than one that is seated. The standing position is also less stable than the seated position. Therefore as the vehicle accelerates or changes its acceleration, standing passengers must exert significant forces with their limbs to maintain their balance. In this paper, the instrumentation and software used to measure the acceleration and jerk of some public transportation vehicles are presented and discussed. Instrumentation hardware and software typically used in an engineering technology laboratory was used for these measurements. The data obtained from the testing of several vehicles is analyzed and interpreted using software and techniques familiar to undergraduate engineering technology students. Fundamental dynamics associated with the human passengers is also presented and discussed. Careful control of the acceleration and braking profile of the vehicle can greatly improve the comfort and safety of the passengers. A suggested instrumentation and display system to help drivers control the acceleration profiles to improve passenger safety is presented. This project utilizes many aspects of the course and laboratory work of the four-year electro-mechanical engineering technology program. No human subjects were used in this study.

Original languageEnglish (US)
JournalASEE Annual Conference and Exposition, Conference Proceedings
StatePublished - Jan 1 2008

Fingerprint

Engineering technology
Braking
Mechanical engineering
Students
Subways
Seats
Display devices
Hardware
Testing

All Science Journal Classification (ASJC) codes

  • Engineering(all)

Cite this

@article{8b790504da4d419186eb1b789c8ab612,
title = "An investigation of acceleration and jerk profiles of public transportation vehicles",
abstract = "The acceleration and braking profiles of several public transportation vehicles were investigated as part of an independent undergraduate student research project in Electro-Mechanical Engineering Technology. In particular, vehicles in which the passengers are often required to stand while the vehicle is moving were studied. These vehicles include city buses and subway trains. Vehicle acceleration, either positive or negative (braking), and the time rate of change of acceleration, jerk, can have a significant impact on the safety and comfort of passengers. The effects of acceleration and jerk are especially troublesome for passengers that either choose to stand or must stand in the vehicle because no empty seats are available. A standing passenger has a higher center of mass and smaller base footprint than one that is seated. The standing position is also less stable than the seated position. Therefore as the vehicle accelerates or changes its acceleration, standing passengers must exert significant forces with their limbs to maintain their balance. In this paper, the instrumentation and software used to measure the acceleration and jerk of some public transportation vehicles are presented and discussed. Instrumentation hardware and software typically used in an engineering technology laboratory was used for these measurements. The data obtained from the testing of several vehicles is analyzed and interpreted using software and techniques familiar to undergraduate engineering technology students. Fundamental dynamics associated with the human passengers is also presented and discussed. Careful control of the acceleration and braking profile of the vehicle can greatly improve the comfort and safety of the passengers. A suggested instrumentation and display system to help drivers control the acceleration profiles to improve passenger safety is presented. This project utilizes many aspects of the course and laboratory work of the four-year electro-mechanical engineering technology program. No human subjects were used in this study.",
author = "Delton Martin and Litwhiler, {Dale Henry}",
year = "2008",
month = "1",
day = "1",
language = "English (US)",
journal = "ASEE Annual Conference and Exposition, Conference Proceedings",
issn = "2153-5965",

}

TY - JOUR

T1 - An investigation of acceleration and jerk profiles of public transportation vehicles

AU - Martin, Delton

AU - Litwhiler, Dale Henry

PY - 2008/1/1

Y1 - 2008/1/1

N2 - The acceleration and braking profiles of several public transportation vehicles were investigated as part of an independent undergraduate student research project in Electro-Mechanical Engineering Technology. In particular, vehicles in which the passengers are often required to stand while the vehicle is moving were studied. These vehicles include city buses and subway trains. Vehicle acceleration, either positive or negative (braking), and the time rate of change of acceleration, jerk, can have a significant impact on the safety and comfort of passengers. The effects of acceleration and jerk are especially troublesome for passengers that either choose to stand or must stand in the vehicle because no empty seats are available. A standing passenger has a higher center of mass and smaller base footprint than one that is seated. The standing position is also less stable than the seated position. Therefore as the vehicle accelerates or changes its acceleration, standing passengers must exert significant forces with their limbs to maintain their balance. In this paper, the instrumentation and software used to measure the acceleration and jerk of some public transportation vehicles are presented and discussed. Instrumentation hardware and software typically used in an engineering technology laboratory was used for these measurements. The data obtained from the testing of several vehicles is analyzed and interpreted using software and techniques familiar to undergraduate engineering technology students. Fundamental dynamics associated with the human passengers is also presented and discussed. Careful control of the acceleration and braking profile of the vehicle can greatly improve the comfort and safety of the passengers. A suggested instrumentation and display system to help drivers control the acceleration profiles to improve passenger safety is presented. This project utilizes many aspects of the course and laboratory work of the four-year electro-mechanical engineering technology program. No human subjects were used in this study.

AB - The acceleration and braking profiles of several public transportation vehicles were investigated as part of an independent undergraduate student research project in Electro-Mechanical Engineering Technology. In particular, vehicles in which the passengers are often required to stand while the vehicle is moving were studied. These vehicles include city buses and subway trains. Vehicle acceleration, either positive or negative (braking), and the time rate of change of acceleration, jerk, can have a significant impact on the safety and comfort of passengers. The effects of acceleration and jerk are especially troublesome for passengers that either choose to stand or must stand in the vehicle because no empty seats are available. A standing passenger has a higher center of mass and smaller base footprint than one that is seated. The standing position is also less stable than the seated position. Therefore as the vehicle accelerates or changes its acceleration, standing passengers must exert significant forces with their limbs to maintain their balance. In this paper, the instrumentation and software used to measure the acceleration and jerk of some public transportation vehicles are presented and discussed. Instrumentation hardware and software typically used in an engineering technology laboratory was used for these measurements. The data obtained from the testing of several vehicles is analyzed and interpreted using software and techniques familiar to undergraduate engineering technology students. Fundamental dynamics associated with the human passengers is also presented and discussed. Careful control of the acceleration and braking profile of the vehicle can greatly improve the comfort and safety of the passengers. A suggested instrumentation and display system to help drivers control the acceleration profiles to improve passenger safety is presented. This project utilizes many aspects of the course and laboratory work of the four-year electro-mechanical engineering technology program. No human subjects were used in this study.

UR - http://www.scopus.com/inward/record.url?scp=85029068422&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85029068422&partnerID=8YFLogxK

M3 - Conference article

AN - SCOPUS:85029068422

JO - ASEE Annual Conference and Exposition, Conference Proceedings

JF - ASEE Annual Conference and Exposition, Conference Proceedings

SN - 2153-5965

ER -