Analysis of reactivity insertion accidents for the NIST research reactor before and after fuel conversion

J. S. Baek, A. Cuadra, L. Y. Cheng, A. L. Hanson, N. R. Brown, D. J. Diamond

    Research output: Contribution to journalArticle

    3 Scopus citations

    Abstract

    Reactivity insertion accidents have been analyzed for the 20-MW D 2O-moderated research reactor (NBSR) at the National Institute of Standards and Technology (NIST). The analysis has been carried out for the present core, which contains highly enriched uranium fuel, and for a proposed equilibrium core with low-enriched uranium fuel. The time-dependent analysis of the primary system is performed with a RELAP5 model that includes the reactor vessel, primary coolant pump, heat exchanger, fuel element geometry, and flow channels for both the 6 inner and 24 outer fuel elements. Postprocessing of the simulation results has been conducted to evaluate minimum critical heat flux CHF ratio and minimum onset of flow instability OFI ratio using the Sudo-Kaminaga correlations and Saha-Zuber criteria, respectively. Evaluations are carried out for the control rod withdrawal start-up accident and the maximum reactivity insertion accident. In both cases the RELAP5 results indicate that no damage to the fuel will occur and there is adequate margin to CHF and OFI because of sufficient coolant flow through the fuel channels and the negative reactivity insertion due to scram.

    Original languageEnglish (US)
    Pages (from-to)1-20
    Number of pages20
    JournalNuclear Technology
    Volume185
    Issue number1
    DOIs
    StatePublished - Jan 1 2014

    All Science Journal Classification (ASJC) codes

    • Nuclear and High Energy Physics
    • Nuclear Energy and Engineering
    • Condensed Matter Physics

    Fingerprint Dive into the research topics of 'Analysis of reactivity insertion accidents for the NIST research reactor before and after fuel conversion'. Together they form a unique fingerprint.

    Cite this