Bimorph-driven synthetic jet actuators optimized for various piezoelectric materials using a low-order model

Tianliang Yu, George A. Lesieutre, Steven F. Griffin, Daniel P. Brzozowski, Aaron M. Sassoon

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

Synthetic jet actuators are of interest for potential applications to active flow control and thermal management. Resonant piezoelectric-diaphragm-type configurations are commonly considered. Modeling of such actuators remains a challenge due to complexities associated with both electro-elastic and fluid-structure coupling, as well as potential non-linearities in both. A key metric for synthetic jet performance is the time-averaged jet momentum. Linear lumped-element modeling is an approach that has demonstrated the ability to predict jet momentum in terms of input frequency and voltage; however, it neglects nonlinearity and increasing losses at high amplitude. Full electro-elastic-fluidic finite element modeling makes the most accurate prediction but is computationally expensive for design and optimization purposes. The assumed-modes method provides an energy-based low-order model which captures electro-elastic and acoustic-structure couplings with adequate accuracy. Tri-laminar circular plates under clamped boundary conditions were modeled using the assumed-modes method. Maximization of jet momentum is considered via the maximization of surrogate device metrics: Free volume displacement, effective blocking pressure, strain energy, and device coupling coefficient. The driving frequency of the actuator is treated as a constraint in the optimization which nominally matches the fundamental acoustic natural frequency of the cylindrical cavity. Device configurations were obtained for various polycrystalline and single crystal piezoelectric materials, driven at 10% of their coercive fields in the model. The optimal configurations approximate a simply-supported circular plate with complete piezo coverage. The relative merits of individual materials were also discerned from the optimization results. The low mechanical loss factor of PZT8 enables high output at resonance, while high loss factor and low stiffness limit the utility of PVDF in this application. Due to a combination of lower loss factor and higher coupling, single crystal materials modestly outperform PZT5A.

Original languageEnglish (US)
Title of host publicationIndustrial and Commercial Applications of Smart Structures Technologies 2017
EditorsDan J. Clingman
PublisherSPIE
Volume10166
ISBN (Electronic)9781510608177
DOIs
StatePublished - Jan 1 2017
EventIndustrial and Commercial Applications of Smart Structures Technologies 2017 - Portland, United States
Duration: Mar 26 2017Mar 27 2017

Other

OtherIndustrial and Commercial Applications of Smart Structures Technologies 2017
CountryUnited States
CityPortland
Period3/26/173/27/17

Fingerprint

Piezoelectric Material
Piezoelectric materials
Actuator
Actuators
actuators
circular plates
Momentum
Circular Plate
Single Crystal
momentum
Configuration
optimization
Optimization
Acoustics
configurations
nonlinearity
Single crystals
Nonlinearity
Thermal Management
Metric

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Computer Science Applications
  • Applied Mathematics
  • Electrical and Electronic Engineering

Cite this

Yu, T., Lesieutre, G. A., Griffin, S. F., Brzozowski, D. P., & Sassoon, A. M. (2017). Bimorph-driven synthetic jet actuators optimized for various piezoelectric materials using a low-order model. In D. J. Clingman (Ed.), Industrial and Commercial Applications of Smart Structures Technologies 2017 (Vol. 10166). [101660B] SPIE. https://doi.org/10.1117/12.2263359
Yu, Tianliang ; Lesieutre, George A. ; Griffin, Steven F. ; Brzozowski, Daniel P. ; Sassoon, Aaron M. / Bimorph-driven synthetic jet actuators optimized for various piezoelectric materials using a low-order model. Industrial and Commercial Applications of Smart Structures Technologies 2017. editor / Dan J. Clingman. Vol. 10166 SPIE, 2017.
@inproceedings{2283e3a7415441478e4067a26197b49b,
title = "Bimorph-driven synthetic jet actuators optimized for various piezoelectric materials using a low-order model",
abstract = "Synthetic jet actuators are of interest for potential applications to active flow control and thermal management. Resonant piezoelectric-diaphragm-type configurations are commonly considered. Modeling of such actuators remains a challenge due to complexities associated with both electro-elastic and fluid-structure coupling, as well as potential non-linearities in both. A key metric for synthetic jet performance is the time-averaged jet momentum. Linear lumped-element modeling is an approach that has demonstrated the ability to predict jet momentum in terms of input frequency and voltage; however, it neglects nonlinearity and increasing losses at high amplitude. Full electro-elastic-fluidic finite element modeling makes the most accurate prediction but is computationally expensive for design and optimization purposes. The assumed-modes method provides an energy-based low-order model which captures electro-elastic and acoustic-structure couplings with adequate accuracy. Tri-laminar circular plates under clamped boundary conditions were modeled using the assumed-modes method. Maximization of jet momentum is considered via the maximization of surrogate device metrics: Free volume displacement, effective blocking pressure, strain energy, and device coupling coefficient. The driving frequency of the actuator is treated as a constraint in the optimization which nominally matches the fundamental acoustic natural frequency of the cylindrical cavity. Device configurations were obtained for various polycrystalline and single crystal piezoelectric materials, driven at 10{\%} of their coercive fields in the model. The optimal configurations approximate a simply-supported circular plate with complete piezo coverage. The relative merits of individual materials were also discerned from the optimization results. The low mechanical loss factor of PZT8 enables high output at resonance, while high loss factor and low stiffness limit the utility of PVDF in this application. Due to a combination of lower loss factor and higher coupling, single crystal materials modestly outperform PZT5A.",
author = "Tianliang Yu and Lesieutre, {George A.} and Griffin, {Steven F.} and Brzozowski, {Daniel P.} and Sassoon, {Aaron M.}",
year = "2017",
month = "1",
day = "1",
doi = "10.1117/12.2263359",
language = "English (US)",
volume = "10166",
editor = "Clingman, {Dan J.}",
booktitle = "Industrial and Commercial Applications of Smart Structures Technologies 2017",
publisher = "SPIE",
address = "United States",

}

Yu, T, Lesieutre, GA, Griffin, SF, Brzozowski, DP & Sassoon, AM 2017, Bimorph-driven synthetic jet actuators optimized for various piezoelectric materials using a low-order model. in DJ Clingman (ed.), Industrial and Commercial Applications of Smart Structures Technologies 2017. vol. 10166, 101660B, SPIE, Industrial and Commercial Applications of Smart Structures Technologies 2017, Portland, United States, 3/26/17. https://doi.org/10.1117/12.2263359

Bimorph-driven synthetic jet actuators optimized for various piezoelectric materials using a low-order model. / Yu, Tianliang; Lesieutre, George A.; Griffin, Steven F.; Brzozowski, Daniel P.; Sassoon, Aaron M.

Industrial and Commercial Applications of Smart Structures Technologies 2017. ed. / Dan J. Clingman. Vol. 10166 SPIE, 2017. 101660B.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - Bimorph-driven synthetic jet actuators optimized for various piezoelectric materials using a low-order model

AU - Yu, Tianliang

AU - Lesieutre, George A.

AU - Griffin, Steven F.

AU - Brzozowski, Daniel P.

AU - Sassoon, Aaron M.

PY - 2017/1/1

Y1 - 2017/1/1

N2 - Synthetic jet actuators are of interest for potential applications to active flow control and thermal management. Resonant piezoelectric-diaphragm-type configurations are commonly considered. Modeling of such actuators remains a challenge due to complexities associated with both electro-elastic and fluid-structure coupling, as well as potential non-linearities in both. A key metric for synthetic jet performance is the time-averaged jet momentum. Linear lumped-element modeling is an approach that has demonstrated the ability to predict jet momentum in terms of input frequency and voltage; however, it neglects nonlinearity and increasing losses at high amplitude. Full electro-elastic-fluidic finite element modeling makes the most accurate prediction but is computationally expensive for design and optimization purposes. The assumed-modes method provides an energy-based low-order model which captures electro-elastic and acoustic-structure couplings with adequate accuracy. Tri-laminar circular plates under clamped boundary conditions were modeled using the assumed-modes method. Maximization of jet momentum is considered via the maximization of surrogate device metrics: Free volume displacement, effective blocking pressure, strain energy, and device coupling coefficient. The driving frequency of the actuator is treated as a constraint in the optimization which nominally matches the fundamental acoustic natural frequency of the cylindrical cavity. Device configurations were obtained for various polycrystalline and single crystal piezoelectric materials, driven at 10% of their coercive fields in the model. The optimal configurations approximate a simply-supported circular plate with complete piezo coverage. The relative merits of individual materials were also discerned from the optimization results. The low mechanical loss factor of PZT8 enables high output at resonance, while high loss factor and low stiffness limit the utility of PVDF in this application. Due to a combination of lower loss factor and higher coupling, single crystal materials modestly outperform PZT5A.

AB - Synthetic jet actuators are of interest for potential applications to active flow control and thermal management. Resonant piezoelectric-diaphragm-type configurations are commonly considered. Modeling of such actuators remains a challenge due to complexities associated with both electro-elastic and fluid-structure coupling, as well as potential non-linearities in both. A key metric for synthetic jet performance is the time-averaged jet momentum. Linear lumped-element modeling is an approach that has demonstrated the ability to predict jet momentum in terms of input frequency and voltage; however, it neglects nonlinearity and increasing losses at high amplitude. Full electro-elastic-fluidic finite element modeling makes the most accurate prediction but is computationally expensive for design and optimization purposes. The assumed-modes method provides an energy-based low-order model which captures electro-elastic and acoustic-structure couplings with adequate accuracy. Tri-laminar circular plates under clamped boundary conditions were modeled using the assumed-modes method. Maximization of jet momentum is considered via the maximization of surrogate device metrics: Free volume displacement, effective blocking pressure, strain energy, and device coupling coefficient. The driving frequency of the actuator is treated as a constraint in the optimization which nominally matches the fundamental acoustic natural frequency of the cylindrical cavity. Device configurations were obtained for various polycrystalline and single crystal piezoelectric materials, driven at 10% of their coercive fields in the model. The optimal configurations approximate a simply-supported circular plate with complete piezo coverage. The relative merits of individual materials were also discerned from the optimization results. The low mechanical loss factor of PZT8 enables high output at resonance, while high loss factor and low stiffness limit the utility of PVDF in this application. Due to a combination of lower loss factor and higher coupling, single crystal materials modestly outperform PZT5A.

UR - http://www.scopus.com/inward/record.url?scp=85026675633&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85026675633&partnerID=8YFLogxK

U2 - 10.1117/12.2263359

DO - 10.1117/12.2263359

M3 - Conference contribution

AN - SCOPUS:85026675633

VL - 10166

BT - Industrial and Commercial Applications of Smart Structures Technologies 2017

A2 - Clingman, Dan J.

PB - SPIE

ER -

Yu T, Lesieutre GA, Griffin SF, Brzozowski DP, Sassoon AM. Bimorph-driven synthetic jet actuators optimized for various piezoelectric materials using a low-order model. In Clingman DJ, editor, Industrial and Commercial Applications of Smart Structures Technologies 2017. Vol. 10166. SPIE. 2017. 101660B https://doi.org/10.1117/12.2263359