Building IoT-enabled wearable medical devices: An application to a wearable, multiparametric, cardiorespiratory sensor

Arthur Gatouillat, Bertrand Massot, Youakim Badr, Ervin Sejdić, Claudine Gehin

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

Recent developments in personal and mobile healthcare have shown promising results in term of patients’ quality of life and quality of care improvements. This can be achieved through continuous monitoring of patients’ physiological functions using wearable non-invasive biomedical sensors. The remote collection and processing of such data can then be used to provide rapid medical response if a problem is detected or to offer preventive measures. However, the integration of wearable sensors into wider-scale framework is still a major challenge, as real-time data collection and remote configuration capabilities must be integrated to strongly constrained devices. Here, we show how such requirements can be integrated into a multiparameter, cardiorespiratory wearable sensor and how this sensor can be integrated into wide-scale Internet-based frameworks. We thus manufactured a biomedical-grade heart rate, instantaneous heart-rate variability and respiratory sensor. The sensor was tested in real life ambulatory condition, and we showed an Internet-based proof of concept exhibiting the integration of our sensor into wide-scale healthcare frameworks. Finally, we anticipate that wearable healthcare will greatly improve patients’ quality-of-life by using IoT-based wearable devices similar to the sensor developed in this paper.

Original languageEnglish (US)
Title of host publicationBIODEVICES 2018 - 11th International Conference on Biomedical Electronics and Devices, Proceedings; Part of 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018
EditorsSergi Bermudez i Badia, Alberto Cliquet, Alberto Cliquet, Hugo Gamboa, Ana Fred
PublisherSciTePress
Pages109-118
Number of pages10
ISBN (Electronic)9789897582776
StatePublished - Jan 1 2018
Event11th International Conference on Biomedical Electronics and Devices, BIODEVICES 2018 - Part of 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018 - Funchal, Madeira, Portugal
Duration: Jan 19 2018Jan 21 2018

Publication series

NameBIODEVICES 2018 - 11th International Conference on Biomedical Electronics and Devices, Proceedings; Part of 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018
Volume1

Conference

Conference11th International Conference on Biomedical Electronics and Devices, BIODEVICES 2018 - Part of 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018
CountryPortugal
CityFunchal, Madeira
Period1/19/181/21/18

Fingerprint

Sensors
Internet
Internet of things
Monitoring
Processing
Wearable sensors

All Science Journal Classification (ASJC) codes

  • Biomedical Engineering
  • Electrical and Electronic Engineering

Cite this

Gatouillat, A., Massot, B., Badr, Y., Sejdić, E., & Gehin, C. (2018). Building IoT-enabled wearable medical devices: An application to a wearable, multiparametric, cardiorespiratory sensor. In S. Bermudez i Badia, A. Cliquet, A. Cliquet, H. Gamboa, & A. Fred (Eds.), BIODEVICES 2018 - 11th International Conference on Biomedical Electronics and Devices, Proceedings; Part of 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018 (pp. 109-118). (BIODEVICES 2018 - 11th International Conference on Biomedical Electronics and Devices, Proceedings; Part of 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018; Vol. 1). SciTePress.
Gatouillat, Arthur ; Massot, Bertrand ; Badr, Youakim ; Sejdić, Ervin ; Gehin, Claudine. / Building IoT-enabled wearable medical devices : An application to a wearable, multiparametric, cardiorespiratory sensor. BIODEVICES 2018 - 11th International Conference on Biomedical Electronics and Devices, Proceedings; Part of 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018. editor / Sergi Bermudez i Badia ; Alberto Cliquet ; Alberto Cliquet ; Hugo Gamboa ; Ana Fred. SciTePress, 2018. pp. 109-118 (BIODEVICES 2018 - 11th International Conference on Biomedical Electronics and Devices, Proceedings; Part of 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018).
@inproceedings{507a0fed56da44fc877237dd9aa5907f,
title = "Building IoT-enabled wearable medical devices: An application to a wearable, multiparametric, cardiorespiratory sensor",
abstract = "Recent developments in personal and mobile healthcare have shown promising results in term of patients’ quality of life and quality of care improvements. This can be achieved through continuous monitoring of patients’ physiological functions using wearable non-invasive biomedical sensors. The remote collection and processing of such data can then be used to provide rapid medical response if a problem is detected or to offer preventive measures. However, the integration of wearable sensors into wider-scale framework is still a major challenge, as real-time data collection and remote configuration capabilities must be integrated to strongly constrained devices. Here, we show how such requirements can be integrated into a multiparameter, cardiorespiratory wearable sensor and how this sensor can be integrated into wide-scale Internet-based frameworks. We thus manufactured a biomedical-grade heart rate, instantaneous heart-rate variability and respiratory sensor. The sensor was tested in real life ambulatory condition, and we showed an Internet-based proof of concept exhibiting the integration of our sensor into wide-scale healthcare frameworks. Finally, we anticipate that wearable healthcare will greatly improve patients’ quality-of-life by using IoT-based wearable devices similar to the sensor developed in this paper.",
author = "Arthur Gatouillat and Bertrand Massot and Youakim Badr and Ervin Sejdić and Claudine Gehin",
year = "2018",
month = "1",
day = "1",
language = "English (US)",
series = "BIODEVICES 2018 - 11th International Conference on Biomedical Electronics and Devices, Proceedings; Part of 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018",
publisher = "SciTePress",
pages = "109--118",
editor = "{Bermudez i Badia}, Sergi and Alberto Cliquet and Alberto Cliquet and Hugo Gamboa and Ana Fred",
booktitle = "BIODEVICES 2018 - 11th International Conference on Biomedical Electronics and Devices, Proceedings; Part of 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018",

}

Gatouillat, A, Massot, B, Badr, Y, Sejdić, E & Gehin, C 2018, Building IoT-enabled wearable medical devices: An application to a wearable, multiparametric, cardiorespiratory sensor. in S Bermudez i Badia, A Cliquet, A Cliquet, H Gamboa & A Fred (eds), BIODEVICES 2018 - 11th International Conference on Biomedical Electronics and Devices, Proceedings; Part of 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018. BIODEVICES 2018 - 11th International Conference on Biomedical Electronics and Devices, Proceedings; Part of 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018, vol. 1, SciTePress, pp. 109-118, 11th International Conference on Biomedical Electronics and Devices, BIODEVICES 2018 - Part of 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018, Funchal, Madeira, Portugal, 1/19/18.

Building IoT-enabled wearable medical devices : An application to a wearable, multiparametric, cardiorespiratory sensor. / Gatouillat, Arthur; Massot, Bertrand; Badr, Youakim; Sejdić, Ervin; Gehin, Claudine.

BIODEVICES 2018 - 11th International Conference on Biomedical Electronics and Devices, Proceedings; Part of 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018. ed. / Sergi Bermudez i Badia; Alberto Cliquet; Alberto Cliquet; Hugo Gamboa; Ana Fred. SciTePress, 2018. p. 109-118 (BIODEVICES 2018 - 11th International Conference on Biomedical Electronics and Devices, Proceedings; Part of 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018; Vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - Building IoT-enabled wearable medical devices

T2 - An application to a wearable, multiparametric, cardiorespiratory sensor

AU - Gatouillat, Arthur

AU - Massot, Bertrand

AU - Badr, Youakim

AU - Sejdić, Ervin

AU - Gehin, Claudine

PY - 2018/1/1

Y1 - 2018/1/1

N2 - Recent developments in personal and mobile healthcare have shown promising results in term of patients’ quality of life and quality of care improvements. This can be achieved through continuous monitoring of patients’ physiological functions using wearable non-invasive biomedical sensors. The remote collection and processing of such data can then be used to provide rapid medical response if a problem is detected or to offer preventive measures. However, the integration of wearable sensors into wider-scale framework is still a major challenge, as real-time data collection and remote configuration capabilities must be integrated to strongly constrained devices. Here, we show how such requirements can be integrated into a multiparameter, cardiorespiratory wearable sensor and how this sensor can be integrated into wide-scale Internet-based frameworks. We thus manufactured a biomedical-grade heart rate, instantaneous heart-rate variability and respiratory sensor. The sensor was tested in real life ambulatory condition, and we showed an Internet-based proof of concept exhibiting the integration of our sensor into wide-scale healthcare frameworks. Finally, we anticipate that wearable healthcare will greatly improve patients’ quality-of-life by using IoT-based wearable devices similar to the sensor developed in this paper.

AB - Recent developments in personal and mobile healthcare have shown promising results in term of patients’ quality of life and quality of care improvements. This can be achieved through continuous monitoring of patients’ physiological functions using wearable non-invasive biomedical sensors. The remote collection and processing of such data can then be used to provide rapid medical response if a problem is detected or to offer preventive measures. However, the integration of wearable sensors into wider-scale framework is still a major challenge, as real-time data collection and remote configuration capabilities must be integrated to strongly constrained devices. Here, we show how such requirements can be integrated into a multiparameter, cardiorespiratory wearable sensor and how this sensor can be integrated into wide-scale Internet-based frameworks. We thus manufactured a biomedical-grade heart rate, instantaneous heart-rate variability and respiratory sensor. The sensor was tested in real life ambulatory condition, and we showed an Internet-based proof of concept exhibiting the integration of our sensor into wide-scale healthcare frameworks. Finally, we anticipate that wearable healthcare will greatly improve patients’ quality-of-life by using IoT-based wearable devices similar to the sensor developed in this paper.

UR - http://www.scopus.com/inward/record.url?scp=85051747344&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85051747344&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:85051747344

T3 - BIODEVICES 2018 - 11th International Conference on Biomedical Electronics and Devices, Proceedings; Part of 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018

SP - 109

EP - 118

BT - BIODEVICES 2018 - 11th International Conference on Biomedical Electronics and Devices, Proceedings; Part of 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018

A2 - Bermudez i Badia, Sergi

A2 - Cliquet, Alberto

A2 - Cliquet, Alberto

A2 - Gamboa, Hugo

A2 - Fred, Ana

PB - SciTePress

ER -

Gatouillat A, Massot B, Badr Y, Sejdić E, Gehin C. Building IoT-enabled wearable medical devices: An application to a wearable, multiparametric, cardiorespiratory sensor. In Bermudez i Badia S, Cliquet A, Cliquet A, Gamboa H, Fred A, editors, BIODEVICES 2018 - 11th International Conference on Biomedical Electronics and Devices, Proceedings; Part of 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018. SciTePress. 2018. p. 109-118. (BIODEVICES 2018 - 11th International Conference on Biomedical Electronics and Devices, Proceedings; Part of 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018).