Challenges of flight control in a compound helicopter

Brian Geiger, Fred W. Piasecki, Joseph Francis Horn, Marco Lotterio, Paul Schifferle

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Abstract

Piasecki Aircraft Corporation is flight demonstrating the X-49A compound helicopter to research the advantages of compound rotorcraft technology. Based on a modified SH-60F, the redundant control surfaces and lift and thrust devices of the X-49A provide increased performance, reduced vibration and fatigue loads, and the opportunity to expand the gross weight/speed envelope beyond that which conventional helicopters generally achieve. In terms of performance, the wing and 8-ft diameter Vectored Thrust Ducted Propeller (VTDP) offload the rotor in forward flight to achieve higher speeds or reduced power at the same speed as a conventional helicopter. Redundant control effectors (flaperons, elevator, propeller pitch) enable the aircraft to be trimmed for maximum performance, enhanced maneuvering, or minimum vibration and fatigue loads. This paper presents a summary of the first flight test phase, including data on load redistribution due to compounding. The simulation used for performance prediction and piloted tests is discussed. Initial results of an effort to integrate redundant flight controls with the intrinsic aeromechanical characteristics of the X-49A to allow the full benefits of compounding to be explored are also presented. The existing mechanical control system is augmented with a programmable flight control system to enable redundant control to be flexibly allocated and overcome inherent limitations of the mechanical controls. The flight control challenges associated with the complex aerodynamic interactions and mixing of redundant controls are discussed.

Original languageEnglish (US)
Title of host publicationInternational Powered Lift Conference 2010
Pages101-113
Number of pages13
StatePublished - Dec 1 2010
EventInternational Powered Lift Conference 2010 - Philadelphia, PA, United States
Duration: Oct 5 2010Oct 7 2010

Publication series

NameInternational Powered Lift Conference 2010

Other

OtherInternational Powered Lift Conference 2010
CountryUnited States
CityPhiladelphia, PA
Period10/5/1010/7/10

Fingerprint

Compound helicopters
Propellers
Helicopters
Aircraft
Fatigue of materials
Flight control systems
Elevators
Control surfaces
Aerodynamics
Rotors
Control systems

All Science Journal Classification (ASJC) codes

  • Aerospace Engineering
  • Control and Systems Engineering

Cite this

Geiger, B., Piasecki, F. W., Horn, J. F., Lotterio, M., & Schifferle, P. (2010). Challenges of flight control in a compound helicopter. In International Powered Lift Conference 2010 (pp. 101-113). (International Powered Lift Conference 2010).
Geiger, Brian ; Piasecki, Fred W. ; Horn, Joseph Francis ; Lotterio, Marco ; Schifferle, Paul. / Challenges of flight control in a compound helicopter. International Powered Lift Conference 2010. 2010. pp. 101-113 (International Powered Lift Conference 2010).
@inproceedings{35adf11de7434d81a3abd2c8bef32015,
title = "Challenges of flight control in a compound helicopter",
abstract = "Piasecki Aircraft Corporation is flight demonstrating the X-49A compound helicopter to research the advantages of compound rotorcraft technology. Based on a modified SH-60F, the redundant control surfaces and lift and thrust devices of the X-49A provide increased performance, reduced vibration and fatigue loads, and the opportunity to expand the gross weight/speed envelope beyond that which conventional helicopters generally achieve. In terms of performance, the wing and 8-ft diameter Vectored Thrust Ducted Propeller (VTDP) offload the rotor in forward flight to achieve higher speeds or reduced power at the same speed as a conventional helicopter. Redundant control effectors (flaperons, elevator, propeller pitch) enable the aircraft to be trimmed for maximum performance, enhanced maneuvering, or minimum vibration and fatigue loads. This paper presents a summary of the first flight test phase, including data on load redistribution due to compounding. The simulation used for performance prediction and piloted tests is discussed. Initial results of an effort to integrate redundant flight controls with the intrinsic aeromechanical characteristics of the X-49A to allow the full benefits of compounding to be explored are also presented. The existing mechanical control system is augmented with a programmable flight control system to enable redundant control to be flexibly allocated and overcome inherent limitations of the mechanical controls. The flight control challenges associated with the complex aerodynamic interactions and mixing of redundant controls are discussed.",
author = "Brian Geiger and Piasecki, {Fred W.} and Horn, {Joseph Francis} and Marco Lotterio and Paul Schifferle",
year = "2010",
month = "12",
day = "1",
language = "English (US)",
isbn = "9781617820311",
series = "International Powered Lift Conference 2010",
pages = "101--113",
booktitle = "International Powered Lift Conference 2010",

}

Geiger, B, Piasecki, FW, Horn, JF, Lotterio, M & Schifferle, P 2010, Challenges of flight control in a compound helicopter. in International Powered Lift Conference 2010. International Powered Lift Conference 2010, pp. 101-113, International Powered Lift Conference 2010, Philadelphia, PA, United States, 10/5/10.

Challenges of flight control in a compound helicopter. / Geiger, Brian; Piasecki, Fred W.; Horn, Joseph Francis; Lotterio, Marco; Schifferle, Paul.

International Powered Lift Conference 2010. 2010. p. 101-113 (International Powered Lift Conference 2010).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - Challenges of flight control in a compound helicopter

AU - Geiger, Brian

AU - Piasecki, Fred W.

AU - Horn, Joseph Francis

AU - Lotterio, Marco

AU - Schifferle, Paul

PY - 2010/12/1

Y1 - 2010/12/1

N2 - Piasecki Aircraft Corporation is flight demonstrating the X-49A compound helicopter to research the advantages of compound rotorcraft technology. Based on a modified SH-60F, the redundant control surfaces and lift and thrust devices of the X-49A provide increased performance, reduced vibration and fatigue loads, and the opportunity to expand the gross weight/speed envelope beyond that which conventional helicopters generally achieve. In terms of performance, the wing and 8-ft diameter Vectored Thrust Ducted Propeller (VTDP) offload the rotor in forward flight to achieve higher speeds or reduced power at the same speed as a conventional helicopter. Redundant control effectors (flaperons, elevator, propeller pitch) enable the aircraft to be trimmed for maximum performance, enhanced maneuvering, or minimum vibration and fatigue loads. This paper presents a summary of the first flight test phase, including data on load redistribution due to compounding. The simulation used for performance prediction and piloted tests is discussed. Initial results of an effort to integrate redundant flight controls with the intrinsic aeromechanical characteristics of the X-49A to allow the full benefits of compounding to be explored are also presented. The existing mechanical control system is augmented with a programmable flight control system to enable redundant control to be flexibly allocated and overcome inherent limitations of the mechanical controls. The flight control challenges associated with the complex aerodynamic interactions and mixing of redundant controls are discussed.

AB - Piasecki Aircraft Corporation is flight demonstrating the X-49A compound helicopter to research the advantages of compound rotorcraft technology. Based on a modified SH-60F, the redundant control surfaces and lift and thrust devices of the X-49A provide increased performance, reduced vibration and fatigue loads, and the opportunity to expand the gross weight/speed envelope beyond that which conventional helicopters generally achieve. In terms of performance, the wing and 8-ft diameter Vectored Thrust Ducted Propeller (VTDP) offload the rotor in forward flight to achieve higher speeds or reduced power at the same speed as a conventional helicopter. Redundant control effectors (flaperons, elevator, propeller pitch) enable the aircraft to be trimmed for maximum performance, enhanced maneuvering, or minimum vibration and fatigue loads. This paper presents a summary of the first flight test phase, including data on load redistribution due to compounding. The simulation used for performance prediction and piloted tests is discussed. Initial results of an effort to integrate redundant flight controls with the intrinsic aeromechanical characteristics of the X-49A to allow the full benefits of compounding to be explored are also presented. The existing mechanical control system is augmented with a programmable flight control system to enable redundant control to be flexibly allocated and overcome inherent limitations of the mechanical controls. The flight control challenges associated with the complex aerodynamic interactions and mixing of redundant controls are discussed.

UR - http://www.scopus.com/inward/record.url?scp=79952794463&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=79952794463&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:79952794463

SN - 9781617820311

T3 - International Powered Lift Conference 2010

SP - 101

EP - 113

BT - International Powered Lift Conference 2010

ER -

Geiger B, Piasecki FW, Horn JF, Lotterio M, Schifferle P. Challenges of flight control in a compound helicopter. In International Powered Lift Conference 2010. 2010. p. 101-113. (International Powered Lift Conference 2010).