Characterization of nano particles released during asphalt and concrete laboratory activities

Somayeh Asadi, Marwa M. Hassan, Heather Dylla

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

Although nanomaterials possess new properties and their industrial application generates promising opportunities in construction, they also present new risks and uncertainties. To quantify the level of risks associated with engineered nanomaterials, research needs to first quantify the level of nanoparticles exposure encountered in different construction activities. Therefore, the objective of this study is to evaluate the potential inhalation exposure risk associated with Hot-Mix Asphalt (HMA) and Portland Cement Concrete (PCC) preparation activities in the laboratory. To achieve this objective, the number concentration, size distribution, surface area, and mass concentrationwere measured for different activities including dry mixing, wet mixing, pouring, and compaction in an asphalt and concrete laboratory using a Scanning Mobility Particle Sizer (SMPS). Results showed that more than 70% of the particles in the concrete preparation activities were ultrafine particles. In addition, workers in the concrete laboratory were exposed to relatively higher ultrafine particles concentrations than workers in the asphalt laboratory. The majority of the total particle number (49%) released during concrete laboratory activities was in the lowest size category, between 10-30 nm in diameter.Based on the results of this study, further research is needed to understand the negative effects of nanoparticles on the health of workers.

Original languageEnglish (US)
Pages (from-to)211-217
Number of pages7
JournalInternational Journal of Pavement Research and Technology
Volume7
Issue number3
DOIs
StatePublished - 2014

Fingerprint

Asphalt
Concretes
Nanostructured materials
Nanoparticles
Portland cement
Industrial applications
Compaction
Health
Scanning

All Science Journal Classification (ASJC) codes

  • Civil and Structural Engineering
  • Mechanics of Materials

Cite this

@article{94e03b33b85c4b199d4b3f77b27cf864,
title = "Characterization of nano particles released during asphalt and concrete laboratory activities",
abstract = "Although nanomaterials possess new properties and their industrial application generates promising opportunities in construction, they also present new risks and uncertainties. To quantify the level of risks associated with engineered nanomaterials, research needs to first quantify the level of nanoparticles exposure encountered in different construction activities. Therefore, the objective of this study is to evaluate the potential inhalation exposure risk associated with Hot-Mix Asphalt (HMA) and Portland Cement Concrete (PCC) preparation activities in the laboratory. To achieve this objective, the number concentration, size distribution, surface area, and mass concentrationwere measured for different activities including dry mixing, wet mixing, pouring, and compaction in an asphalt and concrete laboratory using a Scanning Mobility Particle Sizer (SMPS). Results showed that more than 70{\%} of the particles in the concrete preparation activities were ultrafine particles. In addition, workers in the concrete laboratory were exposed to relatively higher ultrafine particles concentrations than workers in the asphalt laboratory. The majority of the total particle number (49{\%}) released during concrete laboratory activities was in the lowest size category, between 10-30 nm in diameter.Based on the results of this study, further research is needed to understand the negative effects of nanoparticles on the health of workers.",
author = "Somayeh Asadi and Hassan, {Marwa M.} and Heather Dylla",
year = "2014",
doi = "10.6135/ijprt.org.tw/2014.7(3).211",
language = "English (US)",
volume = "7",
pages = "211--217",
journal = "International Journal of Pavement Research and Technology",
issn = "1996-6814",
publisher = "Chinese Society of Pavement Engineering",
number = "3",

}

Characterization of nano particles released during asphalt and concrete laboratory activities. / Asadi, Somayeh; Hassan, Marwa M.; Dylla, Heather.

In: International Journal of Pavement Research and Technology, Vol. 7, No. 3, 2014, p. 211-217.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Characterization of nano particles released during asphalt and concrete laboratory activities

AU - Asadi, Somayeh

AU - Hassan, Marwa M.

AU - Dylla, Heather

PY - 2014

Y1 - 2014

N2 - Although nanomaterials possess new properties and their industrial application generates promising opportunities in construction, they also present new risks and uncertainties. To quantify the level of risks associated with engineered nanomaterials, research needs to first quantify the level of nanoparticles exposure encountered in different construction activities. Therefore, the objective of this study is to evaluate the potential inhalation exposure risk associated with Hot-Mix Asphalt (HMA) and Portland Cement Concrete (PCC) preparation activities in the laboratory. To achieve this objective, the number concentration, size distribution, surface area, and mass concentrationwere measured for different activities including dry mixing, wet mixing, pouring, and compaction in an asphalt and concrete laboratory using a Scanning Mobility Particle Sizer (SMPS). Results showed that more than 70% of the particles in the concrete preparation activities were ultrafine particles. In addition, workers in the concrete laboratory were exposed to relatively higher ultrafine particles concentrations than workers in the asphalt laboratory. The majority of the total particle number (49%) released during concrete laboratory activities was in the lowest size category, between 10-30 nm in diameter.Based on the results of this study, further research is needed to understand the negative effects of nanoparticles on the health of workers.

AB - Although nanomaterials possess new properties and their industrial application generates promising opportunities in construction, they also present new risks and uncertainties. To quantify the level of risks associated with engineered nanomaterials, research needs to first quantify the level of nanoparticles exposure encountered in different construction activities. Therefore, the objective of this study is to evaluate the potential inhalation exposure risk associated with Hot-Mix Asphalt (HMA) and Portland Cement Concrete (PCC) preparation activities in the laboratory. To achieve this objective, the number concentration, size distribution, surface area, and mass concentrationwere measured for different activities including dry mixing, wet mixing, pouring, and compaction in an asphalt and concrete laboratory using a Scanning Mobility Particle Sizer (SMPS). Results showed that more than 70% of the particles in the concrete preparation activities were ultrafine particles. In addition, workers in the concrete laboratory were exposed to relatively higher ultrafine particles concentrations than workers in the asphalt laboratory. The majority of the total particle number (49%) released during concrete laboratory activities was in the lowest size category, between 10-30 nm in diameter.Based on the results of this study, further research is needed to understand the negative effects of nanoparticles on the health of workers.

UR - http://www.scopus.com/inward/record.url?scp=84901419806&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84901419806&partnerID=8YFLogxK

U2 - 10.6135/ijprt.org.tw/2014.7(3).211

DO - 10.6135/ijprt.org.tw/2014.7(3).211

M3 - Article

VL - 7

SP - 211

EP - 217

JO - International Journal of Pavement Research and Technology

JF - International Journal of Pavement Research and Technology

SN - 1996-6814

IS - 3

ER -