Characterizing Ultra-Thin Matching Layers of High-Frequency Ultrasonic Transducer Based on Impedance Matching Principle

Research output: Contribution to journalArticle

13 Scopus citations

Abstract

The quarter-wavelength (λ/4) acoustic matching layer is a vital component in medical ultrasonic transducers, which can compensate for the large acoustic impedance mismatch between the piezoelectric material and the human body. At high frequencies (∼100 MHz), the λ/4 matching layers become extremely thin, and the characterization of their properties becomes very challenging. We report a method to measure the phase velocity and attenuation of ultra-thin layers using the λ/4 matching principle, in which the acoustic impedance of the thin layer is between the substrate and water. The method has been successfully used to characterize epoxy films on glass substrate. The experimental results show good agreement in the phase-velocity measurement between our proposed method and the conventional ultrasonic spectroscopy method, but the attenuation measurement is sensitive to the properties of the substrate and water medium as well as the alignment of the sample.

Original languageEnglish (US)
Pages (from-to)211-215
Number of pages5
JournalIEEE transactions on ultrasonics, ferroelectrics, and frequency control
Volume51
Issue number2
DOIs
Publication statusPublished - Feb 1 2004

All Science Journal Classification (ASJC) codes

  • Instrumentation
  • Acoustics and Ultrasonics
  • Electrical and Electronic Engineering

Cite this