Cold welding of organic light emitting diode: Interfacial and contact models

J. Asare, S. A. Adeniji, O. K. Oyewole, B. Agyei-Tuffour, J. Du, E. Arthur, A. A. Fashina, M. G. Zebaze Kana, W. O. Soboyejo

Research output: Contribution to journalArticle

3 Scopus citations

Abstract

This paper presents the results of an analytical and computational study of the contacts and interfacial fracture associated with the cold welding of Organic Light Emitting diodes (OLEDs). The effects of impurities (within the possible interfaces) are explored for contacts and interfacial fracture between layers that are relevant to model OLEDs. The models are used to study the effects of adhesion, pressure, thin film layer thickness and dust particle modulus (between the contacting surfaces) on contact profiles around impurities between cold-welded thin films. The lift-off stage of thin films (during cold welding) is then modeled as an interfacial fracture process. A combination of adhesion and interfacial fracture theories is used to provide new insights for the design of improved contact and interfacial separation during cold welding. The implications of the results are discussed for the design and fabrication of cold welded OLED structures.

Original languageEnglish (US)
Article number065125
JournalAIP Advances
Volume6
Issue number6
DOIs
StatePublished - Jun 1 2016

    Fingerprint

All Science Journal Classification (ASJC) codes

  • Physics and Astronomy(all)

Cite this

Asare, J., Adeniji, S. A., Oyewole, O. K., Agyei-Tuffour, B., Du, J., Arthur, E., Fashina, A. A., Zebaze Kana, M. G., & Soboyejo, W. O. (2016). Cold welding of organic light emitting diode: Interfacial and contact models. AIP Advances, 6(6), [065125]. https://doi.org/10.1063/1.4955141