Combustion of bimodal aluminum particles and ice mixtures

Terrence L. Connell, Grant A. Risha, Richard A. Yetter, Vigor Yang, Steven F. Son

Research output: Contribution to journalArticle

11 Citations (Scopus)

Abstract

The combustion of aluminum with ice is studied using various mixtures of nano- and micrometersized aluminum particles as a means to generate high-temperature hydrogen at fast rates for propulsion and power applications. Bimodal distributions are of interest in order to vary mixture packing densities and nascent alumina concentrations in the initial reactant mixture. In addition, the burning rate can be tailored by introducing various particle sizes. The effects of the bimodal distributions and equivalence ratio on ignition, combustion rates, and combustion efficiency are investigated in strand experiments at constant pressure and in small lab-scale [1.91 cm (0.75 in.) diameter] static firedrocket-motor combustion chambers with center-perforated propellant grains. The aluminum particles consisted of nanometer-sized particles with a nominal diameter of 80 nm and micron-sized particles with nominal diameters of 2 and 5 μm. The micron particle addition ranged from 0% to 80% by active mass in the mixture. Burning rates from 1.1 (160 psia) to 14.2 MPa (2060 psia) were determined. From the small scale motor experiments, thrust, C*, Isp, and C* and Isp efficiencies are provided. From these results, mechanistic issues of the combustion process are discussed. In particular, overall lean equivalence ratios that produce flame temperatures near the melting point of alumina resulted in considerably lower experimental C* and Isp efficiencies than equivalence ratios closer to stoichiometric. The infstitution of micron aluminum for nanometer aluminum had little effect on the linear burning rates of Al/ice mixtures for low-mass infstitutions. However, as the mass addition of micron aluminum increased (e.g., beyond 40% 2-μm aluminum in place of 80-nm aluminum), the burning rates decreased. The effects of bimodal aluminum compositions on motor performance were minor, although the experimental results suggest longer combustion times are necessary for complete combustion.

Original languageEnglish (US)
Pages (from-to)259-273
Number of pages15
JournalInternational Journal of Energetic Materials and Chemical Propulsion
Volume11
Issue number3
DOIs
StatePublished - Dec 1 2012

Fingerprint

Ice
Aluminum
Aluminum Oxide
Alumina
Propellants
Combustion chambers
Propulsion
Melting point
Ignition
Hydrogen
Experiments
Particle size
Temperature

All Science Journal Classification (ASJC) codes

  • Materials Science(all)

Cite this

@article{a2a91c036ccb42aea2d6e80dd7007dd0,
title = "Combustion of bimodal aluminum particles and ice mixtures",
abstract = "The combustion of aluminum with ice is studied using various mixtures of nano- and micrometersized aluminum particles as a means to generate high-temperature hydrogen at fast rates for propulsion and power applications. Bimodal distributions are of interest in order to vary mixture packing densities and nascent alumina concentrations in the initial reactant mixture. In addition, the burning rate can be tailored by introducing various particle sizes. The effects of the bimodal distributions and equivalence ratio on ignition, combustion rates, and combustion efficiency are investigated in strand experiments at constant pressure and in small lab-scale [1.91 cm (0.75 in.) diameter] static firedrocket-motor combustion chambers with center-perforated propellant grains. The aluminum particles consisted of nanometer-sized particles with a nominal diameter of 80 nm and micron-sized particles with nominal diameters of 2 and 5 μm. The micron particle addition ranged from 0{\%} to 80{\%} by active mass in the mixture. Burning rates from 1.1 (160 psia) to 14.2 MPa (2060 psia) were determined. From the small scale motor experiments, thrust, C*, Isp, and C* and Isp efficiencies are provided. From these results, mechanistic issues of the combustion process are discussed. In particular, overall lean equivalence ratios that produce flame temperatures near the melting point of alumina resulted in considerably lower experimental C* and Isp efficiencies than equivalence ratios closer to stoichiometric. The infstitution of micron aluminum for nanometer aluminum had little effect on the linear burning rates of Al/ice mixtures for low-mass infstitutions. However, as the mass addition of micron aluminum increased (e.g., beyond 40{\%} 2-μm aluminum in place of 80-nm aluminum), the burning rates decreased. The effects of bimodal aluminum compositions on motor performance were minor, although the experimental results suggest longer combustion times are necessary for complete combustion.",
author = "Connell, {Terrence L.} and Risha, {Grant A.} and Yetter, {Richard A.} and Vigor Yang and Son, {Steven F.}",
year = "2012",
month = "12",
day = "1",
doi = "10.1615/IntJEnergeticMaterialsChemProp.2013003588",
language = "English (US)",
volume = "11",
pages = "259--273",
journal = "International Journal of Energetic Materials and Chemical Propulsion",
issn = "2150-766X",
publisher = "Begell House Inc.",
number = "3",

}

Combustion of bimodal aluminum particles and ice mixtures. / Connell, Terrence L.; Risha, Grant A.; Yetter, Richard A.; Yang, Vigor; Son, Steven F.

In: International Journal of Energetic Materials and Chemical Propulsion, Vol. 11, No. 3, 01.12.2012, p. 259-273.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Combustion of bimodal aluminum particles and ice mixtures

AU - Connell, Terrence L.

AU - Risha, Grant A.

AU - Yetter, Richard A.

AU - Yang, Vigor

AU - Son, Steven F.

PY - 2012/12/1

Y1 - 2012/12/1

N2 - The combustion of aluminum with ice is studied using various mixtures of nano- and micrometersized aluminum particles as a means to generate high-temperature hydrogen at fast rates for propulsion and power applications. Bimodal distributions are of interest in order to vary mixture packing densities and nascent alumina concentrations in the initial reactant mixture. In addition, the burning rate can be tailored by introducing various particle sizes. The effects of the bimodal distributions and equivalence ratio on ignition, combustion rates, and combustion efficiency are investigated in strand experiments at constant pressure and in small lab-scale [1.91 cm (0.75 in.) diameter] static firedrocket-motor combustion chambers with center-perforated propellant grains. The aluminum particles consisted of nanometer-sized particles with a nominal diameter of 80 nm and micron-sized particles with nominal diameters of 2 and 5 μm. The micron particle addition ranged from 0% to 80% by active mass in the mixture. Burning rates from 1.1 (160 psia) to 14.2 MPa (2060 psia) were determined. From the small scale motor experiments, thrust, C*, Isp, and C* and Isp efficiencies are provided. From these results, mechanistic issues of the combustion process are discussed. In particular, overall lean equivalence ratios that produce flame temperatures near the melting point of alumina resulted in considerably lower experimental C* and Isp efficiencies than equivalence ratios closer to stoichiometric. The infstitution of micron aluminum for nanometer aluminum had little effect on the linear burning rates of Al/ice mixtures for low-mass infstitutions. However, as the mass addition of micron aluminum increased (e.g., beyond 40% 2-μm aluminum in place of 80-nm aluminum), the burning rates decreased. The effects of bimodal aluminum compositions on motor performance were minor, although the experimental results suggest longer combustion times are necessary for complete combustion.

AB - The combustion of aluminum with ice is studied using various mixtures of nano- and micrometersized aluminum particles as a means to generate high-temperature hydrogen at fast rates for propulsion and power applications. Bimodal distributions are of interest in order to vary mixture packing densities and nascent alumina concentrations in the initial reactant mixture. In addition, the burning rate can be tailored by introducing various particle sizes. The effects of the bimodal distributions and equivalence ratio on ignition, combustion rates, and combustion efficiency are investigated in strand experiments at constant pressure and in small lab-scale [1.91 cm (0.75 in.) diameter] static firedrocket-motor combustion chambers with center-perforated propellant grains. The aluminum particles consisted of nanometer-sized particles with a nominal diameter of 80 nm and micron-sized particles with nominal diameters of 2 and 5 μm. The micron particle addition ranged from 0% to 80% by active mass in the mixture. Burning rates from 1.1 (160 psia) to 14.2 MPa (2060 psia) were determined. From the small scale motor experiments, thrust, C*, Isp, and C* and Isp efficiencies are provided. From these results, mechanistic issues of the combustion process are discussed. In particular, overall lean equivalence ratios that produce flame temperatures near the melting point of alumina resulted in considerably lower experimental C* and Isp efficiencies than equivalence ratios closer to stoichiometric. The infstitution of micron aluminum for nanometer aluminum had little effect on the linear burning rates of Al/ice mixtures for low-mass infstitutions. However, as the mass addition of micron aluminum increased (e.g., beyond 40% 2-μm aluminum in place of 80-nm aluminum), the burning rates decreased. The effects of bimodal aluminum compositions on motor performance were minor, although the experimental results suggest longer combustion times are necessary for complete combustion.

UR - http://www.scopus.com/inward/record.url?scp=84874772896&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84874772896&partnerID=8YFLogxK

U2 - 10.1615/IntJEnergeticMaterialsChemProp.2013003588

DO - 10.1615/IntJEnergeticMaterialsChemProp.2013003588

M3 - Article

AN - SCOPUS:84874772896

VL - 11

SP - 259

EP - 273

JO - International Journal of Energetic Materials and Chemical Propulsion

JF - International Journal of Energetic Materials and Chemical Propulsion

SN - 2150-766X

IS - 3

ER -