Comparison of a new, green foundry binder with conventional foundry binders

John T. Fox, Fred S. Cannon, Nicole R. Brown, He Huang, James C. Furness

Research output: Contribution to journalArticlepeer-review

32 Scopus citations

Abstract

Metalcasting within the United States aims to meet ever-more stringent environmental standards as new process technologies are developed. Conventional foundry core binders are responsible for up to 70% of a foundrys volatile organic compound (VOC) emissions. New core binder technologies are essential for environmental sustainability within foundries. Herein, conventional and novel foundry core binders were appraised using thermal gravimetric analysis (TGA), dynamic mechanical analysis (DMA), hot distortion testing (HDT), and (Pilot-scale) molten iron erosion tests. Inherently, these tests cannot replace full-scale casting trials to evaluate binder effectiveness, however, these tests were performed to more fully elucidate binder properties that might cause casting defects or other unwanted behaviors at high temperatures. During each of these lab protocols, the combination of collagen plus alkali silicate as binders exhibited properties that matched or exceeded those of conventional phenolic urethane. Also, in iron erosion testing, the collagen/alkali silicate binder exhibited the same low erosion as conventional phenolic urethane. In hot distortion testing, the collagenalkali silicate binder exhibited longer resistance to thermal bending, and comparable thermal flexibility to conventional phenolic urethane.

Original languageEnglish (US)
Pages (from-to)38-45
Number of pages8
JournalInternational Journal of Adhesion and Adhesives
Volume34
DOIs
StatePublished - Apr 2012

All Science Journal Classification (ASJC) codes

  • Biomaterials
  • Chemical Engineering(all)
  • Polymers and Plastics

Fingerprint Dive into the research topics of 'Comparison of a new, green foundry binder with conventional foundry binders'. Together they form a unique fingerprint.

Cite this