Condensing structural finite element meshes into coarser acoustic element meshes

Research output: Chapter in Book/Report/Conference proceedingOther chapter contribution

1 Citation (Scopus)

Abstract

The sound power radiated by a vibrating structure (with negligible fluid loading) is typically computed in two steps. First, a finite element mesh of the structure is constructed, and the structural vibrations are computed. The finite element mesh is then converted to a surface mesh, and the sound power output is computed using the boundary element method. In many cases, the acoustic analysis is computationally inefficient because the structural finite element mesh is much denser than required for the acoustic calculations, leading to the solution of a large, fully populated, matrix equation. It is shown that the efficiency of the acoustic analysis can be significantly increased by condensing the structural finite element mesh into a much coarser acoustic element mesh, where the surface meshes of several structural elements are combined to form a single acoustic element. This condensation becomes possible when the boundary condition for the acoustic analysis is written in terms of elemental volume velocities instead of nodal velocities. An example is given in which sample computation times are tabulated, and the accuracy of the numerical calculations are assessed.

Original languageEnglish (US)
Title of host publication15th Biennial Conference on Mechanical Vibration and Noise
EditorsK.W. Wang, B. Yang, J.Q. Sun, K. Seto, K. Yoshida, al et al
Volume84
Edition3 Pt B/1
StatePublished - 1995
EventProceedings of the 1995 ASME Design Engineering Technical Conference. Part C - Boston, MA, USA
Duration: Sep 17 1995Sep 20 1995

Other

OtherProceedings of the 1995 ASME Design Engineering Technical Conference. Part C
CityBoston, MA, USA
Period9/17/959/20/95

Fingerprint

Acoustics
Acoustic waves
Boundary element method
Condensation
Boundary conditions
Fluids

All Science Journal Classification (ASJC) codes

  • Engineering(all)

Cite this

Fahnline, J. B. (1995). Condensing structural finite element meshes into coarser acoustic element meshes. In K. W. Wang, B. Yang, J. Q. Sun, K. Seto, K. Yoshida, & A. et al (Eds.), 15th Biennial Conference on Mechanical Vibration and Noise (3 Pt B/1 ed., Vol. 84)
Fahnline, John Brian. / Condensing structural finite element meshes into coarser acoustic element meshes. 15th Biennial Conference on Mechanical Vibration and Noise. editor / K.W. Wang ; B. Yang ; J.Q. Sun ; K. Seto ; K. Yoshida ; al et al. Vol. 84 3 Pt B/1. ed. 1995.
@inbook{4ac32a105048462caa2576a0cb55afc7,
title = "Condensing structural finite element meshes into coarser acoustic element meshes",
abstract = "The sound power radiated by a vibrating structure (with negligible fluid loading) is typically computed in two steps. First, a finite element mesh of the structure is constructed, and the structural vibrations are computed. The finite element mesh is then converted to a surface mesh, and the sound power output is computed using the boundary element method. In many cases, the acoustic analysis is computationally inefficient because the structural finite element mesh is much denser than required for the acoustic calculations, leading to the solution of a large, fully populated, matrix equation. It is shown that the efficiency of the acoustic analysis can be significantly increased by condensing the structural finite element mesh into a much coarser acoustic element mesh, where the surface meshes of several structural elements are combined to form a single acoustic element. This condensation becomes possible when the boundary condition for the acoustic analysis is written in terms of elemental volume velocities instead of nodal velocities. An example is given in which sample computation times are tabulated, and the accuracy of the numerical calculations are assessed.",
author = "Fahnline, {John Brian}",
year = "1995",
language = "English (US)",
volume = "84",
editor = "K.W. Wang and B. Yang and J.Q. Sun and K. Seto and K. Yoshida and {et al}, al",
booktitle = "15th Biennial Conference on Mechanical Vibration and Noise",
edition = "3 Pt B/1",

}

Fahnline, JB 1995, Condensing structural finite element meshes into coarser acoustic element meshes. in KW Wang, B Yang, JQ Sun, K Seto, K Yoshida & A et al (eds), 15th Biennial Conference on Mechanical Vibration and Noise. 3 Pt B/1 edn, vol. 84, Proceedings of the 1995 ASME Design Engineering Technical Conference. Part C, Boston, MA, USA, 9/17/95.

Condensing structural finite element meshes into coarser acoustic element meshes. / Fahnline, John Brian.

15th Biennial Conference on Mechanical Vibration and Noise. ed. / K.W. Wang; B. Yang; J.Q. Sun; K. Seto; K. Yoshida; al et al. Vol. 84 3 Pt B/1. ed. 1995.

Research output: Chapter in Book/Report/Conference proceedingOther chapter contribution

TY - CHAP

T1 - Condensing structural finite element meshes into coarser acoustic element meshes

AU - Fahnline, John Brian

PY - 1995

Y1 - 1995

N2 - The sound power radiated by a vibrating structure (with negligible fluid loading) is typically computed in two steps. First, a finite element mesh of the structure is constructed, and the structural vibrations are computed. The finite element mesh is then converted to a surface mesh, and the sound power output is computed using the boundary element method. In many cases, the acoustic analysis is computationally inefficient because the structural finite element mesh is much denser than required for the acoustic calculations, leading to the solution of a large, fully populated, matrix equation. It is shown that the efficiency of the acoustic analysis can be significantly increased by condensing the structural finite element mesh into a much coarser acoustic element mesh, where the surface meshes of several structural elements are combined to form a single acoustic element. This condensation becomes possible when the boundary condition for the acoustic analysis is written in terms of elemental volume velocities instead of nodal velocities. An example is given in which sample computation times are tabulated, and the accuracy of the numerical calculations are assessed.

AB - The sound power radiated by a vibrating structure (with negligible fluid loading) is typically computed in two steps. First, a finite element mesh of the structure is constructed, and the structural vibrations are computed. The finite element mesh is then converted to a surface mesh, and the sound power output is computed using the boundary element method. In many cases, the acoustic analysis is computationally inefficient because the structural finite element mesh is much denser than required for the acoustic calculations, leading to the solution of a large, fully populated, matrix equation. It is shown that the efficiency of the acoustic analysis can be significantly increased by condensing the structural finite element mesh into a much coarser acoustic element mesh, where the surface meshes of several structural elements are combined to form a single acoustic element. This condensation becomes possible when the boundary condition for the acoustic analysis is written in terms of elemental volume velocities instead of nodal velocities. An example is given in which sample computation times are tabulated, and the accuracy of the numerical calculations are assessed.

UR - http://www.scopus.com/inward/record.url?scp=0029428408&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0029428408&partnerID=8YFLogxK

M3 - Other chapter contribution

VL - 84

BT - 15th Biennial Conference on Mechanical Vibration and Noise

A2 - Wang, K.W.

A2 - Yang, B.

A2 - Sun, J.Q.

A2 - Seto, K.

A2 - Yoshida, K.

A2 - et al, al

ER -

Fahnline JB. Condensing structural finite element meshes into coarser acoustic element meshes. In Wang KW, Yang B, Sun JQ, Seto K, Yoshida K, et al A, editors, 15th Biennial Conference on Mechanical Vibration and Noise. 3 Pt B/1 ed. Vol. 84. 1995