Considering the possibility of bonding utilizing cold sintering for ceramic adhesives

Wei Ting Chen, Ahmet Erkan Gurdal, Safakcan Tuncdemir, Jing Guo, Hanzheng Guo, Clive A. Randall

Research output: Contribution to journalArticle

5 Citations (Scopus)

Abstract

Here, we introduce a new bonding technique that enables the joining of different materials at low temperatures and provides a bond superior to that of polymer adhesives at high temperatures, in temperature ranges between 250°C and 500°C. This technique involves a low temperature sintering process that is termed the “Cold Sintering Process,” where a dielectric composite powder material is sintered to function as the adhesive between two other materials being bonded. In order to characterize and further discuss the potential of this new bonding methodology, which we call Cold Sintering Ceramic Bonding (CSCB), we demonstrate the initial mechanical characteristics of samples with sandwich structures of mesh/CSCB/mesh, including four-point bending, micro-indentation, and adhesion pull tests. Where appropriate, we compare mechanical properties against low and high temperature epoxies and demonstrate that the CSCB matches up competitively with the epoxies at low temperatures and remains strong at temperatures well above those where standard polymer adhesives fail. Transmission electron microscopy show a high quality interface between a stainless steel plate and the ceramic after the CSCB.

Original languageEnglish (US)
Pages (from-to)5421-5432
Number of pages12
JournalJournal of the American Ceramic Society
Volume100
Issue number12
DOIs
StatePublished - Dec 1 2017

Fingerprint

ceramics
Adhesives
Sintering
Temperature
polymer
Polymers
indentation
Sandwich structures
adhesion
Stainless Steel
adhesive
sintering
cold
transmission electron microscopy
mechanical property
Indentation
Joining
Powders
steel
temperature

All Science Journal Classification (ASJC) codes

  • Ceramics and Composites
  • Geology
  • Geochemistry and Petrology
  • Materials Chemistry

Cite this

Chen, Wei Ting ; Gurdal, Ahmet Erkan ; Tuncdemir, Safakcan ; Guo, Jing ; Guo, Hanzheng ; Randall, Clive A. / Considering the possibility of bonding utilizing cold sintering for ceramic adhesives. In: Journal of the American Ceramic Society. 2017 ; Vol. 100, No. 12. pp. 5421-5432.
@article{c5998b8a74224656a79bbabd3cb221ca,
title = "Considering the possibility of bonding utilizing cold sintering for ceramic adhesives",
abstract = "Here, we introduce a new bonding technique that enables the joining of different materials at low temperatures and provides a bond superior to that of polymer adhesives at high temperatures, in temperature ranges between 250°C and 500°C. This technique involves a low temperature sintering process that is termed the “Cold Sintering Process,” where a dielectric composite powder material is sintered to function as the adhesive between two other materials being bonded. In order to characterize and further discuss the potential of this new bonding methodology, which we call Cold Sintering Ceramic Bonding (CSCB), we demonstrate the initial mechanical characteristics of samples with sandwich structures of mesh/CSCB/mesh, including four-point bending, micro-indentation, and adhesion pull tests. Where appropriate, we compare mechanical properties against low and high temperature epoxies and demonstrate that the CSCB matches up competitively with the epoxies at low temperatures and remains strong at temperatures well above those where standard polymer adhesives fail. Transmission electron microscopy show a high quality interface between a stainless steel plate and the ceramic after the CSCB.",
author = "Chen, {Wei Ting} and Gurdal, {Ahmet Erkan} and Safakcan Tuncdemir and Jing Guo and Hanzheng Guo and Randall, {Clive A.}",
year = "2017",
month = "12",
day = "1",
doi = "10.1111/jace.15098",
language = "English (US)",
volume = "100",
pages = "5421--5432",
journal = "Journal of the American Ceramic Society",
issn = "0002-7820",
publisher = "Wiley-Blackwell",
number = "12",

}

Considering the possibility of bonding utilizing cold sintering for ceramic adhesives. / Chen, Wei Ting; Gurdal, Ahmet Erkan; Tuncdemir, Safakcan; Guo, Jing; Guo, Hanzheng; Randall, Clive A.

In: Journal of the American Ceramic Society, Vol. 100, No. 12, 01.12.2017, p. 5421-5432.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Considering the possibility of bonding utilizing cold sintering for ceramic adhesives

AU - Chen, Wei Ting

AU - Gurdal, Ahmet Erkan

AU - Tuncdemir, Safakcan

AU - Guo, Jing

AU - Guo, Hanzheng

AU - Randall, Clive A.

PY - 2017/12/1

Y1 - 2017/12/1

N2 - Here, we introduce a new bonding technique that enables the joining of different materials at low temperatures and provides a bond superior to that of polymer adhesives at high temperatures, in temperature ranges between 250°C and 500°C. This technique involves a low temperature sintering process that is termed the “Cold Sintering Process,” where a dielectric composite powder material is sintered to function as the adhesive between two other materials being bonded. In order to characterize and further discuss the potential of this new bonding methodology, which we call Cold Sintering Ceramic Bonding (CSCB), we demonstrate the initial mechanical characteristics of samples with sandwich structures of mesh/CSCB/mesh, including four-point bending, micro-indentation, and adhesion pull tests. Where appropriate, we compare mechanical properties against low and high temperature epoxies and demonstrate that the CSCB matches up competitively with the epoxies at low temperatures and remains strong at temperatures well above those where standard polymer adhesives fail. Transmission electron microscopy show a high quality interface between a stainless steel plate and the ceramic after the CSCB.

AB - Here, we introduce a new bonding technique that enables the joining of different materials at low temperatures and provides a bond superior to that of polymer adhesives at high temperatures, in temperature ranges between 250°C and 500°C. This technique involves a low temperature sintering process that is termed the “Cold Sintering Process,” where a dielectric composite powder material is sintered to function as the adhesive between two other materials being bonded. In order to characterize and further discuss the potential of this new bonding methodology, which we call Cold Sintering Ceramic Bonding (CSCB), we demonstrate the initial mechanical characteristics of samples with sandwich structures of mesh/CSCB/mesh, including four-point bending, micro-indentation, and adhesion pull tests. Where appropriate, we compare mechanical properties against low and high temperature epoxies and demonstrate that the CSCB matches up competitively with the epoxies at low temperatures and remains strong at temperatures well above those where standard polymer adhesives fail. Transmission electron microscopy show a high quality interface between a stainless steel plate and the ceramic after the CSCB.

UR - http://www.scopus.com/inward/record.url?scp=85031085961&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85031085961&partnerID=8YFLogxK

U2 - 10.1111/jace.15098

DO - 10.1111/jace.15098

M3 - Article

VL - 100

SP - 5421

EP - 5432

JO - Journal of the American Ceramic Society

JF - Journal of the American Ceramic Society

SN - 0002-7820

IS - 12

ER -