Continuing development of a laser line forming system

Edward William Reutzel, J. U. Aburdene, K. J. Gombotz, J. P. Magnusen, Richard Martukanitz, P. Michaleris, L. Zhang

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

Thermal-mechanical processing by laser radiation has been shown effective in forming plates into relatively complex shapes at sufficient production rates. An iterative approach that incorporates sensing and contro techniques in order to converge to the desired shape may prove effective in overcoming shortcomings in predietivi models and inconsistencies in plate materials obtained during production. This presentation will discuss the continuing development of a prototype integrated system, and techniques necessary to achieve shaping of complex components by the laser assisted forming process. Integration of the robotics and laser displacement sensor into the user-friendly, modularized software platform is discussed. Path planning algorithm development is presented, witl special attention to optimization techniques based on both single-line heats, and on a strategy that uses batch lins processing with batch parameters dependent on the shape type. Preliminary experimental results will be presented.

Original languageEnglish (US)
Title of host publicationICALEO 2002 - 21st International Congress on Applications of Laser and Electro-Optics, Congress Proceedings
StatePublished - Dec 1 2002
EventICALEO 2002 - 21st International Congress on Applications of Laser and Electro-Optics - Scottsdale, AZ, United States
Duration: Oct 14 2002Oct 17 2002

Publication series

NameICALEO 2002 - 21st International Congress on Applications of Laser and Electro-Optics, Congress Proceedings

Other

OtherICALEO 2002 - 21st International Congress on Applications of Laser and Electro-Optics
CountryUnited States
CityScottsdale, AZ
Period10/14/0210/17/02

Fingerprint

laser
Lasers
Laser radiation
Motion planning
Robotics
robotics
Sensors
Processing
sensor
software
Hot Temperature
radiation
rate
material
parameter
planning

All Science Journal Classification (ASJC) codes

  • Geochemistry and Petrology
  • Electrical and Electronic Engineering

Cite this

Reutzel, E. W., Aburdene, J. U., Gombotz, K. J., Magnusen, J. P., Martukanitz, R., Michaleris, P., & Zhang, L. (2002). Continuing development of a laser line forming system. In ICALEO 2002 - 21st International Congress on Applications of Laser and Electro-Optics, Congress Proceedings (ICALEO 2002 - 21st International Congress on Applications of Laser and Electro-Optics, Congress Proceedings).
Reutzel, Edward William ; Aburdene, J. U. ; Gombotz, K. J. ; Magnusen, J. P. ; Martukanitz, Richard ; Michaleris, P. ; Zhang, L. / Continuing development of a laser line forming system. ICALEO 2002 - 21st International Congress on Applications of Laser and Electro-Optics, Congress Proceedings. 2002. (ICALEO 2002 - 21st International Congress on Applications of Laser and Electro-Optics, Congress Proceedings).
@inproceedings{bc8591d908af44c4aef3c4d776508b19,
title = "Continuing development of a laser line forming system",
abstract = "Thermal-mechanical processing by laser radiation has been shown effective in forming plates into relatively complex shapes at sufficient production rates. An iterative approach that incorporates sensing and contro techniques in order to converge to the desired shape may prove effective in overcoming shortcomings in predietivi models and inconsistencies in plate materials obtained during production. This presentation will discuss the continuing development of a prototype integrated system, and techniques necessary to achieve shaping of complex components by the laser assisted forming process. Integration of the robotics and laser displacement sensor into the user-friendly, modularized software platform is discussed. Path planning algorithm development is presented, witl special attention to optimization techniques based on both single-line heats, and on a strategy that uses batch lins processing with batch parameters dependent on the shape type. Preliminary experimental results will be presented.",
author = "Reutzel, {Edward William} and Aburdene, {J. U.} and Gombotz, {K. J.} and Magnusen, {J. P.} and Richard Martukanitz and P. Michaleris and L. Zhang",
year = "2002",
month = "12",
day = "1",
language = "English (US)",
isbn = "0912035722",
series = "ICALEO 2002 - 21st International Congress on Applications of Laser and Electro-Optics, Congress Proceedings",
booktitle = "ICALEO 2002 - 21st International Congress on Applications of Laser and Electro-Optics, Congress Proceedings",

}

Reutzel, EW, Aburdene, JU, Gombotz, KJ, Magnusen, JP, Martukanitz, R, Michaleris, P & Zhang, L 2002, Continuing development of a laser line forming system. in ICALEO 2002 - 21st International Congress on Applications of Laser and Electro-Optics, Congress Proceedings. ICALEO 2002 - 21st International Congress on Applications of Laser and Electro-Optics, Congress Proceedings, ICALEO 2002 - 21st International Congress on Applications of Laser and Electro-Optics, Scottsdale, AZ, United States, 10/14/02.

Continuing development of a laser line forming system. / Reutzel, Edward William; Aburdene, J. U.; Gombotz, K. J.; Magnusen, J. P.; Martukanitz, Richard; Michaleris, P.; Zhang, L.

ICALEO 2002 - 21st International Congress on Applications of Laser and Electro-Optics, Congress Proceedings. 2002. (ICALEO 2002 - 21st International Congress on Applications of Laser and Electro-Optics, Congress Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - Continuing development of a laser line forming system

AU - Reutzel, Edward William

AU - Aburdene, J. U.

AU - Gombotz, K. J.

AU - Magnusen, J. P.

AU - Martukanitz, Richard

AU - Michaleris, P.

AU - Zhang, L.

PY - 2002/12/1

Y1 - 2002/12/1

N2 - Thermal-mechanical processing by laser radiation has been shown effective in forming plates into relatively complex shapes at sufficient production rates. An iterative approach that incorporates sensing and contro techniques in order to converge to the desired shape may prove effective in overcoming shortcomings in predietivi models and inconsistencies in plate materials obtained during production. This presentation will discuss the continuing development of a prototype integrated system, and techniques necessary to achieve shaping of complex components by the laser assisted forming process. Integration of the robotics and laser displacement sensor into the user-friendly, modularized software platform is discussed. Path planning algorithm development is presented, witl special attention to optimization techniques based on both single-line heats, and on a strategy that uses batch lins processing with batch parameters dependent on the shape type. Preliminary experimental results will be presented.

AB - Thermal-mechanical processing by laser radiation has been shown effective in forming plates into relatively complex shapes at sufficient production rates. An iterative approach that incorporates sensing and contro techniques in order to converge to the desired shape may prove effective in overcoming shortcomings in predietivi models and inconsistencies in plate materials obtained during production. This presentation will discuss the continuing development of a prototype integrated system, and techniques necessary to achieve shaping of complex components by the laser assisted forming process. Integration of the robotics and laser displacement sensor into the user-friendly, modularized software platform is discussed. Path planning algorithm development is presented, witl special attention to optimization techniques based on both single-line heats, and on a strategy that uses batch lins processing with batch parameters dependent on the shape type. Preliminary experimental results will be presented.

UR - http://www.scopus.com/inward/record.url?scp=57049105768&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=57049105768&partnerID=8YFLogxK

M3 - Conference contribution

SN - 0912035722

SN - 9780912035727

T3 - ICALEO 2002 - 21st International Congress on Applications of Laser and Electro-Optics, Congress Proceedings

BT - ICALEO 2002 - 21st International Congress on Applications of Laser and Electro-Optics, Congress Proceedings

ER -

Reutzel EW, Aburdene JU, Gombotz KJ, Magnusen JP, Martukanitz R, Michaleris P et al. Continuing development of a laser line forming system. In ICALEO 2002 - 21st International Congress on Applications of Laser and Electro-Optics, Congress Proceedings. 2002. (ICALEO 2002 - 21st International Congress on Applications of Laser and Electro-Optics, Congress Proceedings).