Continuous toolpath planning for 3D heterogeneous porous structures

Ibrahim Tarik Ozbolat, Bahattin Koc

Research output: Contribution to conferencePaper

Abstract

Toolpath planning for porous structures is of particular interest in solid freeform fabrication (SFF) and tissue engineering. This paper presents a new multi-material based toolpath planning methodology for fabricating hollow structures. The ruled surface generated in our earlier work is used to develop toolpath planning. Ruling lines are reoriented to enable continues and uniform size multi-material printing layer-by-layer. Firstly, all ruling lines are matched and connected to eliminate start and stops during printing. Then, regions with high number of ruling lines are relaxed using a ruling line relaxation technique to eliminate over deposition. A novel layer-by-layer deposition process is progressed in two consecutive layers: The first layer ruling line based raster pattern and the next layer with spiral pattern deposition. Heterogeneous material properties are mapped based on the parametric distances from the material features. Example toolpaths are presented in this paper.

Original languageEnglish (US)
StatePublished - Jan 1 2011
Event61st Annual Conference and Expo of the Institute of Industrial Engineers - Reno, NV, United States
Duration: May 21 2011May 25 2011

Other

Other61st Annual Conference and Expo of the Institute of Industrial Engineers
CountryUnited States
CityReno, NV
Period5/21/115/25/11

All Science Journal Classification (ASJC) codes

  • Industrial and Manufacturing Engineering

Fingerprint Dive into the research topics of 'Continuous toolpath planning for 3D heterogeneous porous structures'. Together they form a unique fingerprint.

  • Cite this

    Ozbolat, I. T., & Koc, B. (2011). Continuous toolpath planning for 3D heterogeneous porous structures. Paper presented at 61st Annual Conference and Expo of the Institute of Industrial Engineers, Reno, NV, United States.