Coupled and multimode tailboom vibration control using fluidic flexible matrix composite tubes

Research output: Contribution to journalArticlepeer-review

1 Scopus citations

Abstract

This paper covers the modeling and testing of a helicopter tailboom integrated with a fluidic flexible matrix composite (F2MC) damped vibration absorber. In an advance over previous work, the F2MC absorber presented in this paper treats a combination of tailboom lateral, torsional, and vertical vibrations. A finite element structural model of a laboratory-scale tailboom is combined with a model of attached F2MC tubes and a tuned fluidic circuit. Vibration reductions of over 75% in a coupled 26.8-Hz lateral bending/torsion tailboom mode are predicted by the model and measured experimentally. These results demonstrate that F2MC vibration control is viable at higher frequencies and for more complex vibration modes than previous research had explored. A new absorber with a fluidic circuit that targets two tailboom vibration modes is designed and experimentally tested. On the lab-scale tailboom testbed, the absorber with this circuit is shown to provide vibration reductions of over 60% in both a 12.2-Hz vertical mode and a 26.8-Hz lateral bending/torsion mode. Using this new absorber, vertical and lateral/torsion mode damping are achieved with almost no added weight relative to a purely vertical absorber.

Original languageEnglish (US)
Article number042007
JournalJournal of the American Helicopter Society
Volume64
Issue number4
DOIs
StatePublished - 2019

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Aerospace Engineering
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Coupled and multimode tailboom vibration control using fluidic flexible matrix composite tubes'. Together they form a unique fingerprint.

Cite this