Design and model testing of helicopter rotor blade lag fluid elastic embedded chordwise inertial dampers

Research output: Chapter in Book/Report/Conference proceedingConference contribution

10 Scopus citations

Abstract

An embedded fluid elastic inertial damper is a small, single degree of freedom system that consists of a mass, rigidly connected to a fluid vessel, on an elastomeric spring located in the rotor blade cavity. The damper is tuned to a specific problem frequency and oscillates out-of-phase with the rotor blade resulting in an inertial moment about the lag hinge. This attenuates the lag motion of the rotor blade. The fluid elastic element gives the damper high static stiffness, which enables them to resist significant centrifugal forces, and low dynamic stiffness, which permits a low damper tuning frequency, necessary for the aeromechanical stability of the rotor system. Design guidelines for rotor blade lag damping using fluid elastic embedded chordwise inertial dampers were established. The design guidelines are intended to produce a device that is not only an effective damper but also light weight and compact. A design exercise for a full scale soft inplane rotor damper is conducted. Results of the design analysis indicate that a feasible device can generate 3% critical damping while satisfying constraints on weight, size, and stroke (static and dynamic). To validate this next generation of rotor blade lag dampers an embedded damper test facility was developed. The test facility consists of a rotor system with tubular segments in place of the airfoils. The purpose of the test stand is to simulate the centrifugal loads and rotor blade lag motions that the damper would be subjected to when installed in an actual rotor blade cavity. Design analysis indicates 3-5% critical damping will be possible, depending on the lag flexure stiffness level. A prototype fluid elastic embedded chordwise inertial damper was designed for the embedded damper test facility from existing components and will provide rotor blade lag damping to the test stand rotor system while being proportionally light weight and exhibiting small damper amplitude. Final device testing is presently underway.

Original languageEnglish (US)
Title of host publication61st Annual Forum Proceedings - AHS International
Pages890-900
Number of pages11
Volume2
StatePublished - 2005
Event61st American Helicopter Society International Annual Forum 2005 - Grapevine, TX, United States
Duration: Jun 1 2005Jun 3 2005

Other

Other61st American Helicopter Society International Annual Forum 2005
CountryUnited States
CityGrapevine, TX
Period6/1/056/3/05

All Science Journal Classification (ASJC) codes

  • Engineering(all)

Fingerprint Dive into the research topics of 'Design and model testing of helicopter rotor blade lag fluid elastic embedded chordwise inertial dampers'. Together they form a unique fingerprint.

  • Cite this

    Petrie, J. S., Lesieutre, G. A., & Smith, E. (2005). Design and model testing of helicopter rotor blade lag fluid elastic embedded chordwise inertial dampers. In 61st Annual Forum Proceedings - AHS International (Vol. 2, pp. 890-900)