Design approach accounts for condensate in gas pipelines

M. A. Adewumi, N. Nor-Azlan, Shifeng Tian

Research output: Contribution to conferencePaper

3 Citations (Scopus)

Abstract

With more than 1.2 million miles of gas pipelines criss-crossing the entire landmass of the United States, there is little doubt that the capital investment on these pipelines is tremendous. Optimal use of these pipelines is a must, both for operational reasons and cost-effectiveness. One of the prevalent problems in these pipelines is condensation. The existence of the condensate, in addition to reducing deliverability, creates several operational problems. Pigging and drips are two of the methods used to alleviate this problem. Since condensates are not uniformly distributed along the pipeline, either of these two solution strategies will be rendered ineffective unless the distribution of condensate in the pipeline is known. During the past several years, a compositional hydrodynamic model has been developed at Penn State University. This couples a phase behavior model with a fundamental multiphase hydrodynamic model. This model has since been tested and validated. Several design strategies and operational options that may be encountered in the field are defined and modelled. The results of these are reported in this paper. The results clearly demonstrate that in spite of the complex nature of this problem, condensation in pipelines can be modelled by using the approach presented here.

Original languageEnglish (US)
Pages149-158
Number of pages10
StatePublished - Dec 1 1993
EventProceedings of the 1993 SPE Eastern Regional Conference and Exhibition - Pittsburgh, PA, USA
Duration: Nov 2 1993Nov 4 1993

Other

OtherProceedings of the 1993 SPE Eastern Regional Conference and Exhibition
CityPittsburgh, PA, USA
Period11/2/9311/4/93

Fingerprint

Gas pipelines
Pipelines
Condensation
Hydrodynamics
Phase behavior
Cost effectiveness

All Science Journal Classification (ASJC) codes

  • Engineering(all)

Cite this

Adewumi, M. A., Nor-Azlan, N., & Tian, S. (1993). Design approach accounts for condensate in gas pipelines. 149-158. Paper presented at Proceedings of the 1993 SPE Eastern Regional Conference and Exhibition, Pittsburgh, PA, USA, .
Adewumi, M. A. ; Nor-Azlan, N. ; Tian, Shifeng. / Design approach accounts for condensate in gas pipelines. Paper presented at Proceedings of the 1993 SPE Eastern Regional Conference and Exhibition, Pittsburgh, PA, USA, .10 p.
@conference{290de9f8399141a280e57e95079df744,
title = "Design approach accounts for condensate in gas pipelines",
abstract = "With more than 1.2 million miles of gas pipelines criss-crossing the entire landmass of the United States, there is little doubt that the capital investment on these pipelines is tremendous. Optimal use of these pipelines is a must, both for operational reasons and cost-effectiveness. One of the prevalent problems in these pipelines is condensation. The existence of the condensate, in addition to reducing deliverability, creates several operational problems. Pigging and drips are two of the methods used to alleviate this problem. Since condensates are not uniformly distributed along the pipeline, either of these two solution strategies will be rendered ineffective unless the distribution of condensate in the pipeline is known. During the past several years, a compositional hydrodynamic model has been developed at Penn State University. This couples a phase behavior model with a fundamental multiphase hydrodynamic model. This model has since been tested and validated. Several design strategies and operational options that may be encountered in the field are defined and modelled. The results of these are reported in this paper. The results clearly demonstrate that in spite of the complex nature of this problem, condensation in pipelines can be modelled by using the approach presented here.",
author = "Adewumi, {M. A.} and N. Nor-Azlan and Shifeng Tian",
year = "1993",
month = "12",
day = "1",
language = "English (US)",
pages = "149--158",
note = "Proceedings of the 1993 SPE Eastern Regional Conference and Exhibition ; Conference date: 02-11-1993 Through 04-11-1993",

}

Adewumi, MA, Nor-Azlan, N & Tian, S 1993, 'Design approach accounts for condensate in gas pipelines', Paper presented at Proceedings of the 1993 SPE Eastern Regional Conference and Exhibition, Pittsburgh, PA, USA, 11/2/93 - 11/4/93 pp. 149-158.

Design approach accounts for condensate in gas pipelines. / Adewumi, M. A.; Nor-Azlan, N.; Tian, Shifeng.

1993. 149-158 Paper presented at Proceedings of the 1993 SPE Eastern Regional Conference and Exhibition, Pittsburgh, PA, USA, .

Research output: Contribution to conferencePaper

TY - CONF

T1 - Design approach accounts for condensate in gas pipelines

AU - Adewumi, M. A.

AU - Nor-Azlan, N.

AU - Tian, Shifeng

PY - 1993/12/1

Y1 - 1993/12/1

N2 - With more than 1.2 million miles of gas pipelines criss-crossing the entire landmass of the United States, there is little doubt that the capital investment on these pipelines is tremendous. Optimal use of these pipelines is a must, both for operational reasons and cost-effectiveness. One of the prevalent problems in these pipelines is condensation. The existence of the condensate, in addition to reducing deliverability, creates several operational problems. Pigging and drips are two of the methods used to alleviate this problem. Since condensates are not uniformly distributed along the pipeline, either of these two solution strategies will be rendered ineffective unless the distribution of condensate in the pipeline is known. During the past several years, a compositional hydrodynamic model has been developed at Penn State University. This couples a phase behavior model with a fundamental multiphase hydrodynamic model. This model has since been tested and validated. Several design strategies and operational options that may be encountered in the field are defined and modelled. The results of these are reported in this paper. The results clearly demonstrate that in spite of the complex nature of this problem, condensation in pipelines can be modelled by using the approach presented here.

AB - With more than 1.2 million miles of gas pipelines criss-crossing the entire landmass of the United States, there is little doubt that the capital investment on these pipelines is tremendous. Optimal use of these pipelines is a must, both for operational reasons and cost-effectiveness. One of the prevalent problems in these pipelines is condensation. The existence of the condensate, in addition to reducing deliverability, creates several operational problems. Pigging and drips are two of the methods used to alleviate this problem. Since condensates are not uniformly distributed along the pipeline, either of these two solution strategies will be rendered ineffective unless the distribution of condensate in the pipeline is known. During the past several years, a compositional hydrodynamic model has been developed at Penn State University. This couples a phase behavior model with a fundamental multiphase hydrodynamic model. This model has since been tested and validated. Several design strategies and operational options that may be encountered in the field are defined and modelled. The results of these are reported in this paper. The results clearly demonstrate that in spite of the complex nature of this problem, condensation in pipelines can be modelled by using the approach presented here.

UR - http://www.scopus.com/inward/record.url?scp=0027882222&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0027882222&partnerID=8YFLogxK

M3 - Paper

AN - SCOPUS:0027882222

SP - 149

EP - 158

ER -

Adewumi MA, Nor-Azlan N, Tian S. Design approach accounts for condensate in gas pipelines. 1993. Paper presented at Proceedings of the 1993 SPE Eastern Regional Conference and Exhibition, Pittsburgh, PA, USA, .