Design of translation rotary ultrasonic motor with slanted piezoelectric ceramics

Safakcan Tuncdemir, Seyit O. Ural, Burhanettin Koc, Kenji Uchino

Research output: Contribution to journalArticle

29 Scopus citations

Abstract

We designed and manufactured a multi-degree-of-freedom (MDoF) ultrasonic motor (USM) by using a single actuator. Although there have been numerous MDoF USMs reported in the literature, only a few of them cover the combined rotary and translational motions in a cylindrical-joint type configuration. Combining these two motions in one joint and controlling this combined motion through a novel USM is the main aim of this work. Here, we use smooth impact drive method (SIDM) with two distinct modes obtained at two distinct frequencies by the help of slanted ceramics and uneven square shaped excitation signals. The translational-rotary dual-mode motor can be driven by single source. The prototype of the motor (5mm diameter, 25mm total length) has 5 mm/s translational and 3 rad/s rotary speed under 4mN blocking force, when the input signal is 20 Vp-p square wave.

Original languageEnglish (US)
Article number027301
JournalJapanese Journal of Applied Physics
Volume50
Issue number2
DOIs
Publication statusPublished - Feb 1 2011

    Fingerprint

All Science Journal Classification (ASJC) codes

  • Engineering(all)
  • Physics and Astronomy(all)

Cite this