Design of user-friendly microcontroller-based controllers for general purpose drive systems

T. Jackson, H. Bae, Shiyoung Lee, R. Krishnan

Research output: Contribution to conferencePaper

Abstract

Modifying drive systems for new applications often requires a redesign of the motor controller. In areas such as industry and research, this is an unwanted cost in time and money. This paper presents a design approach for a general purpose motor controller which can be applied to various motors and drive applications. Such a design incorporates many of the practical controller considerations, as well as new problems that arise with a general purpose controller. The concept of abstraction is incorporated into the motor controller's design and results in increased ease of use for both hardware and software configurations. An application of the motor controller to an SRM drive system illustrates its flexibility and user-friendliness.

Original languageEnglish (US)
Pages1079-1084
Number of pages6
Publication statusPublished - Dec 1 1995
EventProceedings of the 1995 IEEE 21st International Conference on Industrial Electronics, Control, and Instrumentation. Part 1 (of 2) - Orlando, FL, USA
Duration: Nov 6 1995Nov 10 1995

Other

OtherProceedings of the 1995 IEEE 21st International Conference on Industrial Electronics, Control, and Instrumentation. Part 1 (of 2)
CityOrlando, FL, USA
Period11/6/9511/10/95

    Fingerprint

All Science Journal Classification (ASJC) codes

  • Control and Systems Engineering
  • Electrical and Electronic Engineering

Cite this

Jackson, T., Bae, H., Lee, S., & Krishnan, R. (1995). Design of user-friendly microcontroller-based controllers for general purpose drive systems. 1079-1084. Paper presented at Proceedings of the 1995 IEEE 21st International Conference on Industrial Electronics, Control, and Instrumentation. Part 1 (of 2), Orlando, FL, USA, .