Development of a droplet breakup model for dry spacer grid in the dispersed flow film boiling regime during reflood transients

Yue Jin, Fan-bill B. Cheung, Koroush Shirvan, Stephen M. Bajorek, Kirk Tien, Chris L. Hoxie

Research output: Contribution to journalArticle

Abstract

The liquid droplet breakup process at the leading edge of a dry spacer grid during reflood transients is studied theoretically based on the experimental observations in the present work. Various rod bundle quenching experiments were carried out at the Rod Bundle Heat Transfer (RBHT) test facility to simulate the reflood transients of a Loss of Coolant Accident (LOCA) for Light Water Reactors. In the experiment, variation of the droplet size distributions across a spacer grid are measured and analyzed. The size of droplet generated downstream of a spacer grid is found to be affected by the condition of the spacer grid as well as the quench front propagation. In addition, the substantially reduced droplet size at downstream of the spacer grid indicates that droplet breakup takes place. Based on available experimental data obtained in the Rod Bundle Heat Transfer tests and in literature, a theoretical model incorporating two droplet groups (large and small droplet groups) is developed for the dry spacer grid droplet breakup by considering the conservation of liquid mass, energy transport, and including various important flow and heat transfer parameters including the Nusselt number, Reynolds number, Jakob number, Weber number, dimensionless radiation number, distance from the initial breakup point, incoming droplet size, and spacer grid blockage ratio. Moreover, a liquid droplet mass loss coefficient was proposed for small droplet group to specially account for the liquid mass evaporation due to interfacial heat transfer and radiation. The model so developed is found to be able to predict the RBHT data within 17% error with RMSE of 0.1060 and standard deviation of 0.0990 for the validation data set, showing significantly increased accuracy. Comparison made with other experimental results indicates that the current model developed correctly captures the mass and energy transport process during breakup. In addition, sensitivity analyses are performed to investigate the overall performance and relative importance of various parameters that are related to the breakup process in the current study. The current model developed can be incorporated into nuclear reactor thermal-hydraulic and safety analysis codes to enhance their capabilities of predicting the droplet behaviors and the fuel rod peak cladding temperature in the dispersed flow film boiling regime during reflood transients of postulated accident scenarios such as LOCA for light water reactors.

Original languageEnglish (US)
Article number118544
JournalInternational Journal of Heat and Mass Transfer
Volume143
DOIs
StatePublished - Nov 1 2019

Fingerprint

film boiling
spacers
Boiling liquids
grids
rods
heat transfer
bundles
accidents
loss of coolant
light water reactors
liquids
Heat transfer
Drop breakup
Loss of coolant accidents
Light water reactors
dimensionless numbers
Liquids
nuclear reactors
test facilities
radiation

All Science Journal Classification (ASJC) codes

  • Condensed Matter Physics
  • Mechanical Engineering
  • Fluid Flow and Transfer Processes

Cite this

@article{9261169506f749eaabd0592f33dab33e,
title = "Development of a droplet breakup model for dry spacer grid in the dispersed flow film boiling regime during reflood transients",
abstract = "The liquid droplet breakup process at the leading edge of a dry spacer grid during reflood transients is studied theoretically based on the experimental observations in the present work. Various rod bundle quenching experiments were carried out at the Rod Bundle Heat Transfer (RBHT) test facility to simulate the reflood transients of a Loss of Coolant Accident (LOCA) for Light Water Reactors. In the experiment, variation of the droplet size distributions across a spacer grid are measured and analyzed. The size of droplet generated downstream of a spacer grid is found to be affected by the condition of the spacer grid as well as the quench front propagation. In addition, the substantially reduced droplet size at downstream of the spacer grid indicates that droplet breakup takes place. Based on available experimental data obtained in the Rod Bundle Heat Transfer tests and in literature, a theoretical model incorporating two droplet groups (large and small droplet groups) is developed for the dry spacer grid droplet breakup by considering the conservation of liquid mass, energy transport, and including various important flow and heat transfer parameters including the Nusselt number, Reynolds number, Jakob number, Weber number, dimensionless radiation number, distance from the initial breakup point, incoming droplet size, and spacer grid blockage ratio. Moreover, a liquid droplet mass loss coefficient was proposed for small droplet group to specially account for the liquid mass evaporation due to interfacial heat transfer and radiation. The model so developed is found to be able to predict the RBHT data within 17{\%} error with RMSE of 0.1060 and standard deviation of 0.0990 for the validation data set, showing significantly increased accuracy. Comparison made with other experimental results indicates that the current model developed correctly captures the mass and energy transport process during breakup. In addition, sensitivity analyses are performed to investigate the overall performance and relative importance of various parameters that are related to the breakup process in the current study. The current model developed can be incorporated into nuclear reactor thermal-hydraulic and safety analysis codes to enhance their capabilities of predicting the droplet behaviors and the fuel rod peak cladding temperature in the dispersed flow film boiling regime during reflood transients of postulated accident scenarios such as LOCA for light water reactors.",
author = "Yue Jin and Cheung, {Fan-bill B.} and Koroush Shirvan and Bajorek, {Stephen M.} and Kirk Tien and Hoxie, {Chris L.}",
year = "2019",
month = "11",
day = "1",
doi = "10.1016/j.ijheatmasstransfer.2019.118544",
language = "English (US)",
volume = "143",
journal = "International Journal of Heat and Mass Transfer",
issn = "0017-9310",
publisher = "Elsevier Limited",

}

Development of a droplet breakup model for dry spacer grid in the dispersed flow film boiling regime during reflood transients. / Jin, Yue; Cheung, Fan-bill B.; Shirvan, Koroush; Bajorek, Stephen M.; Tien, Kirk; Hoxie, Chris L.

In: International Journal of Heat and Mass Transfer, Vol. 143, 118544, 01.11.2019.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Development of a droplet breakup model for dry spacer grid in the dispersed flow film boiling regime during reflood transients

AU - Jin, Yue

AU - Cheung, Fan-bill B.

AU - Shirvan, Koroush

AU - Bajorek, Stephen M.

AU - Tien, Kirk

AU - Hoxie, Chris L.

PY - 2019/11/1

Y1 - 2019/11/1

N2 - The liquid droplet breakup process at the leading edge of a dry spacer grid during reflood transients is studied theoretically based on the experimental observations in the present work. Various rod bundle quenching experiments were carried out at the Rod Bundle Heat Transfer (RBHT) test facility to simulate the reflood transients of a Loss of Coolant Accident (LOCA) for Light Water Reactors. In the experiment, variation of the droplet size distributions across a spacer grid are measured and analyzed. The size of droplet generated downstream of a spacer grid is found to be affected by the condition of the spacer grid as well as the quench front propagation. In addition, the substantially reduced droplet size at downstream of the spacer grid indicates that droplet breakup takes place. Based on available experimental data obtained in the Rod Bundle Heat Transfer tests and in literature, a theoretical model incorporating two droplet groups (large and small droplet groups) is developed for the dry spacer grid droplet breakup by considering the conservation of liquid mass, energy transport, and including various important flow and heat transfer parameters including the Nusselt number, Reynolds number, Jakob number, Weber number, dimensionless radiation number, distance from the initial breakup point, incoming droplet size, and spacer grid blockage ratio. Moreover, a liquid droplet mass loss coefficient was proposed for small droplet group to specially account for the liquid mass evaporation due to interfacial heat transfer and radiation. The model so developed is found to be able to predict the RBHT data within 17% error with RMSE of 0.1060 and standard deviation of 0.0990 for the validation data set, showing significantly increased accuracy. Comparison made with other experimental results indicates that the current model developed correctly captures the mass and energy transport process during breakup. In addition, sensitivity analyses are performed to investigate the overall performance and relative importance of various parameters that are related to the breakup process in the current study. The current model developed can be incorporated into nuclear reactor thermal-hydraulic and safety analysis codes to enhance their capabilities of predicting the droplet behaviors and the fuel rod peak cladding temperature in the dispersed flow film boiling regime during reflood transients of postulated accident scenarios such as LOCA for light water reactors.

AB - The liquid droplet breakup process at the leading edge of a dry spacer grid during reflood transients is studied theoretically based on the experimental observations in the present work. Various rod bundle quenching experiments were carried out at the Rod Bundle Heat Transfer (RBHT) test facility to simulate the reflood transients of a Loss of Coolant Accident (LOCA) for Light Water Reactors. In the experiment, variation of the droplet size distributions across a spacer grid are measured and analyzed. The size of droplet generated downstream of a spacer grid is found to be affected by the condition of the spacer grid as well as the quench front propagation. In addition, the substantially reduced droplet size at downstream of the spacer grid indicates that droplet breakup takes place. Based on available experimental data obtained in the Rod Bundle Heat Transfer tests and in literature, a theoretical model incorporating two droplet groups (large and small droplet groups) is developed for the dry spacer grid droplet breakup by considering the conservation of liquid mass, energy transport, and including various important flow and heat transfer parameters including the Nusselt number, Reynolds number, Jakob number, Weber number, dimensionless radiation number, distance from the initial breakup point, incoming droplet size, and spacer grid blockage ratio. Moreover, a liquid droplet mass loss coefficient was proposed for small droplet group to specially account for the liquid mass evaporation due to interfacial heat transfer and radiation. The model so developed is found to be able to predict the RBHT data within 17% error with RMSE of 0.1060 and standard deviation of 0.0990 for the validation data set, showing significantly increased accuracy. Comparison made with other experimental results indicates that the current model developed correctly captures the mass and energy transport process during breakup. In addition, sensitivity analyses are performed to investigate the overall performance and relative importance of various parameters that are related to the breakup process in the current study. The current model developed can be incorporated into nuclear reactor thermal-hydraulic and safety analysis codes to enhance their capabilities of predicting the droplet behaviors and the fuel rod peak cladding temperature in the dispersed flow film boiling regime during reflood transients of postulated accident scenarios such as LOCA for light water reactors.

UR - http://www.scopus.com/inward/record.url?scp=85070604271&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85070604271&partnerID=8YFLogxK

U2 - 10.1016/j.ijheatmasstransfer.2019.118544

DO - 10.1016/j.ijheatmasstransfer.2019.118544

M3 - Article

AN - SCOPUS:85070604271

VL - 143

JO - International Journal of Heat and Mass Transfer

JF - International Journal of Heat and Mass Transfer

SN - 0017-9310

M1 - 118544

ER -