Development of enabling automated forming technology for Stretch Broken Carbon Fiber (SBCF) materials

Gregory P. Dillon, Donald H. Stiver

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Scopus citations

Abstract

Replacement of labor intensive hand lay-up processes with automated techniques has long been sought in the advanced composite community. The process economies demonstrated for automated forming of traditional materials urge consideration of similar approaches for fiber reinforced systems. The inherent coupling of process sequence to architecture imposed by fiber inextensibility has limited implementation, though notable advances have been made in the last two decades. Recent innovations have provided material configurations that allow fiber axis extension during processing while limiting the occurrence of deleterious thinning or fiber spreading deformation modes. Consequently a broader spectrum of component shapes has been opened up for application of automated forming techniques. This paper summarizes recent process development activity focused on providing cost effective process technology for innovative stiffened panel designs. Though the target application is rotary wing aircraft, the developed approaches have broad relevance to efficient structural design, and geometries under consideration may provide alternatives to honeycomb solutions in some structural regimes. A concurrent engineering approach to implementation is presented that illustrates how design evolution and process development activities must be iterative and interactive, while specialized material characterization must inform process parameter selection and manufacturing sequence development.

Original languageEnglish (US)
Title of host publicationSAMPE '09 Spring Symposium Conference Proceedings
Subtitle of host publicationChanging Times. New Opportunities. Are You Prepared?
Publication statusPublished - Dec 1 2009
EventSAMPE '09 Spring Symposium Conference Proceedings - Baltimore, MD, United States
Duration: May 18 2009May 21 2009

Publication series

NameInternational SAMPE Symposium and Exhibition (Proceedings)
Volume54
ISSN (Print)0891-0138

Other

OtherSAMPE '09 Spring Symposium Conference Proceedings
CountryUnited States
CityBaltimore, MD
Period5/18/095/21/09

    Fingerprint

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Dillon, G. P., & Stiver, D. H. (2009). Development of enabling automated forming technology for Stretch Broken Carbon Fiber (SBCF) materials. In SAMPE '09 Spring Symposium Conference Proceedings: Changing Times. New Opportunities. Are You Prepared? (International SAMPE Symposium and Exhibition (Proceedings); Vol. 54).