Development of Texas intense positron source

A. R. Köymen, K. Ünlü, F. M. Jacobsen, S. Göktepeli, B. W. Wehring

Research output: Contribution to journalArticle

5 Citations (Scopus)

Abstract

The Texas Intense Positron Source (TIPS) is a reactor-based low-energy positron beam facility utilizing some novel techniques in positron beam production. This facility will be located at the University of Texas (UT) at Austin Nuclear Engineering Teaching Laboratory (NETL) and is being developed by UT Austin and UT Arlington researchers. TIPS will use a large area (total area of 900-1800 cm2) 64Cu source to supply fast β+ particles for subsequent moderation to form an intense monoenergetic positron beam in the energy range of 0-50 keV with an expected intensity of 108 e+/s. Natural copper will be neutron activated near the core of the NETL 1 MW TRIGA Mark II research reactor to produce the 64Cu isotope. The activated source will be transported to the moderator/remoderator assembly, outside the biological shield of the reactor. This assembly combines the primary moderation and posterior remoderation of the fast β+ particles into one stage using solid Kr to produce a low-energy positron source of a few eV with a diameter of 8 mm. The low-energy positron beam is then extracted by an electrostatic modified SOA gun and after further acceleration to 5 keV, the beam is focused onto the object slit of a 90° bending magnet. After further focusing and another 90° bend, the beam enters the main accelerator/decelerator that transports the beam onto the target for experimentation. The components of TIPS have been manufactured and are currently being optimized. In this communication we present some of the details of the TIPS facility and furthermore briefly discuss its intended applications.

Original languageEnglish (US)
Pages (from-to)479-483
Number of pages5
JournalNuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
Volume422
Issue number1-3
DOIs
StatePublished - Dec 1 1999

Fingerprint

Positrons
positrons
Nuclear engineering
reactors
Teaching
education
assembly
engineering
brakes (for arresting motion)
Research reactors
moderators
Moderators
energy
experimentation
Service oriented architecture (SOA)
Isotopes
Particle accelerators
Magnets
slits
Electrostatics

All Science Journal Classification (ASJC) codes

  • Nuclear and High Energy Physics
  • Instrumentation

Cite this

@article{1da4ee453ab44a35b05a414841badcd2,
title = "Development of Texas intense positron source",
abstract = "The Texas Intense Positron Source (TIPS) is a reactor-based low-energy positron beam facility utilizing some novel techniques in positron beam production. This facility will be located at the University of Texas (UT) at Austin Nuclear Engineering Teaching Laboratory (NETL) and is being developed by UT Austin and UT Arlington researchers. TIPS will use a large area (total area of 900-1800 cm2) 64Cu source to supply fast β+ particles for subsequent moderation to form an intense monoenergetic positron beam in the energy range of 0-50 keV with an expected intensity of 108 e+/s. Natural copper will be neutron activated near the core of the NETL 1 MW TRIGA Mark II research reactor to produce the 64Cu isotope. The activated source will be transported to the moderator/remoderator assembly, outside the biological shield of the reactor. This assembly combines the primary moderation and posterior remoderation of the fast β+ particles into one stage using solid Kr to produce a low-energy positron source of a few eV with a diameter of 8 mm. The low-energy positron beam is then extracted by an electrostatic modified SOA gun and after further acceleration to 5 keV, the beam is focused onto the object slit of a 90° bending magnet. After further focusing and another 90° bend, the beam enters the main accelerator/decelerator that transports the beam onto the target for experimentation. The components of TIPS have been manufactured and are currently being optimized. In this communication we present some of the details of the TIPS facility and furthermore briefly discuss its intended applications.",
author = "K{\"o}ymen, {A. R.} and K. {\"U}nl{\"u} and Jacobsen, {F. M.} and S. G{\"o}ktepeli and Wehring, {B. W.}",
year = "1999",
month = "12",
day = "1",
doi = "10.1016/S0168-9002(98)01008-0",
language = "English (US)",
volume = "422",
pages = "479--483",
journal = "Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment",
issn = "0168-9002",
publisher = "Elsevier",
number = "1-3",

}

Development of Texas intense positron source. / Köymen, A. R.; Ünlü, K.; Jacobsen, F. M.; Göktepeli, S.; Wehring, B. W.

In: Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, Vol. 422, No. 1-3, 01.12.1999, p. 479-483.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Development of Texas intense positron source

AU - Köymen, A. R.

AU - Ünlü, K.

AU - Jacobsen, F. M.

AU - Göktepeli, S.

AU - Wehring, B. W.

PY - 1999/12/1

Y1 - 1999/12/1

N2 - The Texas Intense Positron Source (TIPS) is a reactor-based low-energy positron beam facility utilizing some novel techniques in positron beam production. This facility will be located at the University of Texas (UT) at Austin Nuclear Engineering Teaching Laboratory (NETL) and is being developed by UT Austin and UT Arlington researchers. TIPS will use a large area (total area of 900-1800 cm2) 64Cu source to supply fast β+ particles for subsequent moderation to form an intense monoenergetic positron beam in the energy range of 0-50 keV with an expected intensity of 108 e+/s. Natural copper will be neutron activated near the core of the NETL 1 MW TRIGA Mark II research reactor to produce the 64Cu isotope. The activated source will be transported to the moderator/remoderator assembly, outside the biological shield of the reactor. This assembly combines the primary moderation and posterior remoderation of the fast β+ particles into one stage using solid Kr to produce a low-energy positron source of a few eV with a diameter of 8 mm. The low-energy positron beam is then extracted by an electrostatic modified SOA gun and after further acceleration to 5 keV, the beam is focused onto the object slit of a 90° bending magnet. After further focusing and another 90° bend, the beam enters the main accelerator/decelerator that transports the beam onto the target for experimentation. The components of TIPS have been manufactured and are currently being optimized. In this communication we present some of the details of the TIPS facility and furthermore briefly discuss its intended applications.

AB - The Texas Intense Positron Source (TIPS) is a reactor-based low-energy positron beam facility utilizing some novel techniques in positron beam production. This facility will be located at the University of Texas (UT) at Austin Nuclear Engineering Teaching Laboratory (NETL) and is being developed by UT Austin and UT Arlington researchers. TIPS will use a large area (total area of 900-1800 cm2) 64Cu source to supply fast β+ particles for subsequent moderation to form an intense monoenergetic positron beam in the energy range of 0-50 keV with an expected intensity of 108 e+/s. Natural copper will be neutron activated near the core of the NETL 1 MW TRIGA Mark II research reactor to produce the 64Cu isotope. The activated source will be transported to the moderator/remoderator assembly, outside the biological shield of the reactor. This assembly combines the primary moderation and posterior remoderation of the fast β+ particles into one stage using solid Kr to produce a low-energy positron source of a few eV with a diameter of 8 mm. The low-energy positron beam is then extracted by an electrostatic modified SOA gun and after further acceleration to 5 keV, the beam is focused onto the object slit of a 90° bending magnet. After further focusing and another 90° bend, the beam enters the main accelerator/decelerator that transports the beam onto the target for experimentation. The components of TIPS have been manufactured and are currently being optimized. In this communication we present some of the details of the TIPS facility and furthermore briefly discuss its intended applications.

UR - http://www.scopus.com/inward/record.url?scp=0343089635&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0343089635&partnerID=8YFLogxK

U2 - 10.1016/S0168-9002(98)01008-0

DO - 10.1016/S0168-9002(98)01008-0

M3 - Article

AN - SCOPUS:0343089635

VL - 422

SP - 479

EP - 483

JO - Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment

JF - Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment

SN - 0168-9002

IS - 1-3

ER -