Dielectric elastomer laminates for active membrane pump applications

K. Pope, A. Tews, M. I. Frecker, E. Mockensturm, N. Goulbourne, A. J. Snyder

Research output: Contribution to journalConference article

14 Scopus citations

Abstract

Previous research has demonstrated promise for the use of dielectric elastomer (DE) films in diaphragm pump applications. Because the films tend to be quite thin, single layers operate at very low pressures. To make this technology suitable for practical applications, the films may be organized into laminates which will operate at increased pressures. Radially stretched circular diaphragms of two materials were tested: 3M VHB 4905 polyacrylate and spin-cast Nusil CF19-2186 silicone. The diaphragms were stacked, each layer sharing an electrode with the adjacent layer. The stack was mounted on a sealed chamber and energized at varied electric fields while regulated pressure was applied to the interior chamber, displacing the diaphragm. The pressure-volume properties of the stacks were recorded for each activation state.

Original languageEnglish (US)
Pages (from-to)60-67
Number of pages8
JournalProceedings of SPIE - The International Society for Optical Engineering
Volume5385
DOIs
StatePublished - Dec 1 2004
EventSmart Structures and Materials 2004 - Electroactive Polymer Actuators and Devices (EAPAD) - San Diego, CA, United Kingdom
Duration: Mar 15 2004Mar 18 2004

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Computer Science Applications
  • Applied Mathematics
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'Dielectric elastomer laminates for active membrane pump applications'. Together they form a unique fingerprint.

  • Cite this