Diffusive flux of nanoparticles through chemically modified alumina membranes

Jason R. Stephens, Jacob S. Beveridge, Mary Elizabeth Williams

Research output: Contribution to journalArticle

5 Citations (Scopus)

Abstract

Surface chemistry plays an important role in determining flux through porous media such as in the environment. In this paper diffusive flux of nanoparticles through alkylsilane modified porous alumina is measured as a model for understanding transport in porous media of differing surface chemistries. Experiments are performed as a function of particle size, pore diameter, attached hydrocarbon chain length and chain terminus, and solvent. Particle fluxes are monitored by the change in absorbance of the solution in the receiving side of a diffusion cell. In general, flux increases when the membranes are modified with alkylsilanes compared to untreated membranes, which is attributed to the hydrophobic nature of the porous membranes and differences in wettability. We find that flux decreases, in both hexane and aqueous solutions, when the hydrocarbon chain lining the interior pore wall increases in length. The rate and selectivity of transport across these membranes is related to the partition coefficient (Kp) and the diffusion coefficient (D) of the permeating species. By conducting experiments as a function of initial particle concentration, we find that KpD increases with increasing particle size, is greater in alkylsilane-modified pores, and larger in hexane solution than water. The impact of the alkylsilane terminus (-CH3, -Br, -NH2, -COOH) on permeation in water is also examined. In water, the highest KpD is observed when the membranes are modified with carboxylic acid terminated silanes and lowest with amine terminated silanes as a result of electrostatic effects during translocation.

Original languageEnglish (US)
Pages (from-to)3797-3802
Number of pages6
JournalAnalyst
Volume136
Issue number18
DOIs
StatePublished - Sep 21 2011

Fingerprint

Aluminum Oxide
Nanoparticles
aluminum oxide
Alumina
Fluxes
membrane
Membranes
Silanes
Hexanes
Hydrocarbons
Surface chemistry
Hexane
Particle Size
Porous materials
porous medium
Water
Particle size
particle size
hydrocarbon
Wettability

All Science Journal Classification (ASJC) codes

  • Analytical Chemistry
  • Biochemistry
  • Environmental Chemistry
  • Spectroscopy
  • Electrochemistry

Cite this

Stephens, Jason R. ; Beveridge, Jacob S. ; Williams, Mary Elizabeth. / Diffusive flux of nanoparticles through chemically modified alumina membranes. In: Analyst. 2011 ; Vol. 136, No. 18. pp. 3797-3802.
@article{42f41a4cb57d4527817bee5ff983229f,
title = "Diffusive flux of nanoparticles through chemically modified alumina membranes",
abstract = "Surface chemistry plays an important role in determining flux through porous media such as in the environment. In this paper diffusive flux of nanoparticles through alkylsilane modified porous alumina is measured as a model for understanding transport in porous media of differing surface chemistries. Experiments are performed as a function of particle size, pore diameter, attached hydrocarbon chain length and chain terminus, and solvent. Particle fluxes are monitored by the change in absorbance of the solution in the receiving side of a diffusion cell. In general, flux increases when the membranes are modified with alkylsilanes compared to untreated membranes, which is attributed to the hydrophobic nature of the porous membranes and differences in wettability. We find that flux decreases, in both hexane and aqueous solutions, when the hydrocarbon chain lining the interior pore wall increases in length. The rate and selectivity of transport across these membranes is related to the partition coefficient (Kp) and the diffusion coefficient (D) of the permeating species. By conducting experiments as a function of initial particle concentration, we find that KpD increases with increasing particle size, is greater in alkylsilane-modified pores, and larger in hexane solution than water. The impact of the alkylsilane terminus (-CH3, -Br, -NH2, -COOH) on permeation in water is also examined. In water, the highest KpD is observed when the membranes are modified with carboxylic acid terminated silanes and lowest with amine terminated silanes as a result of electrostatic effects during translocation.",
author = "Stephens, {Jason R.} and Beveridge, {Jacob S.} and Williams, {Mary Elizabeth}",
year = "2011",
month = "9",
day = "21",
doi = "10.1039/c1an15448f",
language = "English (US)",
volume = "136",
pages = "3797--3802",
journal = "The Analyst",
issn = "0003-2654",
publisher = "Royal Society of Chemistry",
number = "18",

}

Diffusive flux of nanoparticles through chemically modified alumina membranes. / Stephens, Jason R.; Beveridge, Jacob S.; Williams, Mary Elizabeth.

In: Analyst, Vol. 136, No. 18, 21.09.2011, p. 3797-3802.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Diffusive flux of nanoparticles through chemically modified alumina membranes

AU - Stephens, Jason R.

AU - Beveridge, Jacob S.

AU - Williams, Mary Elizabeth

PY - 2011/9/21

Y1 - 2011/9/21

N2 - Surface chemistry plays an important role in determining flux through porous media such as in the environment. In this paper diffusive flux of nanoparticles through alkylsilane modified porous alumina is measured as a model for understanding transport in porous media of differing surface chemistries. Experiments are performed as a function of particle size, pore diameter, attached hydrocarbon chain length and chain terminus, and solvent. Particle fluxes are monitored by the change in absorbance of the solution in the receiving side of a diffusion cell. In general, flux increases when the membranes are modified with alkylsilanes compared to untreated membranes, which is attributed to the hydrophobic nature of the porous membranes and differences in wettability. We find that flux decreases, in both hexane and aqueous solutions, when the hydrocarbon chain lining the interior pore wall increases in length. The rate and selectivity of transport across these membranes is related to the partition coefficient (Kp) and the diffusion coefficient (D) of the permeating species. By conducting experiments as a function of initial particle concentration, we find that KpD increases with increasing particle size, is greater in alkylsilane-modified pores, and larger in hexane solution than water. The impact of the alkylsilane terminus (-CH3, -Br, -NH2, -COOH) on permeation in water is also examined. In water, the highest KpD is observed when the membranes are modified with carboxylic acid terminated silanes and lowest with amine terminated silanes as a result of electrostatic effects during translocation.

AB - Surface chemistry plays an important role in determining flux through porous media such as in the environment. In this paper diffusive flux of nanoparticles through alkylsilane modified porous alumina is measured as a model for understanding transport in porous media of differing surface chemistries. Experiments are performed as a function of particle size, pore diameter, attached hydrocarbon chain length and chain terminus, and solvent. Particle fluxes are monitored by the change in absorbance of the solution in the receiving side of a diffusion cell. In general, flux increases when the membranes are modified with alkylsilanes compared to untreated membranes, which is attributed to the hydrophobic nature of the porous membranes and differences in wettability. We find that flux decreases, in both hexane and aqueous solutions, when the hydrocarbon chain lining the interior pore wall increases in length. The rate and selectivity of transport across these membranes is related to the partition coefficient (Kp) and the diffusion coefficient (D) of the permeating species. By conducting experiments as a function of initial particle concentration, we find that KpD increases with increasing particle size, is greater in alkylsilane-modified pores, and larger in hexane solution than water. The impact of the alkylsilane terminus (-CH3, -Br, -NH2, -COOH) on permeation in water is also examined. In water, the highest KpD is observed when the membranes are modified with carboxylic acid terminated silanes and lowest with amine terminated silanes as a result of electrostatic effects during translocation.

UR - http://www.scopus.com/inward/record.url?scp=80052248918&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=80052248918&partnerID=8YFLogxK

U2 - 10.1039/c1an15448f

DO - 10.1039/c1an15448f

M3 - Article

C2 - 21799985

AN - SCOPUS:80052248918

VL - 136

SP - 3797

EP - 3802

JO - The Analyst

JF - The Analyst

SN - 0003-2654

IS - 18

ER -