Effect of prestrain on formability and forming limit strains during tube hydroforming

Chetan P. Nikhare, K. Narasimhan

Research output: Contribution to journalArticle

5 Citations (Scopus)

Abstract

The tube hydroforming process is a relatively complex manufacturing process; the performance of this process depends on various factors and requires proper combination of part design, material selection and boundary conditions. In manufacturing of automotive parts, such as engine cradles, frames rails, sub-frames, cross members, and other parts from circular tubes, prebending and per-forming operations are often required prior to the subsequent tubular hydroforming process to fit the tubular blank in the complex die shape. Due to these pre- hydroforming operations, some of the strains are already developed before going to the actual hydroforming process. Such developed strains before hydroforming process in the part is called as prestrain. In this paper the study of effect of prestrain on formability and forming limit strains during tube hydroforming is done by simulation by taking the material prestrain value. The forming limit strains of pre-strained tube during hydroforming are predicted. A series of tube bulge tests for tube hydroforming are simulated by a commercial finite element solver to predict the limit strains. Numerical simulation of forming limit strains in tube hydroforming with different internal pressure and different simulation set up with or without axial feeding are considered to develop wide range of strain paths in the present work. The effects of process conditions on the forming limit strains are detailed. In this paper the forming limit strains during tube hydroforming are simulated for prestrain and compared with zero prestrain. Prediction of limits strains is based on a novel thickness based necking criterion.

Original languageEnglish (US)
Pages (from-to)129-138
Number of pages10
JournalComputers, Materials and Continua
Volume7
Issue number3
StatePublished - Jun 1 2008

Fingerprint

Formability
Tube
Manufacturing
Material Design
Rails
Simulation
Engine
Die
Boundary conditions
Finite Element
Engines
Internal

All Science Journal Classification (ASJC) codes

  • Biomaterials
  • Modeling and Simulation
  • Mechanics of Materials
  • Computer Science Applications
  • Electrical and Electronic Engineering

Cite this

@article{023ec161fbc7475d849f6698d1d82119,
title = "Effect of prestrain on formability and forming limit strains during tube hydroforming",
abstract = "The tube hydroforming process is a relatively complex manufacturing process; the performance of this process depends on various factors and requires proper combination of part design, material selection and boundary conditions. In manufacturing of automotive parts, such as engine cradles, frames rails, sub-frames, cross members, and other parts from circular tubes, prebending and per-forming operations are often required prior to the subsequent tubular hydroforming process to fit the tubular blank in the complex die shape. Due to these pre- hydroforming operations, some of the strains are already developed before going to the actual hydroforming process. Such developed strains before hydroforming process in the part is called as prestrain. In this paper the study of effect of prestrain on formability and forming limit strains during tube hydroforming is done by simulation by taking the material prestrain value. The forming limit strains of pre-strained tube during hydroforming are predicted. A series of tube bulge tests for tube hydroforming are simulated by a commercial finite element solver to predict the limit strains. Numerical simulation of forming limit strains in tube hydroforming with different internal pressure and different simulation set up with or without axial feeding are considered to develop wide range of strain paths in the present work. The effects of process conditions on the forming limit strains are detailed. In this paper the forming limit strains during tube hydroforming are simulated for prestrain and compared with zero prestrain. Prediction of limits strains is based on a novel thickness based necking criterion.",
author = "Nikhare, {Chetan P.} and K. Narasimhan",
year = "2008",
month = "6",
day = "1",
language = "English (US)",
volume = "7",
pages = "129--138",
journal = "Computers, Materials and Continua",
issn = "1546-2218",
publisher = "Tech Science Press",
number = "3",

}

Effect of prestrain on formability and forming limit strains during tube hydroforming. / Nikhare, Chetan P.; Narasimhan, K.

In: Computers, Materials and Continua, Vol. 7, No. 3, 01.06.2008, p. 129-138.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Effect of prestrain on formability and forming limit strains during tube hydroforming

AU - Nikhare, Chetan P.

AU - Narasimhan, K.

PY - 2008/6/1

Y1 - 2008/6/1

N2 - The tube hydroforming process is a relatively complex manufacturing process; the performance of this process depends on various factors and requires proper combination of part design, material selection and boundary conditions. In manufacturing of automotive parts, such as engine cradles, frames rails, sub-frames, cross members, and other parts from circular tubes, prebending and per-forming operations are often required prior to the subsequent tubular hydroforming process to fit the tubular blank in the complex die shape. Due to these pre- hydroforming operations, some of the strains are already developed before going to the actual hydroforming process. Such developed strains before hydroforming process in the part is called as prestrain. In this paper the study of effect of prestrain on formability and forming limit strains during tube hydroforming is done by simulation by taking the material prestrain value. The forming limit strains of pre-strained tube during hydroforming are predicted. A series of tube bulge tests for tube hydroforming are simulated by a commercial finite element solver to predict the limit strains. Numerical simulation of forming limit strains in tube hydroforming with different internal pressure and different simulation set up with or without axial feeding are considered to develop wide range of strain paths in the present work. The effects of process conditions on the forming limit strains are detailed. In this paper the forming limit strains during tube hydroforming are simulated for prestrain and compared with zero prestrain. Prediction of limits strains is based on a novel thickness based necking criterion.

AB - The tube hydroforming process is a relatively complex manufacturing process; the performance of this process depends on various factors and requires proper combination of part design, material selection and boundary conditions. In manufacturing of automotive parts, such as engine cradles, frames rails, sub-frames, cross members, and other parts from circular tubes, prebending and per-forming operations are often required prior to the subsequent tubular hydroforming process to fit the tubular blank in the complex die shape. Due to these pre- hydroforming operations, some of the strains are already developed before going to the actual hydroforming process. Such developed strains before hydroforming process in the part is called as prestrain. In this paper the study of effect of prestrain on formability and forming limit strains during tube hydroforming is done by simulation by taking the material prestrain value. The forming limit strains of pre-strained tube during hydroforming are predicted. A series of tube bulge tests for tube hydroforming are simulated by a commercial finite element solver to predict the limit strains. Numerical simulation of forming limit strains in tube hydroforming with different internal pressure and different simulation set up with or without axial feeding are considered to develop wide range of strain paths in the present work. The effects of process conditions on the forming limit strains are detailed. In this paper the forming limit strains during tube hydroforming are simulated for prestrain and compared with zero prestrain. Prediction of limits strains is based on a novel thickness based necking criterion.

UR - http://www.scopus.com/inward/record.url?scp=49749084844&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=49749084844&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:49749084844

VL - 7

SP - 129

EP - 138

JO - Computers, Materials and Continua

JF - Computers, Materials and Continua

SN - 1546-2218

IS - 3

ER -