Effect of temperature, width, and fiber angle on tensile behavior of a fiber-dominated carbon/epoxy composite

Ambuj Sharma, Ryan Paszkowski, Charles E. Bakis

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

A test program was conducted to investigate the effects of specimen width, elevated temperature, and fiber angle on tensile strength and fatigue of a carbon/epoxy composite used in filament wound flywheel rotor rims. Test coupons were manufactured with three fiber orientations representative of flywheels and three specimen widths. In unidirectional and balanced angle-ply material, it was found that fiber angles of up to 5 deg. from the loading axis had a highly significant effect on quasi-static and fatigue strengths, but not on the elastic modulus. Fiber angle had a more significant effect on quasi-static strength than on fatigue lifetime. The quasistatic and fatigue strengths of the 12.7- and 24.5-mm wide specimens were slightly higher than those of the 12.7-mm-wide specimens, suggesting that cut axial ends of flywheels are potentially the critical locations to consider in the design of flywheel rims. Increases in the test temperature led to monotonically decreasing quasi-static strengths. The trends in fatigue strength versus temperature were not as clear, which indicates that temperatures up to values of approximately 30°C below the glass transition temperature of these materials do not affect their fatigue behaviors significantly.

Original languageEnglish (US)
Title of host publicationSAMPE 2004
Pages989-1001
Number of pages13
StatePublished - 2004
EventSAMPE 2004 - Long Beach, CA, United States
Duration: May 16 2004May 20 2004

Other

OtherSAMPE 2004
CountryUnited States
CityLong Beach, CA
Period5/16/045/20/04

Fingerprint

Flywheels
Carbon fibers
Fibers
Composite materials
Fatigue of materials
Temperature
Fiber reinforced materials
Tensile strength
Carbon
Rotors
Elastic moduli
carbon fiber
Fatigue strength

All Science Journal Classification (ASJC) codes

  • Building and Construction
  • Chemical Engineering(all)
  • Polymers and Plastics
  • Chemical Engineering (miscellaneous)

Cite this

@inproceedings{a6cdcb4ab43d45c9a971f7aa63320ab1,
title = "Effect of temperature, width, and fiber angle on tensile behavior of a fiber-dominated carbon/epoxy composite",
abstract = "A test program was conducted to investigate the effects of specimen width, elevated temperature, and fiber angle on tensile strength and fatigue of a carbon/epoxy composite used in filament wound flywheel rotor rims. Test coupons were manufactured with three fiber orientations representative of flywheels and three specimen widths. In unidirectional and balanced angle-ply material, it was found that fiber angles of up to 5 deg. from the loading axis had a highly significant effect on quasi-static and fatigue strengths, but not on the elastic modulus. Fiber angle had a more significant effect on quasi-static strength than on fatigue lifetime. The quasistatic and fatigue strengths of the 12.7- and 24.5-mm wide specimens were slightly higher than those of the 12.7-mm-wide specimens, suggesting that cut axial ends of flywheels are potentially the critical locations to consider in the design of flywheel rims. Increases in the test temperature led to monotonically decreasing quasi-static strengths. The trends in fatigue strength versus temperature were not as clear, which indicates that temperatures up to values of approximately 30°C below the glass transition temperature of these materials do not affect their fatigue behaviors significantly.",
author = "Ambuj Sharma and Ryan Paszkowski and Bakis, {Charles E.}",
year = "2004",
language = "English (US)",
pages = "989--1001",
booktitle = "SAMPE 2004",

}

Sharma, A, Paszkowski, R & Bakis, CE 2004, Effect of temperature, width, and fiber angle on tensile behavior of a fiber-dominated carbon/epoxy composite. in SAMPE 2004. pp. 989-1001, SAMPE 2004, Long Beach, CA, United States, 5/16/04.

Effect of temperature, width, and fiber angle on tensile behavior of a fiber-dominated carbon/epoxy composite. / Sharma, Ambuj; Paszkowski, Ryan; Bakis, Charles E.

SAMPE 2004. 2004. p. 989-1001.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - Effect of temperature, width, and fiber angle on tensile behavior of a fiber-dominated carbon/epoxy composite

AU - Sharma, Ambuj

AU - Paszkowski, Ryan

AU - Bakis, Charles E.

PY - 2004

Y1 - 2004

N2 - A test program was conducted to investigate the effects of specimen width, elevated temperature, and fiber angle on tensile strength and fatigue of a carbon/epoxy composite used in filament wound flywheel rotor rims. Test coupons were manufactured with three fiber orientations representative of flywheels and three specimen widths. In unidirectional and balanced angle-ply material, it was found that fiber angles of up to 5 deg. from the loading axis had a highly significant effect on quasi-static and fatigue strengths, but not on the elastic modulus. Fiber angle had a more significant effect on quasi-static strength than on fatigue lifetime. The quasistatic and fatigue strengths of the 12.7- and 24.5-mm wide specimens were slightly higher than those of the 12.7-mm-wide specimens, suggesting that cut axial ends of flywheels are potentially the critical locations to consider in the design of flywheel rims. Increases in the test temperature led to monotonically decreasing quasi-static strengths. The trends in fatigue strength versus temperature were not as clear, which indicates that temperatures up to values of approximately 30°C below the glass transition temperature of these materials do not affect their fatigue behaviors significantly.

AB - A test program was conducted to investigate the effects of specimen width, elevated temperature, and fiber angle on tensile strength and fatigue of a carbon/epoxy composite used in filament wound flywheel rotor rims. Test coupons were manufactured with three fiber orientations representative of flywheels and three specimen widths. In unidirectional and balanced angle-ply material, it was found that fiber angles of up to 5 deg. from the loading axis had a highly significant effect on quasi-static and fatigue strengths, but not on the elastic modulus. Fiber angle had a more significant effect on quasi-static strength than on fatigue lifetime. The quasistatic and fatigue strengths of the 12.7- and 24.5-mm wide specimens were slightly higher than those of the 12.7-mm-wide specimens, suggesting that cut axial ends of flywheels are potentially the critical locations to consider in the design of flywheel rims. Increases in the test temperature led to monotonically decreasing quasi-static strengths. The trends in fatigue strength versus temperature were not as clear, which indicates that temperatures up to values of approximately 30°C below the glass transition temperature of these materials do not affect their fatigue behaviors significantly.

UR - http://www.scopus.com/inward/record.url?scp=4544290028&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=4544290028&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:4544290028

SP - 989

EP - 1001

BT - SAMPE 2004

ER -