Encapsulation and permeability characteristics of plasma polymerized hollow particles

Anaram Shahravan, Themis Matsoukas

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

Encapsulation and Permeability Characteristics of Plasma Polymerized Hollow Particles In this protocol, core-shell nanostructures are synthesized by plasma enhanced chemical vapor deposition. We produce an amorphous barrier by plasma polymerization of isopropanol on various solid substrates, including silica and potassium chloride. This versatile technique is used to treat nanoparticles and nanopowders with sizes ranging from 37 nm to 1 micron, by depositing films whose thickness can be anywhere from 1 nm to upwards of 100 nm. Dissolution of the core allows us to study the rate of permeation through the film. In these experiments, we determine the diffusion coefficient of KCl through the barrier film by coating KCL nanocrystals and subsequently monitoring the ionic conductivity of the coated particles suspended in water. The primary interest in this process is the encapsulation and delayed release of solutes. The thickness of the shell is one of the independent variables by which we control the rate of release. It has a strong effect on the rate of release, which increases from a six-hour release (shell thickness is 20 nm) to a long-term release over 30 days (shell thickness is 95 nm). The release profile shows a characteristic behavior: a fast release (35% of the final materials) during the first five minutes after the beginning of the dissolution, and a slower release till all of the core materials come out.

Original languageEnglish (US)
JournalJournal of Visualized Experiments
Issue number66
DOIs
StatePublished - Aug 16 2012

Fingerprint

Encapsulation
Permeability
Dissolution
Plasmas
Plasma polymerization
Nanoparticles
Potassium Chloride
2-Propanol
Ionic conductivity
Plasma enhanced chemical vapor deposition
Permeation
Silicon Dioxide
Nanocrystals
Film thickness
Potassium
Nanostructures
Silica
Polymerization
Coatings
Water

All Science Journal Classification (ASJC) codes

  • Neuroscience(all)
  • Chemical Engineering(all)
  • Biochemistry, Genetics and Molecular Biology(all)
  • Immunology and Microbiology(all)

Cite this

@article{db868d3b742f47e98394b7df8f401ed1,
title = "Encapsulation and permeability characteristics of plasma polymerized hollow particles",
abstract = "Encapsulation and Permeability Characteristics of Plasma Polymerized Hollow Particles In this protocol, core-shell nanostructures are synthesized by plasma enhanced chemical vapor deposition. We produce an amorphous barrier by plasma polymerization of isopropanol on various solid substrates, including silica and potassium chloride. This versatile technique is used to treat nanoparticles and nanopowders with sizes ranging from 37 nm to 1 micron, by depositing films whose thickness can be anywhere from 1 nm to upwards of 100 nm. Dissolution of the core allows us to study the rate of permeation through the film. In these experiments, we determine the diffusion coefficient of KCl through the barrier film by coating KCL nanocrystals and subsequently monitoring the ionic conductivity of the coated particles suspended in water. The primary interest in this process is the encapsulation and delayed release of solutes. The thickness of the shell is one of the independent variables by which we control the rate of release. It has a strong effect on the rate of release, which increases from a six-hour release (shell thickness is 20 nm) to a long-term release over 30 days (shell thickness is 95 nm). The release profile shows a characteristic behavior: a fast release (35{\%} of the final materials) during the first five minutes after the beginning of the dissolution, and a slower release till all of the core materials come out.",
author = "Anaram Shahravan and Themis Matsoukas",
year = "2012",
month = "8",
day = "16",
doi = "10.3791/4113",
language = "English (US)",
journal = "Journal of Visualized Experiments",
issn = "1940-087X",
publisher = "MYJoVE Corporation",
number = "66",

}

Encapsulation and permeability characteristics of plasma polymerized hollow particles. / Shahravan, Anaram; Matsoukas, Themis.

In: Journal of Visualized Experiments, No. 66, 16.08.2012.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Encapsulation and permeability characteristics of plasma polymerized hollow particles

AU - Shahravan, Anaram

AU - Matsoukas, Themis

PY - 2012/8/16

Y1 - 2012/8/16

N2 - Encapsulation and Permeability Characteristics of Plasma Polymerized Hollow Particles In this protocol, core-shell nanostructures are synthesized by plasma enhanced chemical vapor deposition. We produce an amorphous barrier by plasma polymerization of isopropanol on various solid substrates, including silica and potassium chloride. This versatile technique is used to treat nanoparticles and nanopowders with sizes ranging from 37 nm to 1 micron, by depositing films whose thickness can be anywhere from 1 nm to upwards of 100 nm. Dissolution of the core allows us to study the rate of permeation through the film. In these experiments, we determine the diffusion coefficient of KCl through the barrier film by coating KCL nanocrystals and subsequently monitoring the ionic conductivity of the coated particles suspended in water. The primary interest in this process is the encapsulation and delayed release of solutes. The thickness of the shell is one of the independent variables by which we control the rate of release. It has a strong effect on the rate of release, which increases from a six-hour release (shell thickness is 20 nm) to a long-term release over 30 days (shell thickness is 95 nm). The release profile shows a characteristic behavior: a fast release (35% of the final materials) during the first five minutes after the beginning of the dissolution, and a slower release till all of the core materials come out.

AB - Encapsulation and Permeability Characteristics of Plasma Polymerized Hollow Particles In this protocol, core-shell nanostructures are synthesized by plasma enhanced chemical vapor deposition. We produce an amorphous barrier by plasma polymerization of isopropanol on various solid substrates, including silica and potassium chloride. This versatile technique is used to treat nanoparticles and nanopowders with sizes ranging from 37 nm to 1 micron, by depositing films whose thickness can be anywhere from 1 nm to upwards of 100 nm. Dissolution of the core allows us to study the rate of permeation through the film. In these experiments, we determine the diffusion coefficient of KCl through the barrier film by coating KCL nanocrystals and subsequently monitoring the ionic conductivity of the coated particles suspended in water. The primary interest in this process is the encapsulation and delayed release of solutes. The thickness of the shell is one of the independent variables by which we control the rate of release. It has a strong effect on the rate of release, which increases from a six-hour release (shell thickness is 20 nm) to a long-term release over 30 days (shell thickness is 95 nm). The release profile shows a characteristic behavior: a fast release (35% of the final materials) during the first five minutes after the beginning of the dissolution, and a slower release till all of the core materials come out.

UR - http://www.scopus.com/inward/record.url?scp=84868282342&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84868282342&partnerID=8YFLogxK

U2 - 10.3791/4113

DO - 10.3791/4113

M3 - Article

C2 - 22929119

AN - SCOPUS:84868282342

JO - Journal of Visualized Experiments

JF - Journal of Visualized Experiments

SN - 1940-087X

IS - 66

ER -