Enhanced mechanical properties and microstructure of accumulative roll-bonded co/pb nanocomposite

Maryam Karbasi, Eskandar Keshavarz Alamdari, Elahe Amirkhani Dehkordi, Zulfiqar A. Khan, Fariborz Tavangarian

Research output: Contribution to journalArticlepeer-review

Abstract

Lead composites have been used as anodes in the electrowinning process to produce metals such as copper and zinc. Manufacturing stable lead anodes with appropriate mechanical and chemical properties is required to improve the performance of the electrowinning process. In this study, an accumulative roll bonding (ARB) method was used to fabricate a Co/Pb nanocomposite. Utilizing the ARB method can help us to achieve a uniform structure with enhanced mechanical properties via severe plastic deformation. The results showed that suitable tensile properties were obtained in Pb–0.5%Co–10pass samples. The tensile strength and strain of these samples were 2.51 times higher and 83.7% lower than that of as-cast pure Pb. They also showed creep resistance and hardness up to 1.8 and 2.5 times more than that of as-cast pure Pb. The ARB technique uniformly distributed Co particles in the Pb matrix. The enhanced strength of Pb samples was observed in the composite including grain sizes of less than 50 nm as a result of hindering the recovery phenomenon. The particle size of the Co distributed in the Pb matrix was 353 ± 259 nm. Compared to conventional methods, the ARB process improved the mechanical properties of Co/Pb composites and can open a new horizon to fabricating this composite in metal industries.

Original languageEnglish (US)
Article number1190
JournalNanomaterials
Volume11
Issue number5
DOIs
StatePublished - May 2021

All Science Journal Classification (ASJC) codes

  • Chemical Engineering(all)
  • Materials Science(all)

Fingerprint

Dive into the research topics of 'Enhanced mechanical properties and microstructure of accumulative roll-bonded co/pb nanocomposite'. Together they form a unique fingerprint.

Cite this