Enhancing high power performances of Pb(Mn1/3Nb2/3)O3–Pb(Zr,Ti)O3 ceramics by Bi(Ni1/2Ti1/2)O3 modification

Yang Yu, Jikun Yang, Jingen Wu, Lang Bian, Xiaotian Li, Wanping Chen, Shuxiang Dong

Research output: Contribution to journalArticlepeer-review

Abstract

High power piezoelectric ceramics 0.04Bi(Ni1/2Ti1/2)O3-xPb(Mn1/3Nb2/3)O3-(0.96-x)Pb(ZryTi1-y)O3 (BNT-xPMnN-PZyT) with various contents of PMnN from 0 to 12 mol% (keep y = 0.50) and Zr/Ti ratio gradually increasing from 48/52 to 52/48 (keep x = 0.06) were prepared by solid-state method. X-ray diffraction (XRD) results show a single phase of polycrystalline perovskite and indicate that the phase structure transforms from tetragonal phase to rhombohedral with x and y increasing. The optimal comprehensive properties of BNT-xPMnN-PZyT ceramic, d33 (355 pC/N), kp (0.58), εr (1512), tanδ (0.40%), Tc (336 °C) and Qm (2010), are obtained at x = 0.06 and y = 0.50, which are apparently superior to typical or commercial Pb(Zr,Ti)O3 (PZT) based power ceramics. Within the range from room temperature to 200 °C, the variation of electric-field induced strains is less than 8.3%, indicating its good temperature stability. The maximum vibration velocity of the ceramic at temperature rise of 20 °C is measured to be 0.92 m/s, which is about 2 times higher than that of commercial hard PZT ceramics, suggesting the BNT-xPMnN-PZyT ceramic is a competitive and potential candidate for power piezoelectric transduction and actuation applications.

Original languageEnglish (US)
Pages (from-to)19103-19110
Number of pages8
JournalCeramics International
Volume46
Issue number11
DOIs
StatePublished - Aug 1 2020

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Ceramics and Composites
  • Process Chemistry and Technology
  • Surfaces, Coatings and Films
  • Materials Chemistry

Fingerprint Dive into the research topics of 'Enhancing high power performances of Pb(Mn<sub>1/3</sub>Nb<sub>2/3</sub>)O<sub>3</sub>–Pb(Zr,Ti)O<sub>3</sub> ceramics by Bi(Ni<sub>1/2</sub>Ti<sub>1/2</sub>)O<sub>3</sub> modification'. Together they form a unique fingerprint.

Cite this