Evaluating Lab-, Pilot-, and Bench-scale Pressure Filtration Systems for Dewatering of Coal Refuse Slurry

Gireesh S.S. Raman, Mark S. Klima

Research output: Contribution to journalArticle

Abstract

Pressure filtration testing was carried out to dewater coal refuse slurry obtained from the thickener underflow stream of an operating coal preparation facility in Pennsylvania. Pressure filtration offers an opportunity to dewater refuse solids so that they can be stacked for long-term storage, while increasing the quantity of water available for recycling. Lab-, pilot- and bench-scale pressure filters were tested. Results from the lab-scale plate filter indicated a steep decrease in cake moisture for the first 120 seconds of the filtration cycle, beyond which further decrease in cake moisture was achieved only by initiation of air-blow. Similar trends were observed with the pilot-scale plate filter, with a 1.5% cake moisture reduction for every minute of air-blow after the initial sharp decrease. Cake moistures of about 30% were achieved for both units, though cake thickness can influence cake moisture. Filtrate flux values were also similar for the lab- and pilot-scale plate filters, indicating a linear scale-up with respect to the filter area. Analysis of the filtrate flux for various thicknesses in the lab-scale plate filter indicated that filtrate flux, for a given filter area, increased with increase in cake thickness. Upon normalization of filtrate flux based on cake thickness, the thinnest cake was shown to have the highest filtrate flux per unit thickness. Bench-scale pressure filtration results gave similar trends on filtrate flux and cake moisture, indicating that testing at this level can be used as a screening tool prior to scale-up testing.

Original languageEnglish (US)
JournalInternational Journal of Coal Preparation and Utilization
DOIs
StateAccepted/In press - Jan 1 2018

Fingerprint

Coal
Dewatering
refuse
dewatering
slurry
coal
Fluxes
filter
Moisture
moisture
Testing
Coal preparation
Air
air
Recycling
Screening
recycling
Water

All Science Journal Classification (ASJC) codes

  • Chemical Engineering(all)
  • Fuel Technology
  • Geotechnical Engineering and Engineering Geology
  • Energy Engineering and Power Technology
  • Mechanical Engineering

Cite this

@article{3482e5df3efe40e8a0a0a92d4b200d3b,
title = "Evaluating Lab-, Pilot-, and Bench-scale Pressure Filtration Systems for Dewatering of Coal Refuse Slurry",
abstract = "Pressure filtration testing was carried out to dewater coal refuse slurry obtained from the thickener underflow stream of an operating coal preparation facility in Pennsylvania. Pressure filtration offers an opportunity to dewater refuse solids so that they can be stacked for long-term storage, while increasing the quantity of water available for recycling. Lab-, pilot- and bench-scale pressure filters were tested. Results from the lab-scale plate filter indicated a steep decrease in cake moisture for the first 120 seconds of the filtration cycle, beyond which further decrease in cake moisture was achieved only by initiation of air-blow. Similar trends were observed with the pilot-scale plate filter, with a 1.5{\%} cake moisture reduction for every minute of air-blow after the initial sharp decrease. Cake moistures of about 30{\%} were achieved for both units, though cake thickness can influence cake moisture. Filtrate flux values were also similar for the lab- and pilot-scale plate filters, indicating a linear scale-up with respect to the filter area. Analysis of the filtrate flux for various thicknesses in the lab-scale plate filter indicated that filtrate flux, for a given filter area, increased with increase in cake thickness. Upon normalization of filtrate flux based on cake thickness, the thinnest cake was shown to have the highest filtrate flux per unit thickness. Bench-scale pressure filtration results gave similar trends on filtrate flux and cake moisture, indicating that testing at this level can be used as a screening tool prior to scale-up testing.",
author = "Raman, {Gireesh S.S.} and Klima, {Mark S.}",
year = "2018",
month = "1",
day = "1",
doi = "10.1080/19392699.2018.1471068",
language = "English (US)",
journal = "International Journal of Coal Preparation and Utilization",
issn = "1939-2699",
publisher = "Routledge",

}

TY - JOUR

T1 - Evaluating Lab-, Pilot-, and Bench-scale Pressure Filtration Systems for Dewatering of Coal Refuse Slurry

AU - Raman, Gireesh S.S.

AU - Klima, Mark S.

PY - 2018/1/1

Y1 - 2018/1/1

N2 - Pressure filtration testing was carried out to dewater coal refuse slurry obtained from the thickener underflow stream of an operating coal preparation facility in Pennsylvania. Pressure filtration offers an opportunity to dewater refuse solids so that they can be stacked for long-term storage, while increasing the quantity of water available for recycling. Lab-, pilot- and bench-scale pressure filters were tested. Results from the lab-scale plate filter indicated a steep decrease in cake moisture for the first 120 seconds of the filtration cycle, beyond which further decrease in cake moisture was achieved only by initiation of air-blow. Similar trends were observed with the pilot-scale plate filter, with a 1.5% cake moisture reduction for every minute of air-blow after the initial sharp decrease. Cake moistures of about 30% were achieved for both units, though cake thickness can influence cake moisture. Filtrate flux values were also similar for the lab- and pilot-scale plate filters, indicating a linear scale-up with respect to the filter area. Analysis of the filtrate flux for various thicknesses in the lab-scale plate filter indicated that filtrate flux, for a given filter area, increased with increase in cake thickness. Upon normalization of filtrate flux based on cake thickness, the thinnest cake was shown to have the highest filtrate flux per unit thickness. Bench-scale pressure filtration results gave similar trends on filtrate flux and cake moisture, indicating that testing at this level can be used as a screening tool prior to scale-up testing.

AB - Pressure filtration testing was carried out to dewater coal refuse slurry obtained from the thickener underflow stream of an operating coal preparation facility in Pennsylvania. Pressure filtration offers an opportunity to dewater refuse solids so that they can be stacked for long-term storage, while increasing the quantity of water available for recycling. Lab-, pilot- and bench-scale pressure filters were tested. Results from the lab-scale plate filter indicated a steep decrease in cake moisture for the first 120 seconds of the filtration cycle, beyond which further decrease in cake moisture was achieved only by initiation of air-blow. Similar trends were observed with the pilot-scale plate filter, with a 1.5% cake moisture reduction for every minute of air-blow after the initial sharp decrease. Cake moistures of about 30% were achieved for both units, though cake thickness can influence cake moisture. Filtrate flux values were also similar for the lab- and pilot-scale plate filters, indicating a linear scale-up with respect to the filter area. Analysis of the filtrate flux for various thicknesses in the lab-scale plate filter indicated that filtrate flux, for a given filter area, increased with increase in cake thickness. Upon normalization of filtrate flux based on cake thickness, the thinnest cake was shown to have the highest filtrate flux per unit thickness. Bench-scale pressure filtration results gave similar trends on filtrate flux and cake moisture, indicating that testing at this level can be used as a screening tool prior to scale-up testing.

UR - http://www.scopus.com/inward/record.url?scp=85055320978&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85055320978&partnerID=8YFLogxK

U2 - 10.1080/19392699.2018.1471068

DO - 10.1080/19392699.2018.1471068

M3 - Article

AN - SCOPUS:85055320978

JO - International Journal of Coal Preparation and Utilization

JF - International Journal of Coal Preparation and Utilization

SN - 1939-2699

ER -