Experimental Analysis of Alkali-Brine-Alcohol Phase Behavior with HighAcid Number Crude Oil

Daulet Magzymov, Torsten Clemens, Bettina Schumi, Russell T. Johns

Research output: Contribution to conferencePaperpeer-review

Abstract

A potential enhanced oil recovery (EOR) technique is to inject alkali into a reservoir with a high total-acid-number (TAN) crude to generate soap in situ and reduce interfacial tension (IFT). The method may becost-effective if the IFT can be lowered enough to cause significant mobilization of trapped oil, while alsoavoiding formation of gel/viscous microemulsions. This paper investigates the potential field application of injecting alkali to generate in situ soap andfavorable phase behavior for a high TAN oil. Oil analysis results show that the acids in the crude are acomplex mixture of various polar species and not mainly carboxylic acids. Phase behavior experimentsshow that the system does not undergo typical Winsor microemulsion behavior. Therefore, traditionalmicroemulsion models can cause unreliable recovery estimates. The mixing of alkali and crude/brine cangenerate water-in-oil macroemulsions that are highly viscous instead of forming the classical Winsor types.Good core flood recovery cannot be explained by the formation of a Winsor microemulsion phase, asis expected in surfactant EOR, mainly because these macroemulsions form before such idealized phasebehavior can occur. A substantial decrease in interfacial tension is observed without the formation of aviscous phase in a narrow window of alkali concentration. Corefloods with polymer perform well in thisconcentration range, although incremental recovery could be overestimated some owing to increased watersolubility in oil within these macroemulsions. The viscous phase behavior at large alkali concentrations is likely explained by the formation of salt-crude complexes, created by acids from the crude oil under the alkali environment. These hydrophobicmolecules tend to agglomerate at the oil-water interface. Together with polar components from the crudeoil, they can organize into a highly viscous network and stabilize water droplets in the oleic phase. Oil-soluble alcohol was added to counter those two phenomena at large concentrations, but typical Winsor phasebehavior was still not observed. A physicochemical model is proposed to explain the salt-crude complexformation at the oil-water interface that inhibits classical Winsor behavior.

Original languageEnglish (US)
DOIs
StatePublished - 2020
EventSPE Annual Technical Conference and Exhibition 2020, ATCE 2020 - Virtual, Online
Duration: Oct 26 2020Oct 29 2020

Conference

ConferenceSPE Annual Technical Conference and Exhibition 2020, ATCE 2020
CityVirtual, Online
Period10/26/2010/29/20

All Science Journal Classification (ASJC) codes

  • Fuel Technology
  • Energy Engineering and Power Technology

Fingerprint

Dive into the research topics of 'Experimental Analysis of Alkali-Brine-Alcohol Phase Behavior with HighAcid Number Crude Oil'. Together they form a unique fingerprint.

Cite this