Experimental investigation of aluminum particle dust cloud combustion

Grant Alexander Risha, Ying Huang, Richard A. Yetter, Vigor Yang

Research output: Contribution to conferencePaper

22 Citations (Scopus)

Abstract

An experimental investigation has been conducted to determine laminar flame speeds of micron- and nano-sized aluminum particle-laden aerosols using a Bunsen-burner type dust cloud apparatus under various well-controlled operating conditions. The aerosol compositions consisted of various percentages of different sized particles mixed with air (at a constant rate flow of 26.3 LPM) ranging from 100% micro-sized particles (5-8 μm) to mixtures with 30% by mass nanoparticles (100 nm). The dust concentration, β, was varied from 263 to 448 g/m3 (0.81≤ φ≤1.62). Measured laminar flame speeds of Al particle / air mixtures were found to be independent of equivalence ratio due in part to a small variation of flame temperature. The effect of oxidizer flow velocity was investigated to determine the influence of jet momentum on particle breakup and laminar flame speed. Flame speeds asymptotically increased with higher oxidizer shear velocity to finally reach a nearly constant rate. Therefore, the oxidizer inlet velocity was maintained beyond 200 m/s for maximum particle breakup. Hydrogen (ranging from 0% to 8% by vol) was introduced into the flow to provide high-temperature steam in the aerosol as well as to modify the thermal diffusivity and conductivity of the aerosol gas. The addition of H2 caused the flame speed to increase due to its high thermal conductivity which is nearly seven times that of air. Thermophoretic sampling was performed to determine the transition of Al to Al2O3 through the flame zone. From the data analyzed, high-resolution micrographs showed the inner portion of the flame consisted of only aluminum and its outer flame region was comprised of smaller stoichiometric Al2O3 particles. Energy dispersion spectroscopy (EDS) results further verified that the core area of the flame was aluminum and the outer flame region consisted of elemental oxygen and aluminum at an approximate ratio of 3 to 2.

Original languageEnglish (US)
Pages8375-8388
Number of pages14
StatePublished - Dec 1 2005
Event43rd AIAA Aerospace Sciences Meeting and Exhibit - Reno, NV, United States
Duration: Jan 10 2005Jan 13 2005

Other

Other43rd AIAA Aerospace Sciences Meeting and Exhibit
CountryUnited States
CityReno, NV
Period1/10/051/13/05

Fingerprint

Particles (particulate matter)
Dust
Aerosols
Aluminum
Thermal conductivity
Air
Thermal diffusivity
Fuel burners
Flow velocity
Momentum
Steam
Flow rate
Spectroscopy
Sampling
Nanoparticles
Hydrogen
Temperature
Oxygen
Chemical analysis
Gases

All Science Journal Classification (ASJC) codes

  • Engineering(all)

Cite this

Risha, G. A., Huang, Y., Yetter, R. A., & Yang, V. (2005). Experimental investigation of aluminum particle dust cloud combustion. 8375-8388. Paper presented at 43rd AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, United States.
Risha, Grant Alexander ; Huang, Ying ; Yetter, Richard A. ; Yang, Vigor. / Experimental investigation of aluminum particle dust cloud combustion. Paper presented at 43rd AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, United States.14 p.
@conference{dfe80e94fdf4481d8695d1fe447dbb50,
title = "Experimental investigation of aluminum particle dust cloud combustion",
abstract = "An experimental investigation has been conducted to determine laminar flame speeds of micron- and nano-sized aluminum particle-laden aerosols using a Bunsen-burner type dust cloud apparatus under various well-controlled operating conditions. The aerosol compositions consisted of various percentages of different sized particles mixed with air (at a constant rate flow of 26.3 LPM) ranging from 100{\%} micro-sized particles (5-8 μm) to mixtures with 30{\%} by mass nanoparticles (100 nm). The dust concentration, β, was varied from 263 to 448 g/m3 (0.81≤ φ≤1.62). Measured laminar flame speeds of Al particle / air mixtures were found to be independent of equivalence ratio due in part to a small variation of flame temperature. The effect of oxidizer flow velocity was investigated to determine the influence of jet momentum on particle breakup and laminar flame speed. Flame speeds asymptotically increased with higher oxidizer shear velocity to finally reach a nearly constant rate. Therefore, the oxidizer inlet velocity was maintained beyond 200 m/s for maximum particle breakup. Hydrogen (ranging from 0{\%} to 8{\%} by vol) was introduced into the flow to provide high-temperature steam in the aerosol as well as to modify the thermal diffusivity and conductivity of the aerosol gas. The addition of H2 caused the flame speed to increase due to its high thermal conductivity which is nearly seven times that of air. Thermophoretic sampling was performed to determine the transition of Al to Al2O3 through the flame zone. From the data analyzed, high-resolution micrographs showed the inner portion of the flame consisted of only aluminum and its outer flame region was comprised of smaller stoichiometric Al2O3 particles. Energy dispersion spectroscopy (EDS) results further verified that the core area of the flame was aluminum and the outer flame region consisted of elemental oxygen and aluminum at an approximate ratio of 3 to 2.",
author = "Risha, {Grant Alexander} and Ying Huang and Yetter, {Richard A.} and Vigor Yang",
year = "2005",
month = "12",
day = "1",
language = "English (US)",
pages = "8375--8388",
note = "43rd AIAA Aerospace Sciences Meeting and Exhibit ; Conference date: 10-01-2005 Through 13-01-2005",

}

Risha, GA, Huang, Y, Yetter, RA & Yang, V 2005, 'Experimental investigation of aluminum particle dust cloud combustion' Paper presented at 43rd AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, United States, 1/10/05 - 1/13/05, pp. 8375-8388.

Experimental investigation of aluminum particle dust cloud combustion. / Risha, Grant Alexander; Huang, Ying; Yetter, Richard A.; Yang, Vigor.

2005. 8375-8388 Paper presented at 43rd AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, United States.

Research output: Contribution to conferencePaper

TY - CONF

T1 - Experimental investigation of aluminum particle dust cloud combustion

AU - Risha, Grant Alexander

AU - Huang, Ying

AU - Yetter, Richard A.

AU - Yang, Vigor

PY - 2005/12/1

Y1 - 2005/12/1

N2 - An experimental investigation has been conducted to determine laminar flame speeds of micron- and nano-sized aluminum particle-laden aerosols using a Bunsen-burner type dust cloud apparatus under various well-controlled operating conditions. The aerosol compositions consisted of various percentages of different sized particles mixed with air (at a constant rate flow of 26.3 LPM) ranging from 100% micro-sized particles (5-8 μm) to mixtures with 30% by mass nanoparticles (100 nm). The dust concentration, β, was varied from 263 to 448 g/m3 (0.81≤ φ≤1.62). Measured laminar flame speeds of Al particle / air mixtures were found to be independent of equivalence ratio due in part to a small variation of flame temperature. The effect of oxidizer flow velocity was investigated to determine the influence of jet momentum on particle breakup and laminar flame speed. Flame speeds asymptotically increased with higher oxidizer shear velocity to finally reach a nearly constant rate. Therefore, the oxidizer inlet velocity was maintained beyond 200 m/s for maximum particle breakup. Hydrogen (ranging from 0% to 8% by vol) was introduced into the flow to provide high-temperature steam in the aerosol as well as to modify the thermal diffusivity and conductivity of the aerosol gas. The addition of H2 caused the flame speed to increase due to its high thermal conductivity which is nearly seven times that of air. Thermophoretic sampling was performed to determine the transition of Al to Al2O3 through the flame zone. From the data analyzed, high-resolution micrographs showed the inner portion of the flame consisted of only aluminum and its outer flame region was comprised of smaller stoichiometric Al2O3 particles. Energy dispersion spectroscopy (EDS) results further verified that the core area of the flame was aluminum and the outer flame region consisted of elemental oxygen and aluminum at an approximate ratio of 3 to 2.

AB - An experimental investigation has been conducted to determine laminar flame speeds of micron- and nano-sized aluminum particle-laden aerosols using a Bunsen-burner type dust cloud apparatus under various well-controlled operating conditions. The aerosol compositions consisted of various percentages of different sized particles mixed with air (at a constant rate flow of 26.3 LPM) ranging from 100% micro-sized particles (5-8 μm) to mixtures with 30% by mass nanoparticles (100 nm). The dust concentration, β, was varied from 263 to 448 g/m3 (0.81≤ φ≤1.62). Measured laminar flame speeds of Al particle / air mixtures were found to be independent of equivalence ratio due in part to a small variation of flame temperature. The effect of oxidizer flow velocity was investigated to determine the influence of jet momentum on particle breakup and laminar flame speed. Flame speeds asymptotically increased with higher oxidizer shear velocity to finally reach a nearly constant rate. Therefore, the oxidizer inlet velocity was maintained beyond 200 m/s for maximum particle breakup. Hydrogen (ranging from 0% to 8% by vol) was introduced into the flow to provide high-temperature steam in the aerosol as well as to modify the thermal diffusivity and conductivity of the aerosol gas. The addition of H2 caused the flame speed to increase due to its high thermal conductivity which is nearly seven times that of air. Thermophoretic sampling was performed to determine the transition of Al to Al2O3 through the flame zone. From the data analyzed, high-resolution micrographs showed the inner portion of the flame consisted of only aluminum and its outer flame region was comprised of smaller stoichiometric Al2O3 particles. Energy dispersion spectroscopy (EDS) results further verified that the core area of the flame was aluminum and the outer flame region consisted of elemental oxygen and aluminum at an approximate ratio of 3 to 2.

UR - http://www.scopus.com/inward/record.url?scp=30744434125&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=30744434125&partnerID=8YFLogxK

M3 - Paper

SP - 8375

EP - 8388

ER -

Risha GA, Huang Y, Yetter RA, Yang V. Experimental investigation of aluminum particle dust cloud combustion. 2005. Paper presented at 43rd AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, United States.