Experimental investigation of initial and subsequent yield surfaces for laminated metal matrix composites

Research output: Contribution to journalArticle

10 Scopus citations

Abstract

The aim of this work is to construct yield surfaces to describe initial yielding and characterize hardening behavior of a highly anisotropic material. A methodology for constructing yield surfaces for isotropic materials using axial-torsion loading is extended to highly anisotropic materials. The technique uses a sensitive definition of yielding based on permanent strain rather than offset strain, and enables multiple yield points and multiple yield surfaces to be conducted on a single specimen. A target value of 20 × 10-6 is used for Al2O3 fiber reinforced aluminum laminates having a fiber volume fraction of 0.55. Sixteen radial probes are used to define the yield locus in the axial-shear stress plane. Initial yield surfaces for [04], [904], and [0/90]2 fibrous aluminum laminates are well described by ellipses in the axial-shear stress plane having aspect ratios of 10, 2.5, and 3.3, respectively. For reference, the aspect ratio of the Mises ellipse for an isotropic material is 1.73. Initial yield surfaces do not have a tension-compression asymmetry. Four overload profiles (plus, ex, hourglass, and zee) are applied to characterize hardening of a [0/90] 2 laminate by constructing 30 subsequent yield surfaces. Parameters to describe the center and axes of an ellipse are regressed to the yield points. The results clearly indicate that kinematic hardening dominates so that material state evolution can be described by tracking the center of the yield locus. For a nonproportional overload of (σ, τ) = (500, 70) MPa, the center of the yield locus translated to (σ, τ) = (430, 37) MPa and the ellipse major axis was only 110 MPa.

Original languageEnglish (US)
Pages (from-to)1606-1628
Number of pages23
JournalInternational journal of plasticity
Volume26
Issue number11
DOIs
StatePublished - Nov 1 2010

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Experimental investigation of initial and subsequent yield surfaces for laminated metal matrix composites'. Together they form a unique fingerprint.

  • Cite this