Experimental investigation of springback of dual-phase steels

Research output: Contribution to conferencePaper

1 Citation (Scopus)

Abstract

With a view to advancing the use of DP steels in the automotive industry, this research emphasizes the characterization of mechanical behavior and forming of DP sheet steels. Two grades of DP steels were studied, DP 600/300 and DP 600/400. Standard tension tests were used to characterize the mechanical behavior. Properties such as elongation to fracture, strength coefficient, n-value and ultimate tensile strength (UTS) were determined. Moreover, tension-compression tests were also conducted on the two steel grades considered to study the Bauschinger effect. In addition, simple bending experiments were done in directions 0, 45, and 90 degrees to the rolling direction, to examine the effect of rolling direction and material anisotropy on the springback angles in simple forming. Multiple-bend experiments were also conducted to study the effect of reverse yield on the final geometry of the formed part. It was found that the effect of planar anisotropy can be neglected and the influence of the Bauschinger effect on the springback angle is not very significant. Finally, draw-bend experiments were performed. The clamping force or blank-holding-force (BHF) was varied to study its effect on the final springback angles of the part.

Original languageEnglish (US)
DOIs
StatePublished - Dec 1 2005
Event2005 SAE World Congress - Detroit, MI, United States
Duration: Apr 11 2005Apr 14 2005

Other

Other2005 SAE World Congress
CountryUnited States
CityDetroit, MI
Period4/11/054/14/05

Fingerprint

Steel
Anisotropy
Experiments
Steel sheet
Automotive industry
Fracture toughness
Elongation
Tensile strength
Geometry

All Science Journal Classification (ASJC) codes

  • Automotive Engineering
  • Safety, Risk, Reliability and Quality
  • Pollution
  • Industrial and Manufacturing Engineering

Cite this

Ragai, I., & Nemes, J. (2005). Experimental investigation of springback of dual-phase steels. Paper presented at 2005 SAE World Congress, Detroit, MI, United States. https://doi.org/10.4271/2005-01-1332
Ragai, Ihab ; Nemes, James. / Experimental investigation of springback of dual-phase steels. Paper presented at 2005 SAE World Congress, Detroit, MI, United States.
@conference{a708c5792209425c97d4841da2ccdedd,
title = "Experimental investigation of springback of dual-phase steels",
abstract = "With a view to advancing the use of DP steels in the automotive industry, this research emphasizes the characterization of mechanical behavior and forming of DP sheet steels. Two grades of DP steels were studied, DP 600/300 and DP 600/400. Standard tension tests were used to characterize the mechanical behavior. Properties such as elongation to fracture, strength coefficient, n-value and ultimate tensile strength (UTS) were determined. Moreover, tension-compression tests were also conducted on the two steel grades considered to study the Bauschinger effect. In addition, simple bending experiments were done in directions 0, 45, and 90 degrees to the rolling direction, to examine the effect of rolling direction and material anisotropy on the springback angles in simple forming. Multiple-bend experiments were also conducted to study the effect of reverse yield on the final geometry of the formed part. It was found that the effect of planar anisotropy can be neglected and the influence of the Bauschinger effect on the springback angle is not very significant. Finally, draw-bend experiments were performed. The clamping force or blank-holding-force (BHF) was varied to study its effect on the final springback angles of the part.",
author = "Ihab Ragai and James Nemes",
year = "2005",
month = "12",
day = "1",
doi = "10.4271/2005-01-1332",
language = "English (US)",
note = "2005 SAE World Congress ; Conference date: 11-04-2005 Through 14-04-2005",

}

Ragai, I & Nemes, J 2005, 'Experimental investigation of springback of dual-phase steels', Paper presented at 2005 SAE World Congress, Detroit, MI, United States, 4/11/05 - 4/14/05. https://doi.org/10.4271/2005-01-1332

Experimental investigation of springback of dual-phase steels. / Ragai, Ihab; Nemes, James.

2005. Paper presented at 2005 SAE World Congress, Detroit, MI, United States.

Research output: Contribution to conferencePaper

TY - CONF

T1 - Experimental investigation of springback of dual-phase steels

AU - Ragai, Ihab

AU - Nemes, James

PY - 2005/12/1

Y1 - 2005/12/1

N2 - With a view to advancing the use of DP steels in the automotive industry, this research emphasizes the characterization of mechanical behavior and forming of DP sheet steels. Two grades of DP steels were studied, DP 600/300 and DP 600/400. Standard tension tests were used to characterize the mechanical behavior. Properties such as elongation to fracture, strength coefficient, n-value and ultimate tensile strength (UTS) were determined. Moreover, tension-compression tests were also conducted on the two steel grades considered to study the Bauschinger effect. In addition, simple bending experiments were done in directions 0, 45, and 90 degrees to the rolling direction, to examine the effect of rolling direction and material anisotropy on the springback angles in simple forming. Multiple-bend experiments were also conducted to study the effect of reverse yield on the final geometry of the formed part. It was found that the effect of planar anisotropy can be neglected and the influence of the Bauschinger effect on the springback angle is not very significant. Finally, draw-bend experiments were performed. The clamping force or blank-holding-force (BHF) was varied to study its effect on the final springback angles of the part.

AB - With a view to advancing the use of DP steels in the automotive industry, this research emphasizes the characterization of mechanical behavior and forming of DP sheet steels. Two grades of DP steels were studied, DP 600/300 and DP 600/400. Standard tension tests were used to characterize the mechanical behavior. Properties such as elongation to fracture, strength coefficient, n-value and ultimate tensile strength (UTS) were determined. Moreover, tension-compression tests were also conducted on the two steel grades considered to study the Bauschinger effect. In addition, simple bending experiments were done in directions 0, 45, and 90 degrees to the rolling direction, to examine the effect of rolling direction and material anisotropy on the springback angles in simple forming. Multiple-bend experiments were also conducted to study the effect of reverse yield on the final geometry of the formed part. It was found that the effect of planar anisotropy can be neglected and the influence of the Bauschinger effect on the springback angle is not very significant. Finally, draw-bend experiments were performed. The clamping force or blank-holding-force (BHF) was varied to study its effect on the final springback angles of the part.

UR - http://www.scopus.com/inward/record.url?scp=84877466479&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84877466479&partnerID=8YFLogxK

U2 - 10.4271/2005-01-1332

DO - 10.4271/2005-01-1332

M3 - Paper

ER -

Ragai I, Nemes J. Experimental investigation of springback of dual-phase steels. 2005. Paper presented at 2005 SAE World Congress, Detroit, MI, United States. https://doi.org/10.4271/2005-01-1332