Fabrication of smooth GaN-based laser facets

D. A. Stocker, E. F. Schubert, K. S. Boutros, Joan Marie Redwing

Research output: Contribution to journalConference articlepeer-review

1 Scopus citations

Abstract

A method is presented for fabricating fully wet-etched InGaN/GaN laser cavities using photoenhanced electrochemical wet etching followed by crystallographic wet etching. Crystallographic wet chemical etching of n- and p-type GaN grown on c-plane sapphire is achieved using H3PO4 and various hydroxides, with etch rates as high as 3.2 μm/min. The crystallographic GaN etch planes are {0001}, {101̄0}, {101̄1̄}, {101̄2̄}, and {101̄3}. vertical {101̄0} planes appear perfectly smooth when viewed with a field-effect scanning electron microscope (FESEM), indicating a surface roughness less than 5 nm, suitable for laser facets. The etch rate and crystallographic nature for the various etching solutions are independent of conductivity, as shown by seamless etching of a p-GaN/undoped, high-resistivity GaN homojunction.

Original languageEnglish (US)
JournalMaterials Research Society Symposium - Proceedings
Volume537
StatePublished - Dec 1 1999
EventProceedings of the 1998 MRS Fall Meeting - Symposium on 'GaN and Related Alloys' - Boston, MA, USA
Duration: Nov 30 1998Dec 4 1998

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Fabrication of smooth GaN-based laser facets'. Together they form a unique fingerprint.

Cite this