Face-shear mode ultrasonic tactile sensor array

Kyungrim Kim, Shujun Zhang, Jian Tian, Pengdi Han, Xiaoning Jiang

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Scopus citations

Abstract

Ultrasonic sensors using piezoelectric resonators are widely used for the chemical and biomedical applications because of their high sensitivity to applied loads, simple structures, and relatively low cost. In this study, we investigated an ultrasonic tactile sensing array using face-shear mode PMN-PT single crystal resonators, based on the sensing mechanism that electric impedance of a piezoelectric resonator is dependent on its surface acoustic load. An 8 × 8 sensing array was designed, fabricated and characterized. The electrical impedance changes induced by the applied surface loads including acoustic loads and surface forces were measured, and then, the contact shape of applied object was mapped by recording electric impedances of 64 elements.

Original languageEnglish (US)
Title of host publication2012 IEEE International Ultrasonics Symposium, IUS 2012
Pages1059-1062
Number of pages4
DOIs
StatePublished - 2012
Event2012 IEEE International Ultrasonics Symposium, IUS 2012 - Dresden, Germany
Duration: Oct 7 2012Oct 10 2012

Publication series

NameIEEE International Ultrasonics Symposium, IUS
ISSN (Print)1948-5719
ISSN (Electronic)1948-5727

Other

Other2012 IEEE International Ultrasonics Symposium, IUS 2012
CountryGermany
CityDresden
Period10/7/1210/10/12

All Science Journal Classification (ASJC) codes

  • Acoustics and Ultrasonics

Fingerprint Dive into the research topics of 'Face-shear mode ultrasonic tactile sensor array'. Together they form a unique fingerprint.

Cite this