Feasibility of past vertical forming utilizing single point incremental sheet forming

Tyler J. Grimm, Ihab Ragai, John Timothy Roth

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Incremental forming (IF) is a novel sheet material forming technique typically restricted to drafted geometries. By utilizing tooling which features regions that extend radial from the axis of the tool, it is proposed that this restriction can be eliminated. Additionally, by controlling the rotational motion of the tool, it is proposed that greater levels of detail can be achieved in the IF process. In the following works, the feasibility of utilizing this type of tooling in the IF process is discussed, as well as several variations of such tooling. Validation of the proposed tooling is also presented.

Original languageEnglish (US)
Title of host publicationAdvanced Manufacturing
PublisherAmerican Society of Mechanical Engineers (ASME)
ISBN (Electronic)9780791858356
DOIs
StatePublished - Jan 1 2017
EventASME 2017 International Mechanical Engineering Congress and Exposition, IMECE 2017 - Tampa, United States
Duration: Nov 3 2017Nov 9 2017

Publication series

NameASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
Volume2

Other

OtherASME 2017 International Mechanical Engineering Congress and Exposition, IMECE 2017
CountryUnited States
CityTampa
Period11/3/1711/9/17

Fingerprint

Geometry

All Science Journal Classification (ASJC) codes

  • Mechanical Engineering

Cite this

Grimm, T. J., Ragai, I., & Roth, J. T. (2017). Feasibility of past vertical forming utilizing single point incremental sheet forming. In Advanced Manufacturing (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); Vol. 2). American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/IMECE2017-71069
Grimm, Tyler J. ; Ragai, Ihab ; Roth, John Timothy. / Feasibility of past vertical forming utilizing single point incremental sheet forming. Advanced Manufacturing. American Society of Mechanical Engineers (ASME), 2017. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)).
@inproceedings{51743df203ff4490b3708e03ef47830a,
title = "Feasibility of past vertical forming utilizing single point incremental sheet forming",
abstract = "Incremental forming (IF) is a novel sheet material forming technique typically restricted to drafted geometries. By utilizing tooling which features regions that extend radial from the axis of the tool, it is proposed that this restriction can be eliminated. Additionally, by controlling the rotational motion of the tool, it is proposed that greater levels of detail can be achieved in the IF process. In the following works, the feasibility of utilizing this type of tooling in the IF process is discussed, as well as several variations of such tooling. Validation of the proposed tooling is also presented.",
author = "Grimm, {Tyler J.} and Ihab Ragai and Roth, {John Timothy}",
year = "2017",
month = "1",
day = "1",
doi = "10.1115/IMECE2017-71069",
language = "English (US)",
series = "ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)",
publisher = "American Society of Mechanical Engineers (ASME)",
booktitle = "Advanced Manufacturing",

}

Grimm, TJ, Ragai, I & Roth, JT 2017, Feasibility of past vertical forming utilizing single point incremental sheet forming. in Advanced Manufacturing. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), vol. 2, American Society of Mechanical Engineers (ASME), ASME 2017 International Mechanical Engineering Congress and Exposition, IMECE 2017, Tampa, United States, 11/3/17. https://doi.org/10.1115/IMECE2017-71069

Feasibility of past vertical forming utilizing single point incremental sheet forming. / Grimm, Tyler J.; Ragai, Ihab; Roth, John Timothy.

Advanced Manufacturing. American Society of Mechanical Engineers (ASME), 2017. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); Vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - Feasibility of past vertical forming utilizing single point incremental sheet forming

AU - Grimm, Tyler J.

AU - Ragai, Ihab

AU - Roth, John Timothy

PY - 2017/1/1

Y1 - 2017/1/1

N2 - Incremental forming (IF) is a novel sheet material forming technique typically restricted to drafted geometries. By utilizing tooling which features regions that extend radial from the axis of the tool, it is proposed that this restriction can be eliminated. Additionally, by controlling the rotational motion of the tool, it is proposed that greater levels of detail can be achieved in the IF process. In the following works, the feasibility of utilizing this type of tooling in the IF process is discussed, as well as several variations of such tooling. Validation of the proposed tooling is also presented.

AB - Incremental forming (IF) is a novel sheet material forming technique typically restricted to drafted geometries. By utilizing tooling which features regions that extend radial from the axis of the tool, it is proposed that this restriction can be eliminated. Additionally, by controlling the rotational motion of the tool, it is proposed that greater levels of detail can be achieved in the IF process. In the following works, the feasibility of utilizing this type of tooling in the IF process is discussed, as well as several variations of such tooling. Validation of the proposed tooling is also presented.

UR - http://www.scopus.com/inward/record.url?scp=85040936351&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85040936351&partnerID=8YFLogxK

U2 - 10.1115/IMECE2017-71069

DO - 10.1115/IMECE2017-71069

M3 - Conference contribution

AN - SCOPUS:85040936351

T3 - ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

BT - Advanced Manufacturing

PB - American Society of Mechanical Engineers (ASME)

ER -

Grimm TJ, Ragai I, Roth JT. Feasibility of past vertical forming utilizing single point incremental sheet forming. In Advanced Manufacturing. American Society of Mechanical Engineers (ASME). 2017. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)). https://doi.org/10.1115/IMECE2017-71069