Feasibility Study of the Potential Use of Drill Cuttings in Concrete

Ehsan Mostavi, Somayeh Asadi, Elumeze Ugochukwu

Research output: Contribution to journalConference article

14 Citations (Scopus)

Abstract

Increasing the need of energy and its high price tempts companies to drill more oil wells every day and create more drilling waste. Most of these drilling wastes are managed to be disposed but they will always have many environmental impacts. Therefore, this study investigates the potential of using drill cuttings in concrete as a partial replacement of cement. The innovation of this study is not only to produce a new and cost-effective material from drill cuttings, but also to mitigate its negative environmental impacts. To achieve this objective, laboratory studies carried out to quantify the compressive strength of concrete samples and to determine the chemical composition of drill cuttings. Results showed that replacing 5% of cement with dried drill cuttings reduces the compressive strength of concrete by 10%. However, comprehensive strength of concrete samples decreases by 20% when replacing 10, 15, and 20% of cement with drill cuttings. Furthermore, the effect of some additives such as fly ash and silica fume on the compressive strength of the concrete samples containing drill cuttings was studied. It was concluded that adding these additives have a significant influence on the compressive strength of concrete samples containing 20% drill cuttings.

Original languageEnglish (US)
Pages (from-to)1015-1023
Number of pages9
JournalProcedia Engineering
Volume118
DOIs
StatePublished - Jan 1 2015
EventInternational Conference on Sustainable Design, Engineering and Construction, ICSDEC 2015 - Chicago, United States
Duration: May 10 2015May 13 2015

Fingerprint

Concretes
Compressive strength
Cements
Oil well drills
Environmental impact
Drilling
Silica fume
Fly ash
Innovation
Chemical analysis
Costs
Industry

All Science Journal Classification (ASJC) codes

  • Engineering(all)

Cite this

Mostavi, Ehsan ; Asadi, Somayeh ; Ugochukwu, Elumeze. / Feasibility Study of the Potential Use of Drill Cuttings in Concrete. In: Procedia Engineering. 2015 ; Vol. 118. pp. 1015-1023.
@article{d2463c5ada4641d99ed78c3164ae4e96,
title = "Feasibility Study of the Potential Use of Drill Cuttings in Concrete",
abstract = "Increasing the need of energy and its high price tempts companies to drill more oil wells every day and create more drilling waste. Most of these drilling wastes are managed to be disposed but they will always have many environmental impacts. Therefore, this study investigates the potential of using drill cuttings in concrete as a partial replacement of cement. The innovation of this study is not only to produce a new and cost-effective material from drill cuttings, but also to mitigate its negative environmental impacts. To achieve this objective, laboratory studies carried out to quantify the compressive strength of concrete samples and to determine the chemical composition of drill cuttings. Results showed that replacing 5{\%} of cement with dried drill cuttings reduces the compressive strength of concrete by 10{\%}. However, comprehensive strength of concrete samples decreases by 20{\%} when replacing 10, 15, and 20{\%} of cement with drill cuttings. Furthermore, the effect of some additives such as fly ash and silica fume on the compressive strength of the concrete samples containing drill cuttings was studied. It was concluded that adding these additives have a significant influence on the compressive strength of concrete samples containing 20{\%} drill cuttings.",
author = "Ehsan Mostavi and Somayeh Asadi and Elumeze Ugochukwu",
year = "2015",
month = "1",
day = "1",
doi = "10.1016/j.proeng.2015.08.543",
language = "English (US)",
volume = "118",
pages = "1015--1023",
journal = "Procedia Engineering",
issn = "1877-7058",
publisher = "Elsevier BV",

}

Feasibility Study of the Potential Use of Drill Cuttings in Concrete. / Mostavi, Ehsan; Asadi, Somayeh; Ugochukwu, Elumeze.

In: Procedia Engineering, Vol. 118, 01.01.2015, p. 1015-1023.

Research output: Contribution to journalConference article

TY - JOUR

T1 - Feasibility Study of the Potential Use of Drill Cuttings in Concrete

AU - Mostavi, Ehsan

AU - Asadi, Somayeh

AU - Ugochukwu, Elumeze

PY - 2015/1/1

Y1 - 2015/1/1

N2 - Increasing the need of energy and its high price tempts companies to drill more oil wells every day and create more drilling waste. Most of these drilling wastes are managed to be disposed but they will always have many environmental impacts. Therefore, this study investigates the potential of using drill cuttings in concrete as a partial replacement of cement. The innovation of this study is not only to produce a new and cost-effective material from drill cuttings, but also to mitigate its negative environmental impacts. To achieve this objective, laboratory studies carried out to quantify the compressive strength of concrete samples and to determine the chemical composition of drill cuttings. Results showed that replacing 5% of cement with dried drill cuttings reduces the compressive strength of concrete by 10%. However, comprehensive strength of concrete samples decreases by 20% when replacing 10, 15, and 20% of cement with drill cuttings. Furthermore, the effect of some additives such as fly ash and silica fume on the compressive strength of the concrete samples containing drill cuttings was studied. It was concluded that adding these additives have a significant influence on the compressive strength of concrete samples containing 20% drill cuttings.

AB - Increasing the need of energy and its high price tempts companies to drill more oil wells every day and create more drilling waste. Most of these drilling wastes are managed to be disposed but they will always have many environmental impacts. Therefore, this study investigates the potential of using drill cuttings in concrete as a partial replacement of cement. The innovation of this study is not only to produce a new and cost-effective material from drill cuttings, but also to mitigate its negative environmental impacts. To achieve this objective, laboratory studies carried out to quantify the compressive strength of concrete samples and to determine the chemical composition of drill cuttings. Results showed that replacing 5% of cement with dried drill cuttings reduces the compressive strength of concrete by 10%. However, comprehensive strength of concrete samples decreases by 20% when replacing 10, 15, and 20% of cement with drill cuttings. Furthermore, the effect of some additives such as fly ash and silica fume on the compressive strength of the concrete samples containing drill cuttings was studied. It was concluded that adding these additives have a significant influence on the compressive strength of concrete samples containing 20% drill cuttings.

UR - http://www.scopus.com/inward/record.url?scp=84948436311&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84948436311&partnerID=8YFLogxK

U2 - 10.1016/j.proeng.2015.08.543

DO - 10.1016/j.proeng.2015.08.543

M3 - Conference article

AN - SCOPUS:84948436311

VL - 118

SP - 1015

EP - 1023

JO - Procedia Engineering

JF - Procedia Engineering

SN - 1877-7058

ER -