Finite element mode shapes of an aluminum ribbed panel

Stephen A. Hambric; Mathew J. Erickson; Dean E. Capone; Courtney B. Burroughs

Finite element mode shapes of an aluminum ribbed panel

Stephen A. Hambric, Mathew J. Erickson, Dean E. Capone, Courtney B. Burroughs

Applied Research Laboratory (ARL)

Research output: Contribution to journal › Conference article › peer-review

Abstract

An aluminum ribbed panel modes is predicted using finite element model and the results are compared with other models and measured modes. It is shown that the modes predicted by the model compare well to experimental data. The quadratic solid model compares particularly well, while the plate/beam model underpredicts frequencies of a few global plate modes.

Original language	English (US)
Pages (from-to)	245-250
Number of pages	6
Journal	Proceedings - National Conference on Noise Control Engineering
Volume	1
State	Published - Dec 1 1997
Event	Proceedings of the 1997 National Conference on Noise Control Engineering , NOISE-CON. Part 2 (of 2) - University Park, PA, USA Duration: Jun 15 1997 → Jun 17 1997

All Science Journal Classification (ASJC) codes

Acoustics and Ultrasonics

Cite this

@article{e3a21b9644ac49d69d649adf039efda9,

title = "Finite element mode shapes of an aluminum ribbed panel",

abstract = "An aluminum ribbed panel modes is predicted using finite element model and the results are compared with other models and measured modes. It is shown that the modes predicted by the model compare well to experimental data. The quadratic solid model compares particularly well, while the plate/beam model underpredicts frequencies of a few global plate modes.",

author = "Hambric, {Stephen A.} and Erickson, {Mathew J.} and Capone, {Dean E.} and Burroughs, {Courtney B.}",

year = "1997",

month = dec,

day = "1",

language = "English (US)",

volume = "1",

pages = "245--250",

journal = "Proceedings - National Conference on Noise Control Engineering",

issn = "0736-2935",

note = "Proceedings of the 1997 National Conference on Noise Control Engineering , NOISE-CON. Part 2 (of 2) ; Conference date: 15-06-1997 Through 17-06-1997",

}

TY - JOUR

T1 - Finite element mode shapes of an aluminum ribbed panel

AU - Hambric, Stephen A.

AU - Erickson, Mathew J.

AU - Capone, Dean E.

AU - Burroughs, Courtney B.

PY - 1997/12/1

Y1 - 1997/12/1

N2 - An aluminum ribbed panel modes is predicted using finite element model and the results are compared with other models and measured modes. It is shown that the modes predicted by the model compare well to experimental data. The quadratic solid model compares particularly well, while the plate/beam model underpredicts frequencies of a few global plate modes.

AB - An aluminum ribbed panel modes is predicted using finite element model and the results are compared with other models and measured modes. It is shown that the modes predicted by the model compare well to experimental data. The quadratic solid model compares particularly well, while the plate/beam model underpredicts frequencies of a few global plate modes.

UR - http://www.scopus.com/inward/record.url?scp=0031385589&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0031385589&partnerID=8YFLogxK

M3 - Conference article

AN - SCOPUS:0031385589

VL - 1

SP - 245

EP - 250

JO - Proceedings - National Conference on Noise Control Engineering

JF - Proceedings - National Conference on Noise Control Engineering

SN - 0736-2935

T2 - Proceedings of the 1997 National Conference on Noise Control Engineering , NOISE-CON. Part 2 (of 2)

Y2 - 15 June 1997 through 17 June 1997

ER -

Finite element mode shapes of an aluminum ribbed panel

Abstract

All Science Journal Classification (ASJC) codes

Other files and links

Fingerprint

Cite this