Framework for dynamic tolerance control in discrete part manufacturing

Research output: Contribution to conferencePaper

Abstract

The traditional means of tolerance control in manufacturing based on static pre-production tolerance chart analysis to set in process tolerance, followed by conventional process control activities to maintain required tolerances, present several limitations. This tolerance management strategy may be too rigid for current and future, integrated automated manufacturing environments. This paper presents a framework, and discusses elements required to create and implement global, dynamic tolerance management when machining discrete parts. A graph based representation of machining sequence and new mathematical models for both the pre-production deterministic and stochastic tolerance distribution are presented. Use of feedback from sensors to enable use of an on-line stochastic tolerance chart to evaluate actual yield is discussed. Actual yield will then be the basis upon which necessary corrective actions, globally optimized over the whole set of machining operations, are undertaken to close the loop.

Original languageEnglish (US)
Pages65-80
Number of pages16
StatePublished - Dec 1 1990
EventWinter Annual Meeting of the American Society of Mechanical Engineers - Dallas, TX, USA
Duration: Nov 25 1990Nov 30 1990

Other

OtherWinter Annual Meeting of the American Society of Mechanical Engineers
CityDallas, TX, USA
Period11/25/9011/30/90

Fingerprint

Machining
Process control
Mathematical models
Feedback
Sensors

All Science Journal Classification (ASJC) codes

  • Industrial and Manufacturing Engineering
  • Mechanical Engineering

Cite this

Lehtihet, E., & Joshi, S. B. (1990). Framework for dynamic tolerance control in discrete part manufacturing. 65-80. Paper presented at Winter Annual Meeting of the American Society of Mechanical Engineers, Dallas, TX, USA, .
Lehtihet, El-amine ; Joshi, Sanjay B. / Framework for dynamic tolerance control in discrete part manufacturing. Paper presented at Winter Annual Meeting of the American Society of Mechanical Engineers, Dallas, TX, USA, .16 p.
@conference{f4e33962a5664b30862e9827c372ddac,
title = "Framework for dynamic tolerance control in discrete part manufacturing",
abstract = "The traditional means of tolerance control in manufacturing based on static pre-production tolerance chart analysis to set in process tolerance, followed by conventional process control activities to maintain required tolerances, present several limitations. This tolerance management strategy may be too rigid for current and future, integrated automated manufacturing environments. This paper presents a framework, and discusses elements required to create and implement global, dynamic tolerance management when machining discrete parts. A graph based representation of machining sequence and new mathematical models for both the pre-production deterministic and stochastic tolerance distribution are presented. Use of feedback from sensors to enable use of an on-line stochastic tolerance chart to evaluate actual yield is discussed. Actual yield will then be the basis upon which necessary corrective actions, globally optimized over the whole set of machining operations, are undertaken to close the loop.",
author = "El-amine Lehtihet and Joshi, {Sanjay B.}",
year = "1990",
month = "12",
day = "1",
language = "English (US)",
pages = "65--80",
note = "Winter Annual Meeting of the American Society of Mechanical Engineers ; Conference date: 25-11-1990 Through 30-11-1990",

}

Lehtihet, E & Joshi, SB 1990, 'Framework for dynamic tolerance control in discrete part manufacturing' Paper presented at Winter Annual Meeting of the American Society of Mechanical Engineers, Dallas, TX, USA, 11/25/90 - 11/30/90, pp. 65-80.

Framework for dynamic tolerance control in discrete part manufacturing. / Lehtihet, El-amine; Joshi, Sanjay B.

1990. 65-80 Paper presented at Winter Annual Meeting of the American Society of Mechanical Engineers, Dallas, TX, USA, .

Research output: Contribution to conferencePaper

TY - CONF

T1 - Framework for dynamic tolerance control in discrete part manufacturing

AU - Lehtihet, El-amine

AU - Joshi, Sanjay B.

PY - 1990/12/1

Y1 - 1990/12/1

N2 - The traditional means of tolerance control in manufacturing based on static pre-production tolerance chart analysis to set in process tolerance, followed by conventional process control activities to maintain required tolerances, present several limitations. This tolerance management strategy may be too rigid for current and future, integrated automated manufacturing environments. This paper presents a framework, and discusses elements required to create and implement global, dynamic tolerance management when machining discrete parts. A graph based representation of machining sequence and new mathematical models for both the pre-production deterministic and stochastic tolerance distribution are presented. Use of feedback from sensors to enable use of an on-line stochastic tolerance chart to evaluate actual yield is discussed. Actual yield will then be the basis upon which necessary corrective actions, globally optimized over the whole set of machining operations, are undertaken to close the loop.

AB - The traditional means of tolerance control in manufacturing based on static pre-production tolerance chart analysis to set in process tolerance, followed by conventional process control activities to maintain required tolerances, present several limitations. This tolerance management strategy may be too rigid for current and future, integrated automated manufacturing environments. This paper presents a framework, and discusses elements required to create and implement global, dynamic tolerance management when machining discrete parts. A graph based representation of machining sequence and new mathematical models for both the pre-production deterministic and stochastic tolerance distribution are presented. Use of feedback from sensors to enable use of an on-line stochastic tolerance chart to evaluate actual yield is discussed. Actual yield will then be the basis upon which necessary corrective actions, globally optimized over the whole set of machining operations, are undertaken to close the loop.

UR - http://www.scopus.com/inward/record.url?scp=0025638041&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0025638041&partnerID=8YFLogxK

M3 - Paper

AN - SCOPUS:0025638041

SP - 65

EP - 80

ER -

Lehtihet E, Joshi SB. Framework for dynamic tolerance control in discrete part manufacturing. 1990. Paper presented at Winter Annual Meeting of the American Society of Mechanical Engineers, Dallas, TX, USA, .