Gas stratification break-up by a vertical jet: Simulations using the GOTHIC code

Michele Andreani, Ralf Kapulla, Robert Zboray

    Research output: Contribution to journalArticle

    26 Scopus citations

    Abstract

    The capability assessment of three-dimensional computational tools to predict the erosion and the break-up of stratified conditions that can build-up in a containment through the release of hydrogen during an early phase of a hypothetical severe accident is the focus of intense research worldwide. In conjunction with the OECD SETH-2 project, the GOTHIC code is assessed against experiments in which mass and/or heat sources or sinks cause mixing. This paper reports on simulation results of selected experiments where the initial helium stratification in a vessel is eroded by a vertical jet originating from an injection below the initial density interface. A 3-D coarse mesh, as well as various finer 2-D meshes, is used to simulate the evolution of the helium distribution generated by jets having different initial momentum. In general, the 3-D calculations predict too slow mixing in the vessel and a reasonable agreement between calculated and measured gas concentrations can only be achieved with a sufficiently fine mesh. These results can be explained by comparing the calculated velocity field with that measured using the PIV technique, which also provides valuable insight into the mechanisms of the interaction between the jet and the density interface.

    Original languageEnglish (US)
    Pages (from-to)71-81
    Number of pages11
    JournalNuclear Engineering and Design
    Volume249
    DOIs
    StatePublished - Aug 1 2012

      Fingerprint

    All Science Journal Classification (ASJC) codes

    • Nuclear and High Energy Physics
    • Nuclear Energy and Engineering
    • Materials Science(all)
    • Safety, Risk, Reliability and Quality
    • Waste Management and Disposal
    • Mechanical Engineering

    Cite this