Gearbox health monitoring experiment using uibration signals

Research output: Contribution to journalArticle

1 Scopus citations

Abstract

Machine deterioration prognosis is one of the most important considerations to reduce the cost of maintenance. This experiment demonstrates the processing of ribration signals for gear fault detection. An artificial defect teas introduced to the gearbox as a full tooth breakage (missing tooth). Vibration signals were collected for run-up operation and at some fixed speeds. The kurtosis statisticeal parameter teas used as a measure of impact sererily in the time domain of the ribndion signal. The fast Fourier transform (FFT) and the wavelet analysis (two widely applied techniques for machine health monitoring) were also used for spur gear fault detection. The kurtosis was found to be higher for the case of faulty gears. Also, the experiment demonstrated that both FFT and warelet techniques were very sensitive to gear faulls and imperfections.

Original languageEnglish (US)
Pages (from-to)26-31
Number of pages6
JournalJournal of Engineering Technology
Volume24
Issue number1
StatePublished - Dec 1 2007

All Science Journal Classification (ASJC) codes

  • Engineering(all)

Fingerprint Dive into the research topics of 'Gearbox health monitoring experiment using uibration signals'. Together they form a unique fingerprint.

  • Cite this