Geometry and kinematics of conjugate meshing face-gear pairs

Zihni B. Saribay, Robert C. Bill, Edward Smith, Suren B. Rao

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

The conjugatemeshing face-gear pairs are implemented to high shaft angle intersecting axis gear trains such as the pericyclic transmission system. The generation of meshing face-gear tooth surfaces with a mutually conjugate spur shaper is presented. Principal geometric relations between meshing face gears and the shaper are developed based on fundamentals of gearing. The tooth geometry and the dimensions of the conjugate face-gear pair are established based on theory of gearing and differentiable geometry. Unloaded meshing kinematics of the face-gear to face-gear meshing is assessed. The tooth surface normal vectors, axodes of meshing, and the sliding velocities are illustrated. Numerical examples are conducted to present the geometry and kinematics of the meshing face-gear pairs.

Original languageEnglish (US)
Article number032008
JournalJournal of the American Helicopter Society
Volume62
Issue number3
DOIs
StatePublished - Jul 1 2017

Fingerprint

Gears
Kinematics
Geometry
Gear teeth
Shafts (machine components)

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Aerospace Engineering
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Saribay, Zihni B. ; Bill, Robert C. ; Smith, Edward ; Rao, Suren B. / Geometry and kinematics of conjugate meshing face-gear pairs. In: Journal of the American Helicopter Society. 2017 ; Vol. 62, No. 3.
@article{d361fd8ceca1479b946fbc342b848a8d,
title = "Geometry and kinematics of conjugate meshing face-gear pairs",
abstract = "The conjugatemeshing face-gear pairs are implemented to high shaft angle intersecting axis gear trains such as the pericyclic transmission system. The generation of meshing face-gear tooth surfaces with a mutually conjugate spur shaper is presented. Principal geometric relations between meshing face gears and the shaper are developed based on fundamentals of gearing. The tooth geometry and the dimensions of the conjugate face-gear pair are established based on theory of gearing and differentiable geometry. Unloaded meshing kinematics of the face-gear to face-gear meshing is assessed. The tooth surface normal vectors, axodes of meshing, and the sliding velocities are illustrated. Numerical examples are conducted to present the geometry and kinematics of the meshing face-gear pairs.",
author = "Saribay, {Zihni B.} and Bill, {Robert C.} and Edward Smith and Rao, {Suren B.}",
year = "2017",
month = "7",
day = "1",
doi = "10.4050/JAHS.62.032008",
language = "English (US)",
volume = "62",
journal = "Journal of the American Helicopter Society",
issn = "0002-8711",
publisher = "American Helicopter Society",
number = "3",

}

Geometry and kinematics of conjugate meshing face-gear pairs. / Saribay, Zihni B.; Bill, Robert C.; Smith, Edward; Rao, Suren B.

In: Journal of the American Helicopter Society, Vol. 62, No. 3, 032008, 01.07.2017.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Geometry and kinematics of conjugate meshing face-gear pairs

AU - Saribay, Zihni B.

AU - Bill, Robert C.

AU - Smith, Edward

AU - Rao, Suren B.

PY - 2017/7/1

Y1 - 2017/7/1

N2 - The conjugatemeshing face-gear pairs are implemented to high shaft angle intersecting axis gear trains such as the pericyclic transmission system. The generation of meshing face-gear tooth surfaces with a mutually conjugate spur shaper is presented. Principal geometric relations between meshing face gears and the shaper are developed based on fundamentals of gearing. The tooth geometry and the dimensions of the conjugate face-gear pair are established based on theory of gearing and differentiable geometry. Unloaded meshing kinematics of the face-gear to face-gear meshing is assessed. The tooth surface normal vectors, axodes of meshing, and the sliding velocities are illustrated. Numerical examples are conducted to present the geometry and kinematics of the meshing face-gear pairs.

AB - The conjugatemeshing face-gear pairs are implemented to high shaft angle intersecting axis gear trains such as the pericyclic transmission system. The generation of meshing face-gear tooth surfaces with a mutually conjugate spur shaper is presented. Principal geometric relations between meshing face gears and the shaper are developed based on fundamentals of gearing. The tooth geometry and the dimensions of the conjugate face-gear pair are established based on theory of gearing and differentiable geometry. Unloaded meshing kinematics of the face-gear to face-gear meshing is assessed. The tooth surface normal vectors, axodes of meshing, and the sliding velocities are illustrated. Numerical examples are conducted to present the geometry and kinematics of the meshing face-gear pairs.

UR - http://www.scopus.com/inward/record.url?scp=85024921750&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85024921750&partnerID=8YFLogxK

U2 - 10.4050/JAHS.62.032008

DO - 10.4050/JAHS.62.032008

M3 - Article

VL - 62

JO - Journal of the American Helicopter Society

JF - Journal of the American Helicopter Society

SN - 0002-8711

IS - 3

M1 - 032008

ER -