Heat transfer evaluation on ice roughened cylinders in transition regime

Yiqiang Han, Jose Palacios

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

A high-resolution, non-intrusive heat transfer measurement method based on infra-red thermography and transient heat transfer analysis is presented. This technique was successfully applied to ice-roughened cylinders made from castings of natural accreted impact ice surface roughness. A total of eight representative icing conditions that contain two time series (30s, 60s, 90s, and 120s) were reproduced at the Adverse Environment Rotor Test Stand facility at the Pennsylvania State University. The ice roughness was retained using ice molding and casting techniques. Roughness on casting models was categorized into a smooth zone and a rough zone. Smooth to rough zone transition location and ice limit of each case was recorded. Arithmetic averages of roughness height (Ra) were measured for 10 locations (0°-90° azimuth angle) for each of the casting models. Empirical predictions for both maximum roughness height and smooth zone width have been proposed and resulted in mean absolute deviations of 15% and 7% respectively. Heat transfer measurements were conducted in a low-speed wind tunnel using thermal transient infra-red measurement techniques and validated against multiple embedded heat flux sensors as well as reference data found in the literature. The measured heat transfer coefficients were compared at three different test speeds (Re = 1, 2, 3×105). Scaling of the heat transfer measurements at the turbulent regime was found necessary during comparison. A novel scaling coefficient for heat transfer in a turbulent regime, relates the Stanton and the Reynolds number (CSR) was introduced and has been proved to successfully scale the results from Re = 4.8×104 to 4×106.

Original languageEnglish (US)
Title of host publication8th AIAA Atmospheric and Space Environments Conference
PublisherAmerican Institute of Aeronautics and Astronautics Inc, AIAA
ISBN (Print)9781624104336
StatePublished - Jan 1 2016
Event8th AIAA Atmospheric and Space Environments Conference, 2016 - Washington, United States
Duration: Jun 13 2016Jun 17 2016

Other

Other8th AIAA Atmospheric and Space Environments Conference, 2016
CountryUnited States
CityWashington
Period6/13/166/17/16

Fingerprint

heat transfer
ice
roughness
evaluation
low speed wind tunnels
scaling
ice formation
test stands
heat transfer coefficients
azimuth
rotors
measurement method
heat flux
Reynolds number
wind tunnel
surface roughness
transition zone
deviation
time series
sensor

All Science Journal Classification (ASJC) codes

  • Space and Planetary Science
  • Atmospheric Science

Cite this

Han, Y., & Palacios, J. (2016). Heat transfer evaluation on ice roughened cylinders in transition regime. In 8th AIAA Atmospheric and Space Environments Conference American Institute of Aeronautics and Astronautics Inc, AIAA.
Han, Yiqiang ; Palacios, Jose. / Heat transfer evaluation on ice roughened cylinders in transition regime. 8th AIAA Atmospheric and Space Environments Conference. American Institute of Aeronautics and Astronautics Inc, AIAA, 2016.
@inproceedings{52a39e2e633f4d8fbb01478ea3c21282,
title = "Heat transfer evaluation on ice roughened cylinders in transition regime",
abstract = "A high-resolution, non-intrusive heat transfer measurement method based on infra-red thermography and transient heat transfer analysis is presented. This technique was successfully applied to ice-roughened cylinders made from castings of natural accreted impact ice surface roughness. A total of eight representative icing conditions that contain two time series (30s, 60s, 90s, and 120s) were reproduced at the Adverse Environment Rotor Test Stand facility at the Pennsylvania State University. The ice roughness was retained using ice molding and casting techniques. Roughness on casting models was categorized into a smooth zone and a rough zone. Smooth to rough zone transition location and ice limit of each case was recorded. Arithmetic averages of roughness height (Ra) were measured for 10 locations (0°-90° azimuth angle) for each of the casting models. Empirical predictions for both maximum roughness height and smooth zone width have been proposed and resulted in mean absolute deviations of 15{\%} and 7{\%} respectively. Heat transfer measurements were conducted in a low-speed wind tunnel using thermal transient infra-red measurement techniques and validated against multiple embedded heat flux sensors as well as reference data found in the literature. The measured heat transfer coefficients were compared at three different test speeds (Re = 1, 2, 3×105). Scaling of the heat transfer measurements at the turbulent regime was found necessary during comparison. A novel scaling coefficient for heat transfer in a turbulent regime, relates the Stanton and the Reynolds number (CSR) was introduced and has been proved to successfully scale the results from Re = 4.8×104 to 4×106.",
author = "Yiqiang Han and Jose Palacios",
year = "2016",
month = "1",
day = "1",
language = "English (US)",
isbn = "9781624104336",
booktitle = "8th AIAA Atmospheric and Space Environments Conference",
publisher = "American Institute of Aeronautics and Astronautics Inc, AIAA",

}

Han, Y & Palacios, J 2016, Heat transfer evaluation on ice roughened cylinders in transition regime. in 8th AIAA Atmospheric and Space Environments Conference. American Institute of Aeronautics and Astronautics Inc, AIAA, 8th AIAA Atmospheric and Space Environments Conference, 2016, Washington, United States, 6/13/16.

Heat transfer evaluation on ice roughened cylinders in transition regime. / Han, Yiqiang; Palacios, Jose.

8th AIAA Atmospheric and Space Environments Conference. American Institute of Aeronautics and Astronautics Inc, AIAA, 2016.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - Heat transfer evaluation on ice roughened cylinders in transition regime

AU - Han, Yiqiang

AU - Palacios, Jose

PY - 2016/1/1

Y1 - 2016/1/1

N2 - A high-resolution, non-intrusive heat transfer measurement method based on infra-red thermography and transient heat transfer analysis is presented. This technique was successfully applied to ice-roughened cylinders made from castings of natural accreted impact ice surface roughness. A total of eight representative icing conditions that contain two time series (30s, 60s, 90s, and 120s) were reproduced at the Adverse Environment Rotor Test Stand facility at the Pennsylvania State University. The ice roughness was retained using ice molding and casting techniques. Roughness on casting models was categorized into a smooth zone and a rough zone. Smooth to rough zone transition location and ice limit of each case was recorded. Arithmetic averages of roughness height (Ra) were measured for 10 locations (0°-90° azimuth angle) for each of the casting models. Empirical predictions for both maximum roughness height and smooth zone width have been proposed and resulted in mean absolute deviations of 15% and 7% respectively. Heat transfer measurements were conducted in a low-speed wind tunnel using thermal transient infra-red measurement techniques and validated against multiple embedded heat flux sensors as well as reference data found in the literature. The measured heat transfer coefficients were compared at three different test speeds (Re = 1, 2, 3×105). Scaling of the heat transfer measurements at the turbulent regime was found necessary during comparison. A novel scaling coefficient for heat transfer in a turbulent regime, relates the Stanton and the Reynolds number (CSR) was introduced and has been proved to successfully scale the results from Re = 4.8×104 to 4×106.

AB - A high-resolution, non-intrusive heat transfer measurement method based on infra-red thermography and transient heat transfer analysis is presented. This technique was successfully applied to ice-roughened cylinders made from castings of natural accreted impact ice surface roughness. A total of eight representative icing conditions that contain two time series (30s, 60s, 90s, and 120s) were reproduced at the Adverse Environment Rotor Test Stand facility at the Pennsylvania State University. The ice roughness was retained using ice molding and casting techniques. Roughness on casting models was categorized into a smooth zone and a rough zone. Smooth to rough zone transition location and ice limit of each case was recorded. Arithmetic averages of roughness height (Ra) were measured for 10 locations (0°-90° azimuth angle) for each of the casting models. Empirical predictions for both maximum roughness height and smooth zone width have been proposed and resulted in mean absolute deviations of 15% and 7% respectively. Heat transfer measurements were conducted in a low-speed wind tunnel using thermal transient infra-red measurement techniques and validated against multiple embedded heat flux sensors as well as reference data found in the literature. The measured heat transfer coefficients were compared at three different test speeds (Re = 1, 2, 3×105). Scaling of the heat transfer measurements at the turbulent regime was found necessary during comparison. A novel scaling coefficient for heat transfer in a turbulent regime, relates the Stanton and the Reynolds number (CSR) was introduced and has been proved to successfully scale the results from Re = 4.8×104 to 4×106.

UR - http://www.scopus.com/inward/record.url?scp=84979941611&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84979941611&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:84979941611

SN - 9781624104336

BT - 8th AIAA Atmospheric and Space Environments Conference

PB - American Institute of Aeronautics and Astronautics Inc, AIAA

ER -

Han Y, Palacios J. Heat transfer evaluation on ice roughened cylinders in transition regime. In 8th AIAA Atmospheric and Space Environments Conference. American Institute of Aeronautics and Astronautics Inc, AIAA. 2016